Overclock ? any programs or sites? - GoFuckYourself.com

Seaz · 01-31-2003, 11:24 PM

hey i am wondering if there is any overclocking programs or sites that can help me pull this off

echo465 · 01-31-2003, 11:26 PM

Quote:

Originally posted by Seaz
hey i am wondering if there is any overclocking programs or sites that can help me pull this off

Google?

www.hardocp.com , then check who they link to.

Roberto · 01-31-2003, 11:26 PM

www.google.com

Seaz · 01-31-2003, 11:27 PM

Quote:

Originally posted by Roberto
www.google.com

google is shit i am looking for people who have tried these programs and sites. i wont just try anything i read on some stupid site

Seaz · 01-31-2003, 11:28 PM

Quote:

Originally posted by Seaz

google is shit i am looking for people who have tried these programs and sites. i wont just try anything i read on some stupid site

and google sucks!!! its not even 50% what it used to be

echo465 · 01-31-2003, 11:29 PM

Quote:

Originally posted by Seaz

google is shit i am looking for people who have tried these programs and sites. i wont just try anything i read on some stupid site

Seaz · 01-31-2003, 11:30 PM

ya for some stupid reason i trust some peps on gfy something must be wrong

Roberto · 01-31-2003, 11:34 PM

Quote:

Originally posted by Seaz
ya for some stupid reason i trust some peps on gfy something must be wrong

Good luck

Seaz · 01-31-2003, 11:34 PM

Quote:

Originally posted by Roberto

Good luck

heh...

Simon-interaid · 01-31-2003, 11:43 PM

If your talking about computer over clocking do this.

Change the CPU multiplier to about 8 - 11x the system bus speed.
You should be able to do this from the bios or open up the case and you'll find jumpers or dip switches to do that.

And make sure you upgrade the fan on top of your CPU to a much better fan or install a second fan if your mother board supports it.

Roberto · 01-31-2003, 11:44 PM

have you tried here? http://www.overclock.com

Seaz · 01-31-2003, 11:44 PM

Quote:

Originally posted by Simon-interaid
If your talking about computer over clocking do this.

Change the CPU multiplier to about 8 - 11x the system bus speed.
You should be able to do this from the bios or open up the case and you'll find jumpers or dip switches to do that.

And make sure you upgrade the fan on top of your CPU to a much better fan or install a second fan if your mother board supports it.

any suggestions on a great fan at a decent price ?

Simon-interaid · 01-31-2003, 11:45 PM

No point of over clocking it too high , because your programs will start fucking up, because the Memory bus wont keep up with the speed of your CPU, and the CPU will go into too many

" Wait States".

Find the default multiplier thats currently set on your CMOS settings and just increase it by 2 or max 3.

Seaz · 01-31-2003, 11:45 PM

Quote:

Originally posted by Roberto
have you tried here? http://www.overclock.com

nope but thanks il check it out

Seaz · 01-31-2003, 11:45 PM

Quote:

Originally posted by Seaz

nope but thanks il check it out

dumbass it has nothing to do with the subject

Seaz · 01-31-2003, 11:47 PM

Quote:

Originally posted by Simon-interaid
No point of over clocking it too high , because your programs will start fucking up, because the Memory bus wont keep up with the speed of your CPU, and the CPU will go into too many

" Wait States".

Find the default multiplier thats currently set on your CMOS settings and just increase it by 2 or max 3.

I am trying to get a new gaming machine going whats the minimum lvl of processor that i should put on it 2.0???

init · 02-01-2003, 12:03 AM

id be careful if you decide to overclock, you can seriously fuck up your cpu and with that being said it depends on what motherboard you have and what bios it came with. for example i run an asus A7V333 and when i go into the bios it will automatically let me overclock it to the speed i want. but if your motherboard didn't come with a bios that lets you overclock you might have to flash it to a new bios ( what this does is replaces your current bios with a new one ) that enabled you to change the multiplier. but flashing your bios can fuck up your motherboard. im tired so im sure im not making much sense heh, so let me list a few sites that you can get a more experienced person to help you:
http://forum.ocworkbench.com/ocwbcgi/ultimatebb.cgi
http://www.overclockers.com.au/

i learned the basics off of those sites and sites linked within those, just be sure you have $ to buy a new comp incase you fuck you yours

