any djs on the board? technical question - GoFuckYourself.com

ytcracker · 12-21-2003, 11:55 AM

i have brand new m3ds and ortofon dc carts

carts needles should be good grounds are sound all that shit but one of my tables is missing all of the high

dont think its the mixer because when i plug the table into a different channel it sounds whack still

ive changed the needles out with new ones swapper carts on the tables i dunno

anyone ran into similar problems or know what it is

InsaneGreen · 12-21-2003, 12:22 PM

try switching the "phono/line" switch on the back of the deck.

ytcracker · 12-21-2003, 12:24 PM

nah its not that either

i have a djm600 and there are separate ins for ph/ine anyway

im just gonna buy some new carts fuck it

InsaneGreen · 12-21-2003, 12:27 PM

you should buy the stanton groovemasters. thats what i have. theyre awsome. real clean crisp sound.

ytcracker · 12-21-2003, 12:28 PM

Quote:

Originally posted by InsaneGreen
you should buy the stanton groovemasters. thats what i have. theyre awsome. real clean crisp sound.

will do

im saying fuck ortofon for now

thanks for the tip

those are the silver ones right?

Arousal Design · 12-21-2003, 12:29 PM

did you try licking the end of the needle connectors?

ytcracker · 12-21-2003, 12:30 PM

Quote:

Originally posted by Arousal Design
did you try licking the end of the needle connectors?

yea thats my ?

i do that shit all the time

InsaneGreen · 12-21-2003, 12:30 PM

Quote:

Originally posted by ytcracker

will do

im saying fuck ortofon for now

thanks for the tip

those are the silver ones right?

yeah they are silver

LadyMischief · 12-21-2003, 12:32 PM

I think Grim Shawn is the man to ask

ytcracker · 12-21-2003, 12:34 PM

Quote:

Originally posted by LadyMischief
I think Grim Shawn is the man to ask

yea i talk to him on icq we are like two peas in a pod with our taste of music

fuck it though i think im just gonna buy myself new carts this christmas

www.pssl.com the pimp palace of gear

InsaneGreen · 12-21-2003, 12:51 PM

what do you spin?

ytcracker · 12-21-2003, 12:53 PM

Quote:

Originally posted by InsaneGreen
what do you spin?

little bit of everything - primarily breaks and dnb now.

started out hard house/hard trance migrated to funky house i dunno im all over the board.

ill be spinning at the reflected.net booth in vegas, i think im still on to open the topbucks party.

InsaneGreen · 12-21-2003, 12:54 PM

Quote:

Originally posted by ytcracker

little bit of everything - primarily breaks and dnb now.

started out hard house/hard trance migrated to funky house i dunno im all over the board.

ill be spinning at the reflected.net booth in vegas, i think im still on to open the topbucks party.

nice..
im pretty much oppsite of that. i started spinning breaks and mellow trance, now i spin hardhouse and hardtrance... you should get me a spot at that party

ytcracker · 12-21-2003, 12:57 PM

Quote:

Originally posted by InsaneGreen
nice..
im pretty much oppsite of that. i started spinning breaks and mellow trance, now i spin hardhouse and hardtrance... you should get me a spot at that party

i had to pull teeth to get in through lisar

i dont have much of a famous reputation - ive done parties in chicago, iowa, and here(my company owns coloradoraves.com) but havent headline anything serious.

grimshawn, however, has played alongside all the ECB heavy hitters in florida.

com · 12-21-2003, 12:59 PM

good taste in decks... i would change cartriges and get your hands on a hak 360 ;)

InsaneGreen · 12-21-2003, 01:00 PM

what name do you and grimshawn spin as?

ytcracker · 12-21-2003, 01:01 PM

Quote:

Originally posted by com
good taste in decks... i would change cartriges and get your hands on a hak 360 ;)

i straight gave my mk2s to my buddy seans brother when seany passed away (rip)

haks are more hiphop oriented mixers - the djm is pretty versatile but more down with the dance music shit.

i got a lot of stupid ass studio equipment im a music nerd

ytcracker · 12-21-2003, 01:03 PM

Quote:

Originally posted by InsaneGreen
what name do you and grimshawn spin as?

ive been ytcracker through thick and thin

i have no idea what shawn goes/went by

i represent dge, coraves and www.coloradobeach.com baby

dirtysouth · 12-21-2003, 02:24 PM

Licking the ends is bad. Corrosion. Went through the whole shit with a Technics tech in ATL last year after I went to Ortofon. Thought it was my Pro-55. The shaft in the Ortofon is much shorter than the factory Technics.

Xplicit · 12-21-2003, 02:30 PM

ortofon is better than stanton trackmasters.... that shouldnt be the problem.

Maybe you just got a bad needle, exchange it.

Don't switch to stanton.

dnsmonster · 12-21-2003, 02:39 PM

I vouch for Stanton Groovemasters as well.

Deep House, Psy Trance, Psy Hardcore here.

