Microphone recommenddations for FX1? - GoFuckYourself.com

mkx · 05-15-2007, 01:23 AM

Just picked up an HDR-FX1, what is a good shotgun or other microphone for it in the $100-$200 range or am I better off using the FX1 mic than what I can get in that budget range?

NoWhErE · 05-15-2007, 01:45 AM

dont use the internal mic, its absolute pure shit.

I can't remember if the FX1 ships with a detachable mic, but if it does, thats ok for sound.

The question is : What are you going to be doing with your cam?

If its gonzo type shooting with no voice coming from behind the camera, get yourself a hyper cardoid boom mic and attach it to the front. Or splurge on a Boom pole and have someone get sound from above for you.

If you're going to be hearing voices from everywhere, just keep the el-cheapo omni directional Rhode mic they supplied you.

But don't use the internal mic unless you like your stuff sounding like it was recorded inside a tin can.

mkx · 05-27-2007, 03:07 AM

I need something that will pic up both my voice (while holding the camera) and the models voice. There will be a lot of talking. Looking to spend $200-$500

mkx · 05-27-2007, 03:13 AM

I am considering this one http://cgi.ebay.com/RODE-VIDEOMIC-sh...QQcmdZViewItem

BobG · 05-27-2007, 03:46 AM

Quote:

Originally Posted by NoWhErE

dont use the internal mic, its absolute pure shit.

I can't remember if the FX1 ships with a detachable mic, but if it does, thats ok for sound.

The question is : What are you going to be doing with your cam?

If its gonzo type shooting with no voice coming from behind the camera, get yourself a hyper cardoid boom mic and attach it to the front. Or splurge on a Boom pole and have someone get sound from above for you.

If you're going to be hearing voices from everywhere, just keep the el-cheapo omni directional Rhode mic they supplied you.

But don't use the internal mic unless you like your stuff sounding like it was recorded inside a tin can.

For sure. Absolutely do not use the internal mic. Every time you adjust your grip on the camera, you're going to get alot of snap crackle pop from the cheap ass plastic body giving way. Sounds like crap. you'll hate it.

One decent solution is this is the little Sony ECM-MSD1 High Grade Stereo Microphone from sony. It definitely cleans up all that snap crackle pop but you still have to be a bit gentle with the cam. It's directional but keep it on 120degrees or it will cut off when you shoot at angles. It's only $100 but it's quite an improvement from the internal one. Also, I highly recommend an on camera light source too. I've used the Sony HVL-20DMA 10 Watt & 20 Watt Dual Video Light and it makes a huge difference. Comes with a bracket so you can use it together with the mic but I just mount it to the shoe and wedge the mic with the wind gaurd on between the wide angle lens and the bottom of the shitty internal mic.

Sony Accessories

mkx · 05-28-2007, 02:27 AM

I doubt a $100 camera will do the trick. Still looking for recommendations

Lykos · 05-28-2007, 03:05 AM

I use FX1 last 2 years,u absolutely don't need internal mic,not at all,it will pick up both voices more then good

Jim_Gunn · 05-28-2007, 07:46 AM

The FX-1 internal mic is crappy, unlike the stock stereo mic on the Sony VX2100, which is actually pretty decent. There are much better external mics out there now, but for a budget-priced external mic, you can try a Sennheiser MKE 300. It's mono, like many external mics, so you will have to to fill the other audio channel in post to create a pseudo-stereo effect. And it is very directional, so if you intend to speak from behind the camera you have to speak loudly to compensate for that.

rock-reed · 07-17-2007, 06:09 PM

Sennheiser MKE300

best MIC for the FX1 for the price.

ExtremeBank_Adam · 07-17-2007, 07:17 PM

Yep, the OEM mic is total crap. I have the Azden SMX-10 with a custom mount (just like the Z1). This frees up my shoe for my light... otherwise you have to choose if you want to use your light or your mic.

