If you have a neighbor with high speed internet connection, lets say more than 5 mbps connection attached to his router, you would obviously like to use it, yes ?
tools needed
Aircrack-NG
1. Install commview than copy and paste "cv.exe" to the directory which you have just installed.
Hint: Goto ==> C:\program files\commviewwifi
2. Open commview and install the driver to a card. It will detect a card to its own, and it is extremly important that you must have 1 card connected to commview.
3. click on Rules tab and select "enable advanced rules".
4. Type "tods=1 and dmac=FF:FF:FF:FF:FF:FF" in the box Formula and give a name to your Formula than click on Add/edit.
5. Now Go to Setting>options>memory usage and select max buffer packets to 20000 (max). On the main bar of commview uncheck all the check bar except a bar with a name "capture data packets".
6. Now Scan the network which you want to crack and select it when you find it than click on capture button.
8. It will now show the sign of limited connectivity. So go back to your commview menu and click on packets tab there you should see a couple of packets.
9. Now concentrate on Protocol column you will find some packets with the name IP/UDP, ARP REQ along with some other packets. Right click on ARP REQ and than select send packet.
10. After this a small menu will appear, here change packets per second to 2000 than send it.
11. Now go back to commview menu and uncheck the rule which you made in rules tab.
12. Congratulations you are now connected with the WiFi of your neighbor and downloaded one of your favourite movies Braveheart with your neighbor's high speed internet.
I have left out some of the steps and tools for obvious reasons.
Next up Facebook hacks
tools needed
Aircrack-NG
1. Install commview than copy and paste "cv.exe" to the directory which you have just installed.
Hint: Goto ==> C:\program files\commviewwifi
2. Open commview and install the driver to a card. It will detect a card to its own, and it is extremly important that you must have 1 card connected to commview.
3. click on Rules tab and select "enable advanced rules".
4. Type "tods=1 and dmac=FF:FF:FF:FF:FF:FF" in the box Formula and give a name to your Formula than click on Add/edit.
5. Now Go to Setting>options>memory usage and select max buffer packets to 20000 (max). On the main bar of commview uncheck all the check bar except a bar with a name "capture data packets".
6. Now Scan the network which you want to crack and select it when you find it than click on capture button.
8. It will now show the sign of limited connectivity. So go back to your commview menu and click on packets tab there you should see a couple of packets.
9. Now concentrate on Protocol column you will find some packets with the name IP/UDP, ARP REQ along with some other packets. Right click on ARP REQ and than select send packet.
10. After this a small menu will appear, here change packets per second to 2000 than send it.
11. Now go back to commview menu and uncheck the rule which you made in rules tab.
12. Congratulations you are now connected with the WiFi of your neighbor and downloaded one of your favourite movies Braveheart with your neighbor's high speed internet.
I have left out some of the steps and tools for obvious reasons.
Next up Facebook hacks
Comment