D-Link DI-624 help - GoFuckYourself.com

Paparazzi · 05-27-2004, 10:44 AM

I am having problems with connecting my stationary computer (connected by cable, using windows 2000), to the internet. On my Wireless connected laptop it's working fine.
I have set it to automat receive ip, dns etc. I can access the Lan, and the routers setup page, but not internet.

Any suggestions?

Dusen · 05-27-2004, 10:47 AM

What are your ISP's settings? DHCP too? You would have set it to fake the MAC address of your old network card if this is the case mabye? Just a suggestion.

CyberTraffic · 05-27-2004, 10:51 AM

D-link's customer support really are very helpful. Look for the number on the back of the manual.

I had a problem with my router and modem compatibility and they came through, helped me get a refund when the store was being an asshole about it.

Paparazzi · 05-27-2004, 03:26 PM

I just called them. The guy told me to restart the router and if it didn't work I had to resend it and send a new one...

Still not working.

mind · 05-27-2004, 03:30 PM

Quote:

Originally posted by Dusen
What are your ISP's settings? DHCP too? You would have set it to fake the MAC address of your old network card if this is the case mabye? Just a suggestion.

Might very well be the mac address, or disabled DHCP in the router. But my guess would be the mac address. Can you ping anything from the stationary?

Paparazzi · 05-27-2004, 04:01 PM

I deleted the host name I had to the laptop by mistake before

Now I just have the one to my stationary in the dynamic DHCP client list.

I can ping from both the laptop and stationary just fine. Problem is I can only access the d-link admin page from the stationary computer now. Worked on the laptop before, but I'm not able to login now.

How do I fake the the MAC address?

I use dynamic DHCP btw

KRosh · 05-27-2004, 04:09 PM

You should only be able to access the router admin if you are plugged into it directly.

Check your settings on the desktop.

open IE go to Tools - Internet options- connections- and make sure that you specify never dial a connection....

click the Lan Settings tab and make sure "automatically detect settings is checked"

Paparazzi · 05-27-2004, 04:20 PM

Quote:

Originally posted by KRosh
You should only be able to access the router admin if you are plugged into it directly.

Check your settings on the desktop.

open IE go to Tools - Internet options- connections- and make sure that you specify never dial a connection....

click the Lan Settings tab and make sure "automatically detect settings is checked"

using these settings

lagwagon · 05-27-2004, 04:23 PM

call them bro. that is the fastest and best solution instead of asking us. go straight to the source.

AdultNex · 05-27-2004, 04:25 PM

D-link is the shittiest brand I've worked with.

I've been through 3 D-link routers... Problems on end.

Basic_man · 05-27-2004, 04:25 PM

Go ask your question at the nearest Best Buy !

Paparazzi · 05-27-2004, 04:30 PM

Quote:

Originally posted by lagwagon
call them bro. that is the fastest and best solution instead of asking us. go straight to the source.

Quote:

I just called them. The guy told me to restart the router and if it didn't work I had to resend it and send a new one... Still not working.

I still hope someone can

me as I don't have time to resend the router and wait for a new one...

KRosh · 05-27-2004, 04:36 PM

Quote:

Originally posted by Paparazzi

I still hope someone can me as I don't have time to resend the router and wait for a new one...

do me a favor ...

do this

click start - run - CMD - when you get to the DOS prompt type in

ipconfig /all and tell me what the IP addy is!

Paparazzi · 05-27-2004, 04:52 PM

Quote:

Originally posted by KRosh
do me a favor ...

do this

click start - run - CMD - when you get to the DOS prompt type in

ipconfig /all and tell me what the IP addy is!

ok
desktop: 192.168.0.100
laptop: 192.168.0.102

KRosh · 05-27-2004, 05:05 PM

Quote:

Originally posted by Paparazzi
ok
desktop: 192.168.0.100
laptop: 192.168.0.102

try

start - run - cmd - ipconfig /release
and then ipconfig /renew

KRosh · 05-27-2004, 05:07 PM

i can't see it being aything else

and you are 100% sure that you have set your settings to NEVER Dial a connection and automatically detect settings??

