Need help with cpu - GoFuckYourself.com

Va2k · 10-21-2002, 06:20 AM

I just got a k7sem amd duron xp 1200 it's supposed to be 1.2 or 1.3 mhz but its reporting back to me that is onlt 892 mhz would anyone know how to get this fixed?

10-21-2002, 06:24 AM

Ok ok, easy there Tom. Duron XP ? Are you sure it's not an Athlon XP ? Also, are you sure it's not one of those 1200+ models ? The numbers just represent the rating, compared to the equivalent Intel CPUs.

E.g. if you get an Athlon XP 1700+, it only runs at ~1400 Mhz I believe, but is as fast as an imaginary 1700 Mhz Intel.

10-21-2002, 06:25 AM

I guess you got a Duron 1.2Ghz, right ?

10-21-2002, 06:31 AM

are you sure you configured your elitegroup mobo correctly ?

Libertine · 10-21-2002, 07:33 AM

A duron 1200 is, or at least should be, 1200 mhz, or 1.2 Ghz. The Athlon XP crap (Athlon XP 2200 is actually less than 2Ghz) only goes for Athlon XP processors.

machineg · 10-21-2002, 09:49 AM

go into your bios , and set your frequency to 333 !
thatll do it

Va2k · 10-21-2002, 10:11 AM

yes its a duron

Va2k · 10-21-2002, 10:13 AM

* ECS K7SEM266 Socket A SDR Retail Box
* AMD Duron XP 1200+ Socket A OEM
* ECS Socket A Cooling Fan
* Up to 64Mb 3D Video Accelerator
* 10/100Base T Network Card
* 32AW SRS Sound
* ATX Deluxe MidTower 300W P.S.

Va2k · 10-21-2002, 10:13 AM

Quote:

Originally posted by Equinox
are you sure you configured your elitegroup mobo correctly ?

my elitegroup who???????????

Va2k · 10-21-2002, 10:27 AM

Quote:

Originally posted by machineg
go into your bios , and set your frequency to 333 !
thatll do it

there is no where in my bios that has that anywhere. Where i go is it says hit del to enter setup. Is there any other way to get into the bios?

NoCarrier · 10-21-2002, 10:43 AM

That's normal, the AMD 1200+ XP DURON CPU run at 850 mhz

I have a 1800+ wich run at 1533 mhz.. it's only the brand name.. not the cpu frequency.. 1800+ does not run at 1800 mhz

Va2k · 10-21-2002, 10:57 AM

mine is reading 892 I was assured it was a 1.2 gig cpu

Libertine · 10-21-2002, 11:08 AM

Quote:

Originally posted by NoCarrier
That's normal, the AMD 1200+ XP DURON CPU run at 850 mhz

I have a 1800+ wich run at 1533 mhz.. it's only the brand name.. not the cpu frequency.. 1800+ does not run at 1800 mhz

Actually, no. That only goes for the athlon ones.

Va2k · 10-21-2002, 11:10 AM

argh this is driving me nuts lol is there anyone that knows this anwser?

mrthumbs · 10-21-2002, 11:10 AM

nerds

Dildozer · 10-21-2002, 11:10 AM

i bet your multiplier is set at 4.5 and your clock frequency is at 100 (making 200 with DDR)
set it up to 133 (or 266)

Va2k · 10-21-2002, 11:15 AM

ok BUT HOW???? lol

BJ · 10-21-2002, 11:18 AM

no carrier and equinox gave the correct answer.

Va2k · 10-21-2002, 11:24 AM

oh lord im so lost

NoCarrier · 10-21-2002, 11:28 AM

What AMD model do you have?

Athlon or Duron?

If you have an AMD Duron at 1.2 ghz, you are right, there is a problem.

