Musicians - Quick Question ::: - GoFuckYourself.com

DeanCapture · 11-05-2006, 08:32 PM

Hey guys - I bought a Roland Dr-880 Drum Machine and I can't figure out how I should hook this up to my computer for recording. Which output should I use? Here's a pic of the back of the unit. Any of you guys have this machine? This thing freaks me out 'cause it sounds soooo good

seeric · 11-05-2006, 08:39 PM

well to do it the right way you should get a sound card with a midi in and out. there are several out there for about 120 bucks.

also, depends what kind of recording you want to do with it.

TreasureBucks · 11-05-2006, 08:53 PM

/\ what he said.

AsianDivaGirlsWebDude · 11-05-2006, 09:03 PM

RTFM...read the fucking manual...

ADG Webmaster

Linguist · 11-05-2006, 09:08 PM

It's a drum machine, it doesn't NEED to send MIDI out. Do this:

Get a cord with 1/4" males on both sides (would fit into L/MONO slot, same one as you'd use for electric guitar to amp), get a 1/4" -> 1/8" adapter (im not sure if it's 1/8", but it should be same size as the one on mp3 player headphones). Plug 1/8" into AUDIO IN slot or MICROPHONE slot in your soundcard. AUDIO IN will sound much better than MICROPHONE slot.

As Airek suggested, you may want a new sound card to make full use of the beast.

Lemme know if you need more help.

Linguist · 11-05-2006, 09:12 PM

Btw, have you plugged any other instruments into your computer before? Like an electric guitar?

DeanCapture · 11-05-2006, 09:17 PM

Quote:

Originally Posted by Linguist

Btw, have you plugged any other instruments into your computer before? Like an electric guitar?

No, I've never done any recording like that before. I just picked up a PodXT for my guitar and a Base Pod for my bass. These plug right into the computer via USB for recording (although I haven't yet connected them to the computer). The drum machine is new as well and although I have read the manual, it doesn't explain how to hook it up to the computer for recording (or if it does explain this...I'm not understanding it).

Thanks for the advice

Linguist · 11-05-2006, 09:21 PM

Quote:

Originally Posted by DeanCapture

No, I've never done any recording like that before. I just picked up a PodXT for my guitar and a Base Pod for my bass. These plug right into the computer via USB for recording (although I haven't yet connected them to the computer). The drum machine is new as well and although I have read the manual, it doesn't explain how to hook it up to the computer for recording (or if it does explain this...I'm not understanding it).

Thanks for the advice

This may be a fairly ghetto way of doing, but try plugging the L/MONO slot in drum machine into PodXT (or base pod)

It may as well work, and you may end up with extra distortion effects on the drums to play around with hehe

If you're spending the money on gear, I'd recommend to get a new sound card, it'll run you about $100 and you'll immediately hear the difference. I'd post a link to a forum where you can read about them, but thats forbidden.. Send me a quick mail to jeka@ jeka.org and I'll give you 2 threads with soundcard reviews.

jonesy · 11-05-2006, 09:22 PM

firewire/usb that bitch in there or do the mono out right into your soundcard and have at it.

what program are you using to record?

i better hear some heavy shit from you dean!

Linguist · 11-05-2006, 09:27 PM

Just noticed the USB slot, didn't see that before - you can just plug it directly into the computer like PodXT.

DeanCapture · 11-05-2006, 09:39 PM

Quote:

Originally Posted by Linguist

Just noticed the USB slot, didn't see that before - you can just plug it directly into the computer like PodXT.

I wondered about that. The manual says regarding the USB connector: "When the Dr-880 is connected to your computer via the USB connector, you can load SMF data and use it as rhythm patterns. The USB connector can also be used as a MIDI interfacing. I have no idea what that means

DeanCapture · 11-05-2006, 09:41 PM

Quote:

Originally Posted by jonesy

what program are you using to record?

i better hear some heavy shit from you dean!

Hey Jonesy - I'm playing around with Acid Pro 6. The latest version of Acid has multi-tracking capabilities. I haven't yet tried recording with it yet but I think it should be fine. I'm very familiar with Sony Vegas and Acid is very similar so it's a very easy learning curve for me

Linguist · 11-05-2006, 09:42 PM

Quote:

Originally Posted by DeanCapture

I wondered about that. The manual says regarding the USB connector: "When the Dr-880 is connected to your computer via the USB connector, you can load SMF data and use it as rhythm patterns. The USB connector can also be used as a MIDI interfacing. I have no idea what that means

That just means that you can make rhythmic beats on the drum machine, but use the sounds from the computer. There are many software synths that make drum sounds, so you can use their sounds instead.

DeanCapture · 11-05-2006, 09:43 PM

Quote:

Originally Posted by Linguist

I'd post a link to a forum where you can read about them, but thats forbidden.. Send me a quick mail to jeka@ jeka.org and I'll give you 2 threads with soundcard reviews.

eMail sent - thanks!

shekinah · 11-05-2006, 09:48 PM

There's a manual there, I guess so, better read it.

DeanCapture · 11-05-2006, 09:56 PM

Quote:

Originally Posted by shekinah

There's a manual there, I guess so, better read it.