South Florida peeps need to check me out at Lumonics in Ft. Lauderdale on February 23rd. I am bringing out all my toys: FS, AirFX and maybe even the 303. Those who heard me know my sets are off the hook. Well, this one is bound the be the best eva!

johnbosh · 12-21-2003, 02:40 PM

sweeet

GrimShawn · 12-21-2003, 03:00 PM

damn lots of dj's in here! hit me up on icq! 139682480

I spin dNb mostly, but will bust the hip hop out as well.

Also got a killa house selection. Was nice growing up in the late 80's early 90's in chicago!

12-21-2003, 11:55 AM	#1
ytcracker stc is the greatest Join Date: Dec 2002 Location: rip sean murray Posts: 12,403	any djs on the board? technical question i have brand new m3ds and ortofon dc carts carts needles should be good grounds are sound all that shit but one of my tables is missing all of the high dont think its the mixer because when i plug the table into a different channel it sounds whack still ive changed the needles out with new ones swapper carts on the tables i dunno anyone ran into similar problems or know what it is __________________ www.ytcracker.com \| www.digitalgangster.com i love you

12-21-2003, 12:24 PM	#3
ytcracker stc is the greatest Join Date: Dec 2002 Location: rip sean murray Posts: 12,403	nah its not that either i have a djm600 and there are separate ins for ph/ine anyway im just gonna buy some new carts fuck it __________________ www.ytcracker.com \| www.digitalgangster.com i love you

12-21-2003, 12:29 PM	#6
Arousal Design Confirmed User Join Date: Jun 2002 Location: Connecticut. Posts: 1,358	did you try licking the end of the needle connectors? __________________ Make Major Bank With Major Personality - NaughtyBank! Featuring NaughtyAllie and NaughtyJulie!

12-21-2003, 12:32 PM	#9
LadyMischief Orgasms N Such! Industry Role: Join Date: Sep 2002 Location: Oakville, Ontario Posts: 18,135	I think Grim Shawn is the man to ask __________________ ICQ 3522039 Content Manager - orgasm.com [email protected]

12-21-2003, 12:59 PM	#15
com Confirmed User Join Date: Aug 2003 Location: Portland, Oregon Posts: 4,541	good taste in decks... i would change cartriges and get your hands on a hak 360 ;) __________________ Real. Professional. Hosting. .:Expect Nothing Less:. 320-078-843 :: www.realprohosting.com :: [email protected]

12-21-2003, 12:22 PM	#2
InsaneGreen Confirmed User Join Date: Aug 2003 Location: southern california Posts: 996	try switching the "phono/line" switch on the back of the deck.

12-21-2003, 12:27 PM	#4
InsaneGreen Confirmed User Join Date: Aug 2003 Location: southern california Posts: 996	you should buy the stanton groovemasters. thats what i have. theyre awsome. real clean crisp sound.

12-21-2003, 12:51 PM	#11
InsaneGreen Confirmed User Join Date: Aug 2003 Location: southern california Posts: 996	what do you spin?

12-21-2003, 01:00 PM	#16
InsaneGreen Confirmed User Join Date: Aug 2003 Location: southern california Posts: 996	what name do you and grimshawn spin as?

12-21-2003, 02:24 PM	#19
dirtysouth Confirmed User Join Date: Jul 2003 Location: Mobtown Posts: 2,613	Licking the ends is bad. Corrosion. Went through the whole shit with a Technics tech in ATL last year after I went to Ortofon. Thought it was my Pro-55. The shaft in the Ortofon is much shorter than the factory Technics. __________________ no sig

12-21-2003, 02:30 PM	#20
Xplicit Confirmed User Join Date: May 2003 Location: █◄►█ Posts: 3,558	ortofon is better than stanton trackmasters.... that shouldnt be the problem. Maybe you just got a bad needle, exchange it. Don't switch to stanton.

12-21-2003, 02:39 PM	#21
dnsmonster Confirmed User Join Date: Jul 2002 Location: A warm place. Posts: 634	I vouch for Stanton Groovemasters as well. Deep House, Psy Trance, Psy Hardcore here. South Florida peeps need to check me out at Lumonics in Ft. Lauderdale on February 23rd. I am bringing out all my toys: FS, AirFX and maybe even the 303. Those who heard me know my sets are off the hook. Well, this one is bound the be the best eva! __________________ I couldn't possibly know what I'm talking about, I'm completely, absolutely and definitively out of my fucking mind. Last edited by dnsmonster; 12-21-2003 at 02:44 PM..

12-21-2003, 02:40 PM	#22
johnbosh Confirmed User Join Date: Aug 2002 Location: The Netherlands, Rotterdam Posts: 8,965	sweeet

12-21-2003, 03:00 PM	#23
GrimShawn Confirmed User Join Date: Oct 2002 Location: BONEPRONE MANSION serving drinks! Posts: 8,120	damn lots of dj's in here! hit me up on icq! 139682480 I spin dNb mostly, but will bust the hip hop out as well. Also got a killa house selection. Was nice growing up in the late 80's early 90's in chicago!