If you have an AMD Athlon 1200+, it runs at 850 mhz...

machineg · 10-21-2002, 11:33 AM

okay , I have the same board as you so I just checked to be sure
hit delet to enter Bios and then select " voltage/frequecy control"
which should be there, seeing as how we have the same model board, however, I may have newer version ( if so Youll have to flash the bios)

and select 133 as frequency
and then reboot and all should be fine

I am running a amd Athlon xp 1900+
and thats all I had to do

hope that helps
LOL
worse comes to worse , do what I did call the closest little puter shop and say you just bought it and..... they help you out

.:Frog:. · 10-21-2002, 11:37 AM

Quote:

Originally posted by va2k
I just got a k7sem amd duron xp 1200 it's supposed to be 1.2 or 1.3 mhz but its reporting back to me that is onlt 892 mhz would anyone know how to get this fixed?

I feel sorry for your situation, you seem like a very nice person but you have terrible luck. Every week something bad is happening to you. I don't know your answer, but I hope you get it sorted out soon.

Va2k · 10-21-2002, 11:44 AM

shit I WOULD be happy if it was a weekly thing with bad luck ITs a everyday thing... lol

I have a amd duron 1200+ xp on a k7sem its not supposed to be 892 its suppose to be higer i went in to my bios and there is NO where where it says frequency
how or where do I get the flash tool to do this flashing

NoCarrier · 10-21-2002, 11:48 AM

Quote:

Originally posted by va2k
shit I WOULD be happy if it was a weekly thing with bad luck ITs a everyday thing... lol

I have a amd duron 1200+ xp on a k7sem its not supposed to be 892 its suppose to be higer i went in to my bios and there is NO where where it says frequency
how or where do I get the flash tool to do this flashing

That does not exist.

It's either an AMD duron 1200 or an Athlon 1200+

You need to know wich one you have, it's kinda important if you want answers.

Va2k · 10-21-2002, 11:50 AM

Quote:

Originally posted by NoCarrier

That does not exist.

It's either an AMD duron 1200 or an Athlon XP 1200+

You need to know wich one you have, it's kinda important if you want answers.

EH?

AMD Duron XP 1200+ Socket A OEM this is what it is

machineg · 10-21-2002, 11:54 AM

turn your ICQ on

machineg · 10-21-2002, 11:57 AM

Quote:

Originally posted by va2k

EH?

AMD Duron XP 1200+ Socket A OEM this is what it is

sounds like you got jacked ?
I dont think that actually exists?
hit me up and I ll try to help you out

NoCarrier · 10-21-2002, 11:58 AM

Quote:

Originally posted by va2k

EH?

AMD Duron XP 1200+ Socket A OEM this is what it is

LOL! Man, wtf is this shit?!

Anyway, found a Yahoo! store selling it ?!

"INCLUDES MOTHER BOARD WITH AMD 1200+ XP DURON CPU(RUNS AT 850 MHZ)"

http://shop.store.yahoo.com/spectrai...dur12xppr.html

Your CPU runs at 850mhz, not 1200 mhz..

If the guy that sold you the CPU claimed it was supposed to run at 1200mhz, you just got ripped off and that seller is partying with naked chicks right now..

ColKurtz · 10-21-2002, 11:59 AM

My cpu is a neural net processor, a learning computer

machineg · 10-21-2002, 12:01 PM

must be one tecnology passed by quick ,
I went from an 800 to a 1000 to a 1300 to a 1900
never saw the 1200+

LOL

wierd

http://www.ecsusa.com/ecsusa/www.ecs...load/index.htm

is the link if you do need to ever flash your bios , but make sure its sunny outside , you lose power , you lose your PC

Libertine · 10-21-2002, 12:05 PM

Quote:

Originally posted by NoCarrier

LOL! Man, wtf is this shit?!

Anyway, found a Yahoo! store selling it ?!

"INCLUDES MOTHER BOARD WITH AMD 1200+ XP DURON CPU(RUNS AT 850 MHZ)"

http://shop.store.yahoo.com/spectrai...dur12xppr.html

Your CPU runs at 850mhz, not 1200 mhz..

If the guy that sold you the CPU claimed it was supposed to run at 1200mhz, you just got ripped off and that seller is partying with naked chicks right now..

This is pretty weird... I'm running a Duron 1200 that actually delivers 1200mhz... Didn't know they also had a rip-off type...