Seaz · 02-01-2003, 12:46 AM

Quote:

Originally posted by init
id be careful if you decide to overclock, you can seriously fuck up your cpu and with that being said it depends on what motherboard you have and what bios it came with. for example i run an asus A7V333 and when i go into the bios it will automatically let me overclock it to the speed i want. but if your motherboard didn't come with a bios that lets you overclock you might have to flash it to a new bios ( what this does is replaces your current bios with a new one ) that enabled you to change the multiplier. but flashing your bios can fuck up your motherboard. im tired so im sure im not making much sense heh, so let me list a few sites that you can get a more experienced person to help you:
http://forum.ocworkbench.com/ocwbcgi/ultimatebb.cgi
http://www.overclockers.com.au/

i learned the basics off of those sites and sites linked within those, just be sure you have $ to buy a new comp incase you fuck you yours

awesome man this is what i needed

salsbury · 02-01-2003, 01:43 AM

i have an opposite question.

are there any hardware sites out there that AREN'T all hard about overclocking? i don't really care if my 3000Mhz CPU can go 3050Mhz with a soldering iron and glue.

init · 02-01-2003, 10:53 AM

when i was into modding my case i used to visit this site for reviews and stuff, great inforational site:
http://www.casejunkiez.com/
http://www.overclockers.com.au/
http://www.overclockercafe.com/

McAttack · 02-01-2003, 11:03 AM

My recommendation Seaz by the way you're speaking, don't O/C. I don't think you really fully understand what O/C hardware means and what can happen, or even be able to detect possible signs that damage might occur soon. I've seen way too many guys that talk like what you're saying go out with too little knowledge on how everything works and try to boost stuff up, and bitch other people out because you didn't get the results you wanted or you had problems.

Overclocking should only be done by people that
A) understand what they're doing, not just following steps on a site or magazine.
B) be able to afford to replace your ENTIRE system in case the absolute worst happens.

If you want a faster gaming machine, buy a new CPU and more RAM. And make sure you got a GF4 128MB video card. You'll be flying. If you can't afford that, then you don't qualify for the simple rules I spoke about before.

init · 02-01-2003, 08:44 PM

yea be sure you can afford a new computer incase you fuck yours up, took me weeks of reading before i finally got the balls to flash the bios on an older comp i didnt use to a bios that let me set the multiplier higher. or if you have any old comps laying around those are good to practice on.

init · 02-01-2003, 08:47 PM

oh and if you want a fast system you can clone mine:
asus A7V333 motherboard with an amd XP 2200+ overclocked to 2.2ghz
512 ddr ram
32x speed cd-rw
12x dvd player
geforce4 ti 4600 128 ddr ram
40 & 30 gig hd's at 7200 rpm's
of course cable connection is a must
sound card eh i dont even remember what mine was, its shitty but my Klipsch speakers make them sound good

01-31-2003, 11:24 PM	#1
Seaz Confirmed User Join Date: Mar 2002 Location: Montreal Posts: 773	Overclock ? any programs or sites? hey i am wondering if there is any overclocking programs or sites that can help me pull this off

01-31-2003, 11:26 PM	#3
Roberto Confirmed User Join Date: Oct 2001 Posts: 1,459	www.google.com __________________ i'm a legend in my spare time.

01-31-2003, 11:43 PM	#10
Simon-interaid Confirmed User Join Date: Sep 2002 Location: Vancouver Posts: 814	If your talking about computer over clocking do this. Change the CPU multiplier to about 8 - 11x the system bus speed. You should be able to do this from the bios or open up the case and you'll find jumpers or dip switches to do that. And make sure you upgrade the fan on top of your CPU to a much better fan or install a second fan if your mother board supports it. __________________ we buy domains with typin traffic. icq me 8566256

01-31-2003, 11:44 PM	#11
Roberto Confirmed User Join Date: Oct 2001 Posts: 1,459	have you tried here? http://www.overclock.com __________________ i'm a legend in my spare time.