I did read it - but I don't understand it because I'm not familiar with much of the terms so why don't you just

jonesy · 11-05-2006, 10:08 PM

Quote:

Originally Posted by Linguist

This may be a fairly ghetto way of doing, but try plugging the L/MONO slot in drum machine into PodXT (or base pod)

It may as well work, and you may end up with extra distortion effects on the drums to play around with hehe

If you're spending the money on gear, I'd recommend to get a new sound card, it'll run you about $100 and you'll immediately hear the difference. I'd post a link to a forum where you can read about them, but thats forbidden.. Send me a quick mail to jeka@ jeka.org and I'll give you 2 threads with soundcard reviews.

im sure you could post a link to a sound card forum - its not related to adult at all and no conflict of interest

MaddCaz · 11-05-2006, 10:20 PM

good quizzo

sniperwolf · 11-05-2006, 10:43 PM

i believe you should be installing another program to make that thing work, yah know like wincake stuff... good stuff and good luck with it.

AsianDivaGirlsWebDude · 11-05-2006, 11:29 PM

Quote:

Originally Posted by DeanCapture

I did read it (the manual) - but I don't understand it because I'm not familiar with much of the terms so why don't you just

I get a kick out of responses Dean gets to the questions he asks about porn shooting over on the music boards...

Once you figure it out, compose a song for Donny Jesus and Christ-y Moron.

ADG Webmaster

DeanCapture · 11-05-2006, 11:39 PM

11-05-2006, 08:32 PM	#1
DeanCapture Haters & Trolls SUCK! Industry Role: Join Date: Dec 2002 Location: Los Angeles, CA Posts: 9,275	Musicians - Quick Question ::: Hey guys - I bought a Roland Dr-880 Drum Machine and I can't figure out how I should hook this up to my computer for recording. Which output should I use? Here's a pic of the back of the unit. Any of you guys have this machine? This thing freaks me out 'cause it sounds soooo good __________________ Twitter: @DeanCapture Instagram: @TheDeanCapture DeanCapture "at" Gmail.com

11-05-2006, 08:53 PM	#3
TreasureBucks Confirmed User Join Date: Mar 2005 Posts: 1,971	/\ what he said. __________________ TREASUREBUCKS.COM

11-05-2006, 09:03 PM	#4
AsianDivaGirlsWebDude Purveyor, Fine Asian Porn Industry Role: Join Date: Jul 2004 Location: San Francisco Bay Area Posts: 38,323	RTFM...read the fucking manual... ADG Webmaster __________________ Asian Diva Girls - Exclusive Photos and Videos Asian Diva Girls Affiliate Program (50% ccBill Revshare)

11-05-2006, 09:08 PM	#5
Linguist Confirmed User Join Date: Apr 2004 Location: Toronto, ON Posts: 1,706	It's a drum machine, it doesn't NEED to send MIDI out. Do this: Get a cord with 1/4" males on both sides (would fit into L/MONO slot, same one as you'd use for electric guitar to amp), get a 1/4" -> 1/8" adapter (im not sure if it's 1/8", but it should be same size as the one on mp3 player headphones). Plug 1/8" into AUDIO IN slot or MICROPHONE slot in your soundcard. AUDIO IN will sound much better than MICROPHONE slot. As Airek suggested, you may want a new sound card to make full use of the beast. Lemme know if you need more help. Last edited by Linguist; 11-05-2006 at 09:10 PM..

11-05-2006, 09:22 PM	#9
jonesy Confirmed User Join Date: Jan 2003 Posts: 6,688	firewire/usb that bitch in there or do the mono out right into your soundcard and have at it. what program are you using to record? i better hear some heavy shit from you dean! __________________ . Shooting Bikini Girls Last edited by jonesy; 11-05-2006 at 09:24 PM..

11-05-2006, 08:39 PM	#2
seeric .......... Industry Role: Join Date: Aug 2004 Location: .......... Posts: 41,917	well to do it the right way you should get a sound card with a midi in and out. there are several out there for about 120 bucks. also, depends what kind of recording you want to do with it.

11-05-2006, 09:12 PM	#6
Linguist Confirmed User Join Date: Apr 2004 Location: Toronto, ON Posts: 1,706	Btw, have you plugged any other instruments into your computer before? Like an electric guitar?

11-05-2006, 09:27 PM	#10
Linguist Confirmed User Join Date: Apr 2004 Location: Toronto, ON Posts: 1,706	Just noticed the USB slot, didn't see that before - you can just plug it directly into the computer like PodXT.

11-05-2006, 09:48 PM	#15
shekinah Confirmed User Join Date: May 2006 Posts: 8,452	There's a manual there, I guess so, better read it. __________________ [Web Design \| Development \| Programming \| Content Writing ] ICQ: 238-890-469

11-05-2006, 10:20 PM	#18
MaddCaz Confirmed User Join Date: Mar 2006 Location: Illinois Posts: 9,483	good quizzo __________________ BigCocks.com - MatureWomen.com - Tranny.com - DrunkGirls.com - TeenGirls.com - MonsterCock.com and many more... Click here to see them all!

11-05-2006, 10:43 PM	#19
sniperwolf Too lazy to set a custom title Join Date: Mar 2005 Posts: 17,743	i believe you should be installing another program to make that thing work, yah know like wincake stuff... good stuff and good luck with it. __________________ ~Accepting design works~

11-05-2006, 11:39 PM	#21
DeanCapture Haters & Trolls SUCK! Industry Role: Join Date: Dec 2002 Location: Los Angeles, CA Posts: 9,275	__________________ Twitter: @DeanCapture Instagram: @TheDeanCapture DeanCapture "at" Gmail.com