NoCarrier · 10-21-2002, 12:08 PM

Quote:

Originally posted by punkworld

This is pretty weird... I'm running a Duron 1200 that actually delivers 1200mhz... Didn't know they also had a rip-off type...

No, you have a duron 1200, he has a AMD 1200+ XP DURON CPU

Two totally different cpus.

Va2k · 10-21-2002, 12:14 PM

This is where I got if from http://www.actonlinestore.com/smoreinfo.asp?iid=1466
Product Specification:

This kit comes with ECS K7SEM266 motherboard, AMD Duron? XP 1200+ processor, high quality cooling fan with heat sink & ATX 300Watt power supply deluxe midtower case. You also have an option of adding other components. The kit comes assembled & tested with 1 year limited warranty.

Other features:

4X AGPset
ATA100 controller for hard drives
Onboard up to 64Mb video card (can be disabled from BIOS for upgrade purposes)
Onboard 3D sound card (can be disabled from BIOS for upgrade purposes)
Onboard 10/100 LAN adapter
2 PCI slots
1 AMR
2 DIMM sockets for memory
You also get all drivers, manuals and cables!

Use our configurator located on the bottom of the page to help you upgrade and downgrade components to fit this purchase into your budget!

NoCarrier · 10-21-2002, 12:21 PM

Quote:

Originally posted by va2k
This is where I got if from http://www.actonlinestore.com/smoreinfo.asp?iid=1466
Product Specification:

This kit comes with ECS K7SEM266 motherboard, AMD Duron? XP 1200+ processor, high quality cooling fan with heat sink & ATX 300Watt power supply deluxe midtower case. You also have an option of adding other components. The kit comes assembled & tested with 1 year limited warranty.

Other features:

4X AGPset
ATA100 controller for hard drives
Onboard up to 64Mb video card (can be disabled from BIOS for upgrade purposes)
Onboard 3D sound card (can be disabled from BIOS for upgrade purposes)
Onboard 10/100 LAN adapter
2 PCI slots
1 AMR
2 DIMM sockets for memory
You also get all drivers, manuals and cables!

Use our configurator located on the bottom of the page to help you upgrade and downgrade components to fit this purchase into your budget!

Well, according to this page, your cpu runs at 850 mhz, not 1200 mhz. Look at the description of the system.

"INCLUDES MOTHER BOARD WITH AMD 1200+ XP DURON CPU(RUNS AT 850 MHZ)"

http://shop.store.yahoo.com/spectrai...dur12xppr.html

So, you should be lucky to have 892 mhz, you have 42 extra mhz for free!

NoCarrier · 10-21-2002, 12:29 PM

And BTW,

it should be

"AMD Duron 1200 Socket A OEM"

not

"AMD Duron XP 1200+ Socket A OEM"

There isn't a AMD duron xp 1200+ on the market. It's simply a mistake by the retailer.

I found tons of pages with "AMD Duron 1200 Socket A OEM" on google, but 2-3 pages with "AMD Duron XP 1200+ Socket A OEM"

So there is something fishy there..

Va2k · 10-21-2002, 12:31 PM

Hey mate thanks for all ya help I agree something is fishy but for 109.00 what the hell can I complain right? lol thanks for ya help ya know how to overclock the cpu?

NoCarrier · 10-21-2002, 12:38 PM

Quote:

Originally posted by va2k
Hey mate thanks for all ya help I agree something is fishy but for 109.00 what the hell can I complain right? lol thanks for ya help ya know how to overclock the cpu?

Well, according to the official AMD DURON 1200 cpu stats, it should run at 1200 mhz, not 892 mhz. The only way to fix this is with the motherboard.

NoCarrier · 10-21-2002, 12:56 PM

va2k,

read this:

http://www.sysopt.com/userreviews/mb...ECS_K7SEM.html

look at the last review on the page

"Reviewed By:Eric Date: 8/25/2002
If you recieved the K7SEM v3.0 be aware. The bios string after booting this board reads as Duron XP 1200+. This is a lie. The chip that is integrated into this motherboard is actually an older 850Mhz spitfire duron overclocked to 892Mhz. See for yourself. Download a cpu mhz clocking program. I tried both wcpuid and cpu-z and to my amazement found out that I was only getting 892Mhz. ECS/PCChips both won't specify what chip is actually onboard but most online stores are selling these as 1.2Ghz durons. I didn't believe myself until i took off the fan that is on with 2 screws and to my amazement saw D850 in the chips serial number. I would suggest returning this product to the place you got it and filing a complaint with ECS "

So basically, what you got, is really a rip off version, an older 850Mhz spitfire duron overclocked to 892Mhz.

