Help! Computer is constantly rebooting!
 

My win2k machine is in what seems like a neverending reboot loop. it starts to load (gets to the windows screen) and then goes into reboot. it won't go into safe mode, it won't boot from CD.

anyone have any ideas? how can I fix this fucker??

I have a desktop doing that too :) Except its WinXP

Sounds a bit like the Blaster worm?

You ran Norton on the disk?

Uh oh.

I'll paypal $50 to the person who can provide me with a working fix to my solution. If what you say works, $50 is yours

:thumbsup

I ran norton on it last friday.
nothing detected.
I haven't been able to get on my machine today other than first boot up. I clicked on a link to a page on my server and it rebooted, it hasn't come back since

Yoooo, I help for free.

It's the Blaster worm as told before. Go download the patch. Your system won't reboot if it can't connect to the internet.

I was able to get into safe mode in the command prompt once (haven't since) I looked for the msblast.exe file and it was not on the machine

read about the blaster. That is one of the symptoms

hmm. let me unplug the ethernet in back and try it..

http://www.microsoft.com/security/incident/blast.asp

Here you go, step by step.

still rebooting even without the network cable plugged in:-(

the removal tool would be great if i could get into the machine to install it.

have you altered the hardware in the machine? If you can boot it into safe mode run sysprep from a command prompt. May fix your issue.

This is bad. Let me think...

Hmmm.

nope. it's been the same for months.

can't get into safe mode anymore. I was abnle to get in once and none since.

Hey, a chance to win back our super bowl bet:winkwink:

Have you tried getting it to boot to safe mode???
edit: asked too late lol

When exactelty does it reboot? Random?

Could be other virri. Or your CPU cooler fell of your CPU/is dead. CPU overheats -> reboot. Could be 1000 things, hard to tell.

I would open the machine and re-seed all your cards. If it goes through the boot process (starting windows 2000) and reboots after that point.... chances are pretty good that its a hardware issue...

also be sure your processor is configured at the correct speed.

in the boot sequence, just after the windows 2000 screen shows up and the status bar on the bottom fills. same time every time

Yep... I had the exact same problem... was Blaster Worm.

Use this link to remove it:
http://www3.ca.com/virusinfo/virus.aspx?ID=36265

Good Luck!

did that. no luck.
:-(

oh...also...... remove the battery on the motherboard and put it back in as a last resort.

how do i get into the computer to run the fix??

I will try this next

Save yourself time and stress...forget fixing it...install windows on another hard drive slap the faulty one in as a slave, get your data and move on...

From what I understand (this is what my computer does) he cant run a fix because Windows never loads to the point of being usable. My Windows XP machine loads to the Windows XP loading screen, then reboots. Its not a big deal because its a 2 year old desktop I barely used.

If it won't boot from CD it could be a hardware problem. But since it reboots always at the some moment... I give up. Try booting from floppy with hardware check proggie.

I just noticed this on bootup... what does it mean??

primary IDE channel no 80 conducter cable installed?

It's the DCOM RPC exploit.. just run windows update. You have to beat the attack though, we were racing over here to get windows update finished before it reboot again : )

$50....

For faster datatransfer then 66Mbyte/s to your hard drives you need an 80 wire conductor cable instead of 40 wire cable. Every even wire is connected to ground. But this won't be the problem since your computer will just downgrade the speed to 66MB/s.

Who says reinstalling Windows is gonna help him?

What he said...

No one. But chances are good that it will fix the problem considering that is most likely where the problem lies.

only prob is I can't get far enough into windows to do that

Do you have another harddrive with a operating system ?
Plug it in as master and set your fuckup as slave.

Take whatever you need from fuckup and transfer it
to your master.

Then unplug master and in with fuckup again and the magic:

Format C:

or boot fuckup from your CD with your OS disk
and reinstall everything over your current install.
Might help !