Video Audio Gurus, Help Needed. - GoFuckYourself.com

Belinda · 03-04-2006, 03:07 PM

Donny and I use a VX2000. For audio we have the following:

A boom mic which attaches to this:

Azden CAM3 Mini Mic Mixer

That's a 3 channel mixer. I should be able to plug the mic I have attached to my shirt into one of those channels. But only Channel 2 on the mixer works. I can plug the boom mic into channel 2 and hear it. But plugging it into 1 or 3 does not work. I don't think anything is wrong with the mixer. Am I doing something wrong?

Donny · 03-04-2006, 03:13 PM

Basically what we want to do is attach a mic to channel one. Belinda will wear the mic when she's interviewing models. Channel two will be the boom mic. That will be extended above the model's head. But channel 2 is all that works right now and I can't figure out wtf is wrong.

DeanCapture · 03-04-2006, 03:19 PM

My buddy ExpoVids uses something like that - I'll email him this thread and see if he can help ya' out

Donny · 03-04-2006, 03:21 PM

Quote:

Originally Posted by DeanCapture

My buddy ExpoVids uses something like that - I'll email him this thread and see if he can help ya' out

Thanks Dean. I was beginning to think nobody was gonna answer my lady's question.

DeanCapture · 03-04-2006, 03:23 PM

Quote:

Originally Posted by Donny

Thanks Dean. I was beginning to think nobody was gonna answer my lady's question.

If this doesn't work, you'll have to offer up some boobie pics of Belinda - maybe that'll get some attention

Expo_Vids · 03-04-2006, 03:26 PM

I only use cams with XLR inputs so never used one of those Azden mixers.

A place to get some fast help would be DVinfo.net. They have an audio forum and lots of helpful people.

Donny · 03-04-2006, 03:27 PM

Quote:

Originally Posted by Expo_Vids

I only use cams with XLR inputs so never used one of those Azden mixers.

A place to get some fast help would be DVinfo.net. They have an audio forum and lots of helpful people.

Thanks! I'll check it out!

jonesy · 03-04-2006, 06:59 PM

http://www.azdencorp.com/shop/custom...2&cat=3&page=1

This minature 3-channel microphone mixer allows you to add and mix sound from 3 microphone sources simultaneously.

The mixer features 3 MONO 3.5mm input jacks and 1 STEREO 3.5mm output jack.

Comes with a STEREO-to-MONO output cable.

****

Donny and belinda

sounds like a jack/cable issue

maybe one of your mic cables are stereo and your pluging it into a mono channel - usually this doesnt matter but with some mixers it does.

maybe belindas adapter from her mic to the cable isnt right -

look at the boom mic jack - is it like the other jacks?

the stereo jack usually has 2 or 3 rings around it the mono has one.

jollyperv · 03-04-2006, 07:03 PM

If your mics are condenser mics, make sure they are getting some phantom power somewhere in the signal chain or they won't work at all.

DeanCapture · 03-04-2006, 07:33 PM

got some help I see

Donny · 03-04-2006, 07:38 PM

Good feedback. I'm thinking the cable issue jonesy mentioned may be the problem. I think I'll take the camera and mixer down to Radio Shack and see if we can't figure it out.

jonesy · 03-07-2006, 12:06 AM

wuz the update?

03-04-2006, 03:07 PM	#1
Belinda NubilesCash.com Manager Industry Role: Join Date: Jul 2005 Location: NorCal Posts: 4,365	Video Audio Gurus, Help Needed. Donny and I use a VX2000. For audio we have the following: A boom mic which attaches to this: Azden CAM3 Mini Mic Mixer That's a 3 channel mixer. I should be able to plug the mic I have attached to my shirt into one of those channels. But only Channel 2 on the mixer works. I can plug the boom mic into channel 2 and hear it. But plugging it into 1 or 3 does not work. I don't think anything is wrong with the mixer. Am I doing something wrong? __________________ NEW SITES FROM NUBILESCASH.COM MomLover.com, FamilySwap.xxx Skype- belindam81 Email: [email protected]

03-04-2006, 03:19 PM	#3
DeanCapture Haters & Trolls SUCK! Industry Role: Join Date: Dec 2002 Location: Los Angeles, CA Posts: 9,275	My buddy ExpoVids uses something like that - I'll email him this thread and see if he can help ya' out __________________ Twitter: @DeanCapture Instagram: @TheDeanCapture DeanCapture "at" Gmail.com

03-04-2006, 03:26 PM	#6
Expo_Vids Confirmed User Join Date: Jul 2005 Posts: 1,162	I only use cams with XLR inputs so never used one of those Azden mixers. A place to get some fast help would be DVinfo.net. They have an audio forum and lots of helpful people. __________________ Squirting pussies convert like mad!!! @ Suirting 101

03-04-2006, 06:59 PM	#8
jonesy Confirmed User Join Date: Jan 2003 Posts: 6,688	http://www.azdencorp.com/shop/custom...2&cat=3&page=1 This minature 3-channel microphone mixer allows you to add and mix sound from 3 microphone sources simultaneously. The mixer features 3 MONO 3.5mm input jacks and 1 STEREO 3.5mm output jack. Comes with a STEREO-to-MONO output cable. ** Donny and belinda sounds like a jack/cable issue maybe one of your mic cables are stereo and your pluging it into a mono channel - usually this doesnt matter but with some mixers it does. maybe belindas adapter from her mic to the cable isnt right - look at the boom mic jack - is it like the other jacks? the stereo jack usually has 2 or 3 rings around it the mono has one. __________________ . Shooting Bikini Girls**

03-04-2006, 07:33 PM	#10
DeanCapture Haters & Trolls SUCK! Industry Role: Join Date: Dec 2002 Location: Los Angeles, CA Posts: 9,275	got some help I see __________________ Twitter: @DeanCapture Instagram: @TheDeanCapture DeanCapture "at" Gmail.com

03-04-2006, 03:13 PM	#2
Donny As you wish... Industry Role: Join Date: May 2002 Posts: 13,754	Basically what we want to do is attach a mic to channel one. Belinda will wear the mic when she's interviewing models. Channel two will be the boom mic. That will be extended above the model's head. But channel 2 is all that works right now and I can't figure out wtf is wrong.

03-04-2006, 07:03 PM	#9
jollyperv Confirmed User Industry Role: Join Date: Nov 2001 Location: NYC Posts: 3,927	If your mics are condenser mics, make sure they are getting some phantom power somewhere in the signal chain or they won't work at all.

03-04-2006, 07:38 PM	#11
Donny As you wish... Industry Role: Join Date: May 2002 Posts: 13,754	Good feedback. I'm thinking the cable issue jonesy mentioned may be the problem. I think I'll take the camera and mixer down to Radio Shack and see if we can't figure it out.

03-07-2006, 12:06 AM	#12
jonesy Confirmed User Join Date: Jan 2003 Posts: 6,688	wuz the update? __________________ . Shooting Bikini Girls