Va2k · 10-21-2002, 01:07 PM

that is no supprise its allways something with my dumb ass

NoCarrier · 10-21-2002, 01:09 PM

Quote:

Originally posted by va2k
that is no supprise its allways something with my dumb ass

Next time, do a little research before buying stuff online

That's some funny shit, I mean, those retailers actually tell people it's at 1200 mhz. They are even using a confusing cpu name that does not exist. LOL!

Va2k · 10-21-2002, 01:13 PM

Quote:

Originally posted by NoCarrier

Next time, do a little research before buying stuff online

You won't be disappointed that way..

Yea no kidding but still really cant complain case mother board etc... only for 109.00 +17 s/h so i can just upgrade the cpu when I get enough saved up to do so. Thanks again mate for your help and if ya need aynthing let me know

TOM

NoCarrier · 10-21-2002, 01:17 PM

Quote:

Originally posted by va2k

Yea no kidding but still really cant complain case mother board etc... only for 109.00 +17 s/h so i can just upgrade the cpu when I get enough saved up to do so. Thanks again mate for your help and if ya need aynthing let me know

TOM

No problem..

By the way, I read somewhere about that ripoff motherboard and cpu that the cpu was soldered to the motherboard LOL! I hope it's not in your case. If it is, I really don't know how you will be able to upgrade your cpu.

Taken from another board :

http://www.techimo.com/forum/t31363.html

"I guess I should clarify a bit.

When the computer is booted it shows that the CPU is an AMD Duron 1200+ (that's what the BIOS says) but in Windows XP it says Duron 892Mhz.

I looked through the BIOS to see if it was a multiplier issue or wasn't set to 133Mhz bus speed and there is no way to change that. There isn't even a jumper to change on the board itself.

I looked through the manual that came with the board (if you call a folded double sided sheet a manual !!) and there is no jumper to set the FSB to 100 or 133MHz. Well there are 2 jumpers on the board 1 to clear the CMOS and another to set the IRQ and base address of the onboard sound.

Jim"

Va2k · 10-21-2002, 01:39 PM

I looking at it now it dont apperar to be soldered

dimonka · 10-21-2002, 02:13 PM

AMD is not as stable as Intel - to many bugs are found... I'd recommend Intel...

Tek-Sup-Port · 10-22-2002, 05:35 PM

the way AMD classifies there CPU is that they add the Mhz, and the FSB ,

i have an athlon XP 1800+

but it is a 1544Mhz, and a FSB of 266 Mhz

they do this because intel is way ahead and it make amd look close in the compatition if they combine the stats

10-21-2002, 06:20 AM	#1
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	Need help with cpu I just got a k7sem amd duron xp 1200 it's supposed to be 1.2 or 1.3 mhz but its reporting back to me that is onlt 892 mhz would anyone know how to get this fixed? __________________

10-21-2002, 07:33 AM	#5
Libertine sex dwarf Join Date: May 2002 Posts: 17,860	A duron 1200 is, or at least should be, 1200 mhz, or 1.2 Ghz. The Athlon XP crap (Athlon XP 2200 is actually less than 2Ghz) only goes for Athlon XP processors. __________________ /(bb\|[^b]{2})/

10-21-2002, 09:49 AM	#6
machineg Confirmed User Join Date: Jun 2002 Posts: 1,090	go into your bios , and set your frequency to 333 ! thatll do it __________________ SIG TOO BIG! Maximum 120x60 button and no more than 3 text lines of DEFAULT SIZE and COLOR. Unless your sig is for a GFY top banner sponsor, then you may use a 624x80 instead of a 120x60.