01-31-2003, 11:45 PM	#13
Simon-interaid Confirmed User Join Date: Sep 2002 Location: Vancouver Posts: 814	No point of over clocking it too high , because your programs will start fucking up, because the Memory bus wont keep up with the speed of your CPU, and the CPU will go into too many " Wait States". Find the default multiplier thats currently set on your CMOS settings and just increase it by 2 or max 3. __________________ we buy domains with typin traffic. icq me 8566256

01-31-2003, 11:30 PM	#7
Seaz Confirmed User Join Date: Mar 2002 Location: Montreal Posts: 773	ya for some stupid reason i trust some peps on gfy something must be wrong

02-01-2003, 12:03 AM	#17
init Confirmed User Join Date: Oct 2002 Location: Sarasota, FL Posts: 973	id be careful if you decide to overclock, you can seriously fuck up your cpu and with that being said it depends on what motherboard you have and what bios it came with. for example i run an asus A7V333 and when i go into the bios it will automatically let me overclock it to the speed i want. but if your motherboard didn't come with a bios that lets you overclock you might have to flash it to a new bios ( what this does is replaces your current bios with a new one ) that enabled you to change the multiplier. but flashing your bios can fuck up your motherboard. im tired so im sure im not making much sense heh, so let me list a few sites that you can get a more experienced person to help you: http://forum.ocworkbench.com/ocwbcgi/ultimatebb.cgi http://www.overclockers.com.au/ i learned the basics off of those sites and sites linked within those, just be sure you have $ to buy a new comp incase you fuck you yours __________________ icq: 2721653

02-01-2003, 01:43 AM	#19
salsbury Confirmed User Join Date: Feb 2002 Location: Seattle Posts: 1,070	i have an opposite question. are there any hardware sites out there that AREN'T all hard about overclocking? i don't really care if my 3000Mhz CPU can go 3050Mhz with a soldering iron and glue. __________________

02-01-2003, 10:53 AM	#20
init Confirmed User Join Date: Oct 2002 Location: Sarasota, FL Posts: 973	when i was into modding my case i used to visit this site for reviews and stuff, great inforational site: http://www.casejunkiez.com/ http://www.overclockers.com.au/ http://www.overclockercafe.com/ __________________ icq: 2721653

02-01-2003, 11:03 AM	#21
McAttack Confirmed User Join Date: Jul 2002 Location: Montreal Posts: 625	My recommendation Seaz by the way you're speaking, don't O/C. I don't think you really fully understand what O/C hardware means and what can happen, or even be able to detect possible signs that damage might occur soon. I've seen way too many guys that talk like what you're saying go out with too little knowledge on how everything works and try to boost stuff up, and bitch other people out because you didn't get the results you wanted or you had problems. Overclocking should only be done by people that A) understand what they're doing, not just following steps on a site or magazine. B) be able to afford to replace your ENTIRE system in case the absolute worst happens. If you want a faster gaming machine, buy a new CPU and more RAM. And make sure you got a GF4 128MB video card. You'll be flying. If you can't afford that, then you don't qualify for the simple rules I spoke about before. __________________ You know Teen Kelly converts like crazy.

02-01-2003, 08:44 PM	#22
init Confirmed User Join Date: Oct 2002 Location: Sarasota, FL Posts: 973	yea be sure you can afford a new computer incase you fuck yours up, took me weeks of reading before i finally got the balls to flash the bios on an older comp i didnt use to a bios that let me set the multiplier higher. or if you have any old comps laying around those are good to practice on. __________________ icq: 2721653

02-01-2003, 08:47 PM	#23
init Confirmed User Join Date: Oct 2002 Location: Sarasota, FL Posts: 973	oh and if you want a fast system you can clone mine: asus A7V333 motherboard with an amd XP 2200+ overclocked to 2.2ghz 512 ddr ram 32x speed cd-rw 12x dvd player geforce4 ti 4600 128 ddr ram 40 & 30 gig hd's at 7200 rpm's of course cable connection is a must sound card eh i dont even remember what mine was, its shitty but my Klipsch speakers make them sound good __________________ icq: 2721653