Paparazzi · 05-27-2004, 05:31 PM

Quote:

Originally posted by KRosh
try

start - run - cmd - ipconfig /release
and then ipconfig /renew

tried that before and also tried to reboot the cable modem. I'm 100% sure I have the settings to NEVER dial a connection and automatically detect settings.

Dusen · 06-02-2004, 11:26 AM

Did you get this working, faking MAC address is in the router config.

05-27-2004, 10:44 AM	#1
Paparazzi Confirmed User Join Date: Mar 2002 Posts: 3,488	D-Link DI-624 help I am having problems with connecting my stationary computer (connected by cable, using windows 2000), to the internet. On my Wireless connected laptop it's working fine. I have set it to automat receive ip, dns etc. I can access the Lan, and the routers setup page, but not internet. Any suggestions? __________________ Pure Level(3) Premium Bandwidth When Quality Counts

05-27-2004, 03:26 PM	#4
Paparazzi Confirmed User Join Date: Mar 2002 Posts: 3,488	I just called them. The guy told me to restart the router and if it didn't work I had to resend it and send a new one... Still not working. __________________ Pure Level(3) Premium Bandwidth When Quality Counts

05-27-2004, 04:01 PM	#6
Paparazzi Confirmed User Join Date: Mar 2002 Posts: 3,488	I deleted the host name I had to the laptop by mistake before Now I just have the one to my stationary in the dynamic DHCP client list. I can ping from both the laptop and stationary just fine. Problem is I can only access the d-link admin page from the stationary computer now. Worked on the laptop before, but I'm not able to login now. How do I fake the the MAC address? I use dynamic DHCP btw __________________ Pure Level(3) Premium Bandwidth When Quality Counts

05-27-2004, 04:09 PM	#7
KRosh So Fucking Outlawed Industry Role: Join Date: Nov 2001 Posts: 5,114	You should only be able to access the router admin if you are plugged into it directly. Check your settings on the desktop. open IE go to Tools - Internet options- connections- and make sure that you specify never dial a connection.... click the Lan Settings tab and make sure "automatically detect settings is checked" Last edited by KRosh; 05-27-2004 at 04:11 PM..

05-27-2004, 04:23 PM	#9
lagwagon Confirmed User Join Date: Jul 2001 Location: az Posts: 8,464	call them bro. that is the fastest and best solution instead of asking us. go straight to the source. __________________ FTVGirls - FTVMilfs - DanielleFTV

05-27-2004, 10:47 AM	#2
Dusen Confirmed User Join Date: Aug 2002 Location: East Coast. Posts: 2,251	What are your ISP's settings? DHCP too? You would have set it to fake the MAC address of your old network card if this is the case mabye? Just a suggestion.

05-27-2004, 10:51 AM	#3
CyberTraffic Confirmed User Join Date: Feb 2004 Location: Traffic Land ~ ICQ:213666533 Posts: 2,187	D-link's customer support really are very helpful. Look for the number on the back of the manual. I had a problem with my router and modem compatibility and they came through, helped me get a refund when the store was being an asshole about it.

05-27-2004, 04:25 PM	#10
AdultNex Confirmed User Join Date: Feb 2003 Location: Bostonnnn Posts: 8,985	D-link is the shittiest brand I've worked with. I've been through 3 D-link routers... Problems on end.

05-27-2004, 04:25 PM	#11
Basic_man Programming King Pin Industry Role: Join Date: Oct 2003 Location: Montreal Posts: 27,360	Go ask your question at the nearest Best Buy ! __________________ UUGallery Builder - automated photo/video gallery plugin for Wordpress! Stop looking! Checkout Naked Hosting, online since 1999 !

05-27-2004, 05:07 PM	#16
KRosh So Fucking Outlawed Industry Role: Join Date: Nov 2001 Posts: 5,114	i can't see it being aything else and you are 100% sure that you have set your settings to NEVER Dial a connection and automatically detect settings??

06-02-2004, 11:26 AM	#18
Dusen Confirmed User Join Date: Aug 2002 Location: East Coast. Posts: 2,251	Did you get this working, faking MAC address is in the router config.