Need help with installing a DVD-ROM... - GoFuckYourself.com

psyko514 · 05-23-2003, 09:25 PM

I've got a 40 GB HD as my master and a 10 GB HD as a slave.
I also have a CD-RW setup. I wanna get the DVD-ROM in there too.
Right now, when I wanna use the DVD, I gotta shut down, unhook the CD-RW, hook up the DVD and restart... Major pain in the ass...

Any advice?

p00p · 05-23-2003, 09:30 PM

CD-RW as primary master
c: as primary Slave
DVD as secondary master
any other hard drive as secondary slave?

Jay_StandAhead · 05-23-2003, 09:30 PM

Why don't you put the DVD on the same cable as the CDRW

Jay_StandAhead · 05-23-2003, 09:31 PM

Quote:

Originally posted by p00p
CD-RW as primary master
c: as primary Slave
DVD as secondary master
any other hard drive as secondary slave?

I'd put the HD with the OS as the primary master!

psyko514 · 05-23-2003, 09:31 PM

Quote:

Originally posted by Jay[neX]
Why don't you put the DVD on the same cable as the CDRW

I tried that and it didn't seem to work.

Jay_StandAhead · 05-23-2003, 09:32 PM

jumpers..

post a pic of the back of you CDRW and your DVD
and tell me what brand they are

Luc Duboi · 05-23-2003, 09:35 PM

whatever you do. put the CD-R next to the C .

p00p · 05-23-2003, 09:37 PM

Quote:

Originally posted by Jay[neX]

I'd put the HD with the OS as the primary master!

I have been using the cd as master for years, and HD with OS as slave....works all the time, no probs. Just built 3 comps this week with CD-RW as primary master, and OS drives as primary slave and all three setup without a hitch. No hardward/software issues at all. *shrug*

p00p · 05-23-2003, 09:38 PM

Quote:

Originally posted by Jay[neX]
jumpers..

post a pic of the back of you CDRW and your DVD
and tell me what brand they are

Or, set jumpers on all drives to Cable Select and let the cables and bios do the figuring out....

Jay_StandAhead · 05-23-2003, 09:39 PM

Quote:

Originally posted by p00p

Or, set jumpers on all drives to Cable Select and let the cables and bios do the figuring out....

exactly why i wanna see the jumpers. Unless it's well indicated where to put the jumpers for what setup. Sometimes you have to figure it out.

psyko514 · 05-23-2003, 09:41 PM

Quote:

Originally posted by Jay[neX]

exactly why i wanna see the jumpers. Unless it's well indicated where to put the jumpers for what setup. Sometimes you have to figure it out.

i'm too lazy to pull out the camera, pull my desk away from the wall, resize and upload the photos, etc...

but i appreciate the help and advice so far

i'll take a look at it tomorrow and try again. it's something i haven't bothered with in months, but TDF's HD problem thread reminded me

Jay_StandAhead · 05-23-2003, 09:43 PM

hehe i guess you could always get a DVD burner and get rid of that CDRW

psyko514 · 05-23-2003, 09:43 PM

Quote:

Originally posted by Jay[neX]
hehe i guess you could always get a DVD burner and get rid of that CDRW

it's on the list

Jay_StandAhead · 05-23-2003, 09:45 PM

Quote:

Originally posted by psyko514

it's on the list

I'll buy it for you with your neXbucks!

psyko514 · 05-23-2003, 09:49 PM

Quote:

Originally posted by Jay[neX]

I'll buy it for you with your neXbucks!

so you're gonna give me some neXbucks and then buy me a dvd burner?

you rock!

Jay_StandAhead · 05-23-2003, 09:51 PM

Quote:

Originally posted by psyko514

so you're gonna give me some neXbucks and then buy me a dvd burner?

you rock!

Sure! I'll give you 1 neXbuck per signup (on top of your regular payout)

hehe and I'll order the DVD burner from Micro-Extreme in Montreal (if they still exist) so it'll be dirt cheap.

p00p · 05-23-2003, 09:54 PM

Quote:

Originally posted by Jay[neX]

exactly why i wanna see the jumpers. Unless it's well indicated where to put the jumpers for what setup. Sometimes you have to figure it out.