10-21-2002, 10:11 AM	#7
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	yes its a duron __________________

10-21-2002, 10:13 AM	#8
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	* ECS K7SEM266 Socket A SDR Retail Box * AMD Duron XP 1200+ Socket A OEM * ECS Socket A Cooling Fan * Up to 64Mb 3D Video Accelerator * 10/100Base T Network Card * 32AW SRS Sound * ATX Deluxe MidTower 300W P.S. __________________

10-21-2002, 06:24 AM	#2
X37375787 Guest Posts: n/a	Ok ok, easy there Tom. Duron XP ? Are you sure it's not an Athlon XP ? Also, are you sure it's not one of those 1200+ models ? The numbers just represent the rating, compared to the equivalent Intel CPUs. E.g. if you get an Athlon XP 1700+, it only runs at ~1400 Mhz I believe, but is as fast as an imaginary 1700 Mhz Intel.

10-21-2002, 06:25 AM	#3
X37375787 Guest Posts: n/a	I guess you got a Duron 1.2Ghz, right ?

10-21-2002, 06:31 AM	#4
X37375787 Guest Posts: n/a	are you sure you configured your elitegroup mobo correctly ?

10-21-2002, 10:43 AM	#11
NoCarrier We need more free porn Join Date: Mar 2002 Location: Montreal Posts: 16,356	That's normal, the AMD 1200+ XP DURON CPU run at 850 mhz I have a 1800+ wich run at 1533 mhz.. it's only the brand name.. not the cpu frequency.. 1800+ does not run at 1800 mhz __________________

10-21-2002, 10:57 AM	#12
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	mine is reading 892 I was assured it was a 1.2 gig cpu __________________

10-21-2002, 11:10 AM	#14
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	argh this is driving me nuts lol is there anyone that knows this anwser? __________________

10-21-2002, 11:10 AM	#15
mrthumbs salad tossing sig guy Join Date: Apr 2002 Location: mrthumbs*gmail.com Posts: 11,702	nerds

10-21-2002, 11:10 AM	#16
Dildozer Confirmed User Join Date: Jul 2002 Location: Montreal Posts: 7,519	i bet your multiplier is set at 4.5 and your clock frequency is at 100 (making 200 with DDR) set it up to 133 (or 266) __________________ Spam link here

10-21-2002, 11:15 AM	#17
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	ok BUT HOW???? lol __________________

10-21-2002, 11:18 AM	#18
BJ Confirmed User Join Date: Mar 2002 Location: asia Posts: 5,590	no carrier and equinox gave the correct answer.

10-21-2002, 11:24 AM	#19
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	oh lord im so lost __________________

10-21-2002, 11:28 AM	#20
NoCarrier We need more free porn Join Date: Mar 2002 Location: Montreal Posts: 16,356	What AMD model do you have? Athlon or Duron? If you have an AMD Duron at 1.2 ghz, you are right, there is a problem. If you have an AMD Athlon 1200+, it runs at 850 mhz... __________________ Last edited by NoCarrier; 10-21-2002 at 11:33 AM..

10-21-2002, 11:33 AM	#21
machineg Confirmed User Join Date: Jun 2002 Posts: 1,090	okay , I have the same board as you so I just checked to be sure hit delet to enter Bios and then select " voltage/frequecy control" which should be there, seeing as how we have the same model board, however, I may have newer version ( if so Youll have to flash the bios) and select 133 as frequency and then reboot and all should be fine I am running a amd Athlon xp 1900+ and thats all I had to do hope that helps LOL worse comes to worse , do what I did call the closest little puter shop and say you just bought it and..... they help you out __________________ SIG TOO BIG! Maximum 120x60 button and no more than 3 text lines of DEFAULT SIZE and COLOR. Unless your sig is for a GFY top banner sponsor, then you may use a 624x80 instead of a 120x60. Last edited by machineg; 10-21-2002 at 11:35 AM..

