Linksys - Wtf $%@ - GoFuckYourself.com

xxweekxx · 06-03-2003, 07:33 PM

Today my internet was slow as a fucker, So i logged into admin area of linksys wireless router and I checked out dhcp table and some fucker michael was connected to my computer... Its probably someone that lives next door or something.. How do i block off other people from connecting to my router( I have 3 pcs connected to it so far)

There is a password feature or something? or am i wrong?

Also on zone alarm, im getting 3 alerts like this every second-

The firewall has blocked Internet access to your computer (UDP Port 41170) from xxx.xx.xxx.xx (UDP Port 1100).

Time: 6/3/2003 10:34:38 PM

Any ideas?

galleryseek · 06-03-2003, 07:35 PM

take a stroll over to his room with a sledge hammer

uno · 06-03-2003, 07:38 PM

You are saying someone jacked into your router?
I believe there is an option to encrypt your signal.

xxweekxx · 06-03-2003, 07:39 PM

its a wireless router. And yes how do i encrypt the signal

alm4n · 06-03-2003, 07:40 PM

hahaha im using your internet

p00p · 06-03-2003, 07:40 PM

Hmmm...and I was going to go wireless so I can work around the house and outside.....Maybe just not yet.

crockett · 06-03-2003, 07:41 PM

by setting up you're encryption

read the instructions because every router is diffrent but it's pretty simple to do

xxweekxx · 06-03-2003, 07:42 PM

its not in the manual and linksys support sucks kangaroo balls

uno · 06-03-2003, 07:45 PM

Quote:

Originally posted by crockett
by setting up you're encryption read the instructions because every router is diffrent but it's pretty simple to do

I'm pretty sure crockett is right. Also, there may be an option to limit the # of computers that can connect to the router. Does it give you an option to drop him?

uno · 06-03-2003, 07:49 PM

Number of DHCP users Enter the maximum number of PCs that will
require IP addresses assigned by the Router. No more than 253 computers
can be used. In order to determine the DHCP IP Address range, add the
starting IP address (e.g., 100) to the number of DHCP users. By default, as
shown in Figure 5-9, if you add 50 users, the range or IP Addresses will be
192.168.1.100 to 192.168.1.149.
address(es) of the DNS currently used by the Router. Multiple DNS IP settings
are common. In most cases, the first available DNS entry is used.

xxweekxx · 06-03-2003, 07:51 PM

Quote:

Originally posted by uno
Number of DHCP users Enter the maximum number of PCs that will
require IP addresses assigned by the Router. No more than 253 computers
can be used. In order to determine the DHCP IP Address range, add the
starting IP address (e.g., 100) to the number of DHCP users. By default, as
shown in Figure 5-9, if you add 50 users, the range or IP Addresses will be
192.168.1.100 to 192.168.1.149.
address(es) of the DNS currently used by the Router. Multiple DNS IP settings
are common. In most cases, the first available DNS entry is used.

YEah. thanks. set the max to 3 and now i see only my computers and my internet is fast as usual..
But something has to be done about "Michael"

crockett · 06-03-2003, 07:51 PM

then go into you're router and look for securty features... it's got to be in there.. I've never set it up on a linsky but all wireless routers have this... I think the 54g series may use something else.. but should be close... anyway there should be an option under securty to set up you're encryption tipically when you have 1 computer on the router using wireless it's turned on by defult..but sometimes with more than 1 PC it will get turned off.

russian_agent_69 · 06-03-2003, 07:54 PM

Aside from enabling WEP, use a MAC address policy to restrict the adapters that can use your device.

uno · 06-03-2003, 07:59 PM

Quote:

Originally posted by xxweekxx

YEah. thanks. set the max to 3 and now i see only my computers and my internet is fast as usual..
But something has to be done about "Michael"

Would it be possible to put live bait fish in his mailbox?