The computer I am on now has 3 hard drives, and a CD burner in it. I can set all the jumpers to cable select, hook up the primary and secondary cables in the proper order, and it will all work fine. And it is a windows 2k server box. No conflicts at all.....whether it is a burner, DVD player, hard drive, card reader etc. etc....

Jay_StandAhead · 05-23-2003, 09:57 PM

Quote:

Originally posted by p00p

The computer I am on now has 3 hard drives, and a CD burner in it. I can set all the jumpers to cable select, hook up the primary and secondary cables in the proper order, and it will all work fine. And it is a windows 2k server box. No conflicts at all.....whether it is a burner, DVD player, hard drive, card reader etc. etc....

What I meant is that some drives don't have a little graphic saying where to put the jumpers for master or slave or cable select. They just throw a jumper in the Masters (at least it was like that with old maxtors).

p00p · 05-23-2003, 10:04 PM

Quote:

Originally posted by Jay[neX]

What I meant is that some drives don't have a little graphic saying where to put the jumpers for master or slave or cable select. They just throw a jumper in the Masters (at least it was like that with old maxtors).

That's odd. I just looked at an old WD Caviar 1.2 gig drive I have that is probably 5+ years old and it even has a setting for cable select, and it isn't hard to find where to put the jumper, it is stamped on the board.
I have never installed a DVD drive, so it may be different, but I messed with 2 LG cd writers this week and a Creative Labs CD drive and they all had master/slave/cable select jumper settings plain as day. I would think any DVD player/writer would have it written on the housing somewhere, or at least in the manual.

Jay_StandAhead · 05-23-2003, 10:07 PM

Quote:

Originally posted by p00p

That's odd. I just looked at an old WD Caviar 1.2 gig drive I have that is probably 5+ years old and it even has a setting for cable select, and it isn't hard to find where to put the jumper, it is stamped on the board.
I have never installed a DVD drive, so it may be different, but I messed with 2 LG cd writers this week and a Creative Labs CD drive and they all had master/slave/cable select jumper settings plain as day. I would think any DVD player/writer would have it written on the housing somewhere, or at least in the manual.

oh it's definitly in the manual... but who keeps those? The only drives that didn't have it indicated on the drives were old maxtor... that's why i memorised the master an slave position

::|: <--- Slave
|-:: <----Master

p00p · 05-23-2003, 10:11 PM

Quote:

Originally posted by Jay[neX]

oh it's definitly in the manual... but who keeps those? The only drives that didn't have it indicated on the drives were old maxtor... that's why i memorised the master an slave position

::|: <--- Slave
|-:: <----Master

Isn't there a legend on the decal pasted on the housing? I have 4 maxtors here, and 3 Quantums and the jumper settings are all the same, and my oldest quantum is about 3 years old. How old are the drives you are using? My oldest quantum has the jumper settings on the drive. Any maxtor I have owned has the same jumper settins as Quantum, even before Maxtor took over Quantum.

Jay_StandAhead · 05-23-2003, 10:16 PM

Quote:

Originally posted by p00p

Isn't there a legend on the decal pasted on the housing? I have 4 maxtors here, and 3 Quantums and the jumper settings are all the same, and my oldest quantum is about 3 years old. How old are the drives you are using? My oldest quantum has the jumper settings on the drive. Any maxtor I have owned has the same jumper settins as Quantum, even before Maxtor took over Quantum.

no legends... it's an old 6.4 gigs... the first model. If I still had it I'd post a pic

p00p · 05-23-2003, 10:24 PM

Quote:

Originally posted by Jay[neX]

no legends... it's an old 6.4 gigs... the first model. If I still had it I'd post a pic

I should post a pic of this 1.2 gig WD Caviar I have. Most reliable drive I ever owned...RIP. It is too small to use anymore. It was one of the first 'large' drives I ever bought, used, from some guy out of the Bargain Finder in Edmonton many many years ago. The thing still ran perfect with no bad sectors up until a week ago when I rebuilt the comp it was in.