Here are some pics:

Jim_Gunn · 07-17-2007, 07:24 PM

Quote:

Originally Posted by ExtremeBank_Adam

Yep, the OEM mic is total crap. I have the Azden SMX-10 with a custom mount (just like the Z1). This frees up my shoe for my light... otherwise you have to

This is an old thread. I was about to re-type what I had already written. Anyway, that's a nice setup, Adam. Did you buy the mount separately and attach it yourself?

05-15-2007, 01:23 AM	#1
mkx Confirmed User Industry Role: Join Date: Nov 2003 Location: Toronto Posts: 4,001	Microphone recommenddations for FX1? Just picked up an HDR-FX1, what is a good shotgun or other microphone for it in the $100-$200 range or am I better off using the FX1 mic than what I can get in that budget range?

05-15-2007, 01:45 AM	#2
NoWhErE Too lazy to set a custom title Industry Role: Join Date: Sep 2005 Location: Canada Posts: 10,389	dont use the internal mic, its absolute pure shit. I can't remember if the FX1 ships with a detachable mic, but if it does, thats ok for sound. The question is : What are you going to be doing with your cam? If its gonzo type shooting with no voice coming from behind the camera, get yourself a hyper cardoid boom mic and attach it to the front. Or splurge on a Boom pole and have someone get sound from above for you. If you're going to be hearing voices from everywhere, just keep the el-cheapo omni directional Rhode mic they supplied you. But don't use the internal mic unless you like your stuff sounding like it was recorded inside a tin can. __________________ skype: lordofthecameltoe

05-28-2007, 03:05 AM	#7
Lykos Too lazy to set a custom title Industry Role: Join Date: Apr 2003 Location: World Posts: 31,027	I use FX1 last 2 years,u absolutely don't need internal mic,not at all,it will pick up both voices more then good __________________

07-17-2007, 06:09 PM	#9
rock-reed Confirmed User Join Date: May 2005 Posts: 1,892	Sennheiser MKE300 best MIC for the FX1 for the price. __________________ --- Ethnic niche? Black-Asian-Latina ? Contact me and lets talk traffic. rockreed@ that thing they call the google mail When you E-mail Me, PLZZZZ make the Subject Title: >>>>>> GFY! So I do not lose you in Spam.

07-17-2007, 07:17 PM	#10
ExtremeBank_Adam Confirmed User Industry Role: Join Date: Dec 2005 Location: Tampa, FL Posts: 1,671	Yep, the OEM mic is total crap. I have the Azden SMX-10 with a custom mount (just like the Z1). This frees up my shoe for my light... otherwise you have to choose if you want to use your light or your mic. Here are some pics: __________________ ExtremeBank.com, the EXTREME program for the Pornicate.com Network of sites: Naughty Alysha, Roxy Raye, Buddha Bang, Angie Noir, Fisting Sex, Extreme Ty & many more. Email: adam [at] extremebank.com \| ICQ: 331-797-412

05-27-2007, 03:07 AM	#3
mkx Confirmed User Industry Role: Join Date: Nov 2003 Location: Toronto Posts: 4,001	I need something that will pic up both my voice (while holding the camera) and the models voice. There will be a lot of talking. Looking to spend $200-$500

05-27-2007, 03:13 AM	#4
mkx Confirmed User Industry Role: Join Date: Nov 2003 Location: Toronto Posts: 4,001	I am considering this one http://cgi.ebay.com/RODE-VIDEOMIC-sh...QQcmdZViewItem

05-28-2007, 02:27 AM	#6
mkx Confirmed User Industry Role: Join Date: Nov 2003 Location: Toronto Posts: 4,001	I doubt a $100 camera will do the trick. Still looking for recommendations

05-28-2007, 07:46 AM	#8
Jim_Gunn Confirmed User Industry Role: Join Date: Feb 2003 Location: Where The Teens Are Posts: 5,702	The FX-1 internal mic is crappy, unlike the stock stereo mic on the Sony VX2100, which is actually pretty decent. There are much better external mics out there now, but for a budget-priced external mic, you can try a Sennheiser MKE 300. It's mono, like many external mics, so you will have to to fill the other audio channel in post to create a pseudo-stereo effect. And it is very directional, so if you intend to speak from behind the camera you have to speak loudly to compensate for that.