06-03-2003, 07:33 PM	#1
xxweekxx Confirmed User Join Date: Oct 2002 Posts: 6,780	Linksys - Wtf $%@ Today my internet was slow as a fucker, So i logged into admin area of linksys wireless router and I checked out dhcp table and some fucker michael was connected to my computer... Its probably someone that lives next door or something.. How do i block off other people from connecting to my router( I have 3 pcs connected to it so far) There is a password feature or something? or am i wrong? Also on zone alarm, im getting 3 alerts like this every second- The firewall has blocked Internet access to your computer (UDP Port 41170) from xxx.xx.xxx.xx (UDP Port 1100). Time: 6/3/2003 10:34:38 PM Any ideas?

06-03-2003, 07:38 PM	#3
uno RIP Dodger. BEST.CAT.EVER Industry Role: Join Date: Dec 2002 Location: NYC Area Posts: 18,450	You are saying someone jacked into your router? I believe there is an option to encrypt your signal. __________________ -uno icq: 111-914 CrazyBabe.com - porn art MojoHost - For all your hosting needs, present and future. Tell them I sent ya!

06-03-2003, 07:40 PM	#6
p00p Confirmed User Join Date: Dec 2002 Location: CanaDUH Posts: 5,125	Hmmm...and I was going to go wireless so I can work around the house and outside.....Maybe just not yet. __________________ ICQ: 316365783 <a href="http://www.hostultra.com/~p00p" target="_blank">TEST</a>

06-03-2003, 07:41 PM	#7
crockett in a van by the river Industry Role: Join Date: May 2003 Posts: 76,806	by setting up you're encryption read the instructions because every router is diffrent but it's pretty simple to do __________________ In November, you can vote for America's next president or its first dictator.

06-03-2003, 07:49 PM	#10
uno RIP Dodger. BEST.CAT.EVER Industry Role: Join Date: Dec 2002 Location: NYC Area Posts: 18,450	Number of DHCP users Enter the maximum number of PCs that will require IP addresses assigned by the Router. No more than 253 computers can be used. In order to determine the DHCP IP Address range, add the starting IP address (e.g., 100) to the number of DHCP users. By default, as shown in Figure 5-9, if you add 50 users, the range or IP Addresses will be 192.168.1.100 to 192.168.1.149. address(es) of the DNS currently used by the Router. Multiple DNS IP settings are common. In most cases, the first available DNS entry is used. __________________ -uno icq: 111-914 CrazyBabe.com - porn art MojoHost - For all your hosting needs, present and future. Tell them I sent ya!

06-03-2003, 07:35 PM	#2
galleryseek Confirmed User Industry Role: Join Date: Mar 2002 Posts: 8,234	take a stroll over to his room with a sledge hammer

06-03-2003, 07:39 PM	#4
xxweekxx Confirmed User Join Date: Oct 2002 Posts: 6,780	its a wireless router. And yes how do i encrypt the signal

06-03-2003, 07:40 PM	#5
alm4n Confirmed User Join Date: Apr 2003 Location: toronto Posts: 629	hahaha im using your internet

06-03-2003, 07:42 PM	#8
xxweekxx Confirmed User Join Date: Oct 2002 Posts: 6,780	its not in the manual and linksys support sucks kangaroo balls

06-03-2003, 07:51 PM	#12
crockett in a van by the river Industry Role: Join Date: May 2003 Posts: 76,806	then go into you're router and look for securty features... it's got to be in there.. I've never set it up on a linsky but all wireless routers have this... I think the 54g series may use something else.. but should be close... anyway there should be an option under securty to set up you're encryption tipically when you have 1 computer on the router using wireless it's turned on by defult..but sometimes with more than 1 PC it will get turned off. __________________ In November, you can vote for America's next president or its first dictator.

06-03-2003, 07:54 PM	#13
russian_agent_69 So Fucking Banned Join Date: Oct 2002 Posts: 247	Aside from enabling WEP, use a MAC address policy to restrict the adapters that can use your device.