Jay_StandAhead · 05-23-2003, 10:27 PM

Quote:

Originally posted by p00p

I should post a pic of this 1.2 gig WD Caviar I have. Most reliable drive I ever owned...RIP. It is too small to use anymore. It was one of the first 'large' drives I ever bought, used, from some guy out of the Bargain Finder in Edmonton many many years ago. The thing still ran perfect with no bad sectors up until a week ago when I rebuilt the comp it was in.

Those big drives along with a pentium 60mhz were the shit

asuna · 05-23-2003, 10:29 PM

did you fix your prob?

Olivier · 05-23-2003, 11:24 PM

micro extreme is dead

go to Services-Info, in Longueuil, 1103 Chemin Chambly.

http://www.services-info.com

Ask for Mario, and tell him Olivier from Angel Eye Studios Inc. send ya!

05-23-2003, 09:25 PM	#1
psyko514 See sig. Join Epic Cash. Join Date: Oct 2002 Location: Montreal, Quebec. ICQ: 214702014 Posts: 22,366	Need help with installing a DVD-ROM... I've got a 40 GB HD as my master and a 10 GB HD as a slave. I also have a CD-RW setup. I wanna get the DVD-ROM in there too. Right now, when I wanna use the DVD, I gotta shut down, unhook the CD-RW, hook up the DVD and restart... Major pain in the ass... Any advice? __________________ Bad Girl Bucks - 50% Revshare through CCBill. Promote BrandyDDD, Pixie's Pillows, Action Allie and more! Phoenix Forum Pics \| Webmaster Access Montreal pics email: psyko514(a)gmail.com \| icq: 214-702-014

05-23-2003, 09:30 PM	#2
p00p Confirmed User Join Date: Dec 2002 Location: CanaDUH Posts: 5,125	CD-RW as primary master c: as primary Slave DVD as secondary master any other hard drive as secondary slave? __________________ ICQ: 316365783 <a href="http://www.hostultra.com/~p00p" target="_blank">TEST</a>

05-23-2003, 09:30 PM	#3
Jay_StandAhead Confirmed User Industry Role: Join Date: Jul 2002 Posts: 3,103	Why don't you put the DVD on the same cable as the CDRW __________________ Our Programs: StandAhead \| IndieBucks \| BoyCrushCash \| Phoenixxx \| EmoProfits \| BritishBucks \| HunkMoney \| LatinoBucks Make $$$ with Gay! Lowest Minimum Payouts in the Business, Perfect Track Record, Amazing Sites

05-23-2003, 09:32 PM	#6
Jay_StandAhead Confirmed User Industry Role: Join Date: Jul 2002 Posts: 3,103	jumpers.. post a pic of the back of you CDRW and your DVD and tell me what brand they are __________________ Our Programs: StandAhead \| IndieBucks \| BoyCrushCash \| Phoenixxx \| EmoProfits \| BritishBucks \| HunkMoney \| LatinoBucks Make $$$ with Gay! Lowest Minimum Payouts in the Business, Perfect Track Record, Amazing Sites

05-23-2003, 09:43 PM	#12
Jay_StandAhead Confirmed User Industry Role: Join Date: Jul 2002 Posts: 3,103	hehe i guess you could always get a DVD burner and get rid of that CDRW __________________ Our Programs: StandAhead \| IndieBucks \| BoyCrushCash \| Phoenixxx \| EmoProfits \| BritishBucks \| HunkMoney \| LatinoBucks Make $$$ with Gay! Lowest Minimum Payouts in the Business, Perfect Track Record, Amazing Sites

05-23-2003, 09:35 PM	#7
Luc Duboi So Fucking Banned Join Date: Mar 2003 Posts: 1,881	whatever you do. put the CD-R next to the C .

05-23-2003, 10:29 PM	#25
asuna Confirmed User Join Date: May 2002 Location: Montreal Posts: 8,743	did you fix your prob? __________________

05-23-2003, 11:24 PM	#26
Olivier Confirmed User Industry Role: Join Date: Mar 2003 Location: Montreal, Canada Posts: 656	micro extreme is dead go to Services-Info, in Longueuil, 1103 Chemin Chambly. http://www.services-info.com Ask for Mario, and tell him Olivier from Angel Eye Studios Inc. send ya!