10-21-2002, 11:44 AM	#23
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	shit I WOULD be happy if it was a weekly thing with bad luck ITs a everyday thing... lol I have a amd duron 1200+ xp on a k7sem its not supposed to be 892 its suppose to be higer i went in to my bios and there is NO where where it says frequency how or where do I get the flash tool to do this flashing __________________

10-21-2002, 11:54 AM	#26
machineg Confirmed User Join Date: Jun 2002 Posts: 1,090	turn your ICQ on __________________ SIG TOO BIG! Maximum 120x60 button and no more than 3 text lines of DEFAULT SIZE and COLOR. Unless your sig is for a GFY top banner sponsor, then you may use a 624x80 instead of a 120x60.

10-21-2002, 11:59 AM	#29
ColKurtz So Fucking Banned Join Date: Oct 2002 Location: Cambodia Posts: 596	My cpu is a neural net processor, a learning computer

10-21-2002, 12:01 PM	#30
machineg Confirmed User Join Date: Jun 2002 Posts: 1,090	must be one tecnology passed by quick , I went from an 800 to a 1000 to a 1300 to a 1900 never saw the 1200+ LOL wierd http://www.ecsusa.com/ecsusa/www.ecs...load/index.htm is the link if you do need to ever flash your bios , but make sure its sunny outside , you lose power , you lose your PC __________________ SIG TOO BIG! Maximum 120x60 button and no more than 3 text lines of DEFAULT SIZE and COLOR. Unless your sig is for a GFY top banner sponsor, then you may use a 624x80 instead of a 120x60.

10-21-2002, 12:14 PM	#33
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	This is where I got if from http://www.actonlinestore.com/smoreinfo.asp?iid=1466 Product Specification: This kit comes with ECS K7SEM266 motherboard, AMD Duron? XP 1200+ processor, high quality cooling fan with heat sink & ATX 300Watt power supply deluxe midtower case. You also have an option of adding other components. The kit comes assembled & tested with 1 year limited warranty. Other features: 4X AGPset ATA100 controller for hard drives Onboard up to 64Mb video card (can be disabled from BIOS for upgrade purposes) Onboard 3D sound card (can be disabled from BIOS for upgrade purposes) Onboard 10/100 LAN adapter 2 PCI slots 1 AMR 2 DIMM sockets for memory You also get all drivers, manuals and cables! Use our configurator located on the bottom of the page to help you upgrade and downgrade components to fit this purchase into your budget! __________________

10-21-2002, 12:29 PM	#35
NoCarrier We need more free porn Join Date: Mar 2002 Location: Montreal Posts: 16,356	And BTW, it should be "AMD Duron 1200 Socket A OEM" not "AMD Duron XP 1200+ Socket A OEM" There isn't a AMD duron xp 1200+ on the market. It's simply a mistake by the retailer. I found tons of pages with "AMD Duron 1200 Socket A OEM" on google, but 2-3 pages with "AMD Duron XP 1200+ Socket A OEM" So there is something fishy there.. __________________

10-21-2002, 12:31 PM	#36
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	Hey mate thanks for all ya help I agree something is fishy but for 109.00 what the hell can I complain right? lol thanks for ya help ya know how to overclock the cpu? __________________

10-21-2002, 12:56 PM	#38
NoCarrier We need more free porn Join Date: Mar 2002 Location: Montreal Posts: 16,356	va2k, read this: http://www.sysopt.com/userreviews/mb...ECS_K7SEM.html look at the last review on the page "Reviewed By:Eric Date: 8/25/2002 If you recieved the K7SEM v3.0 be aware. The bios string after booting this board reads as Duron XP 1200+. This is a lie. The chip that is integrated into this motherboard is actually an older 850Mhz spitfire duron overclocked to 892Mhz. See for yourself. Download a cpu mhz clocking program. I tried both wcpuid and cpu-z and to my amazement found out that I was only getting 892Mhz. ECS/PCChips both won't specify what chip is actually onboard but most online stores are selling these as 1.2Ghz durons. I didn't believe myself until i took off the fan that is on with 2 screws and to my amazement saw D850 in the chips serial number. I would suggest returning this product to the place you got it and filing a complaint with ECS " So basically, what you got, is really a rip off version, an older 850Mhz spitfire duron overclocked to 892Mhz. __________________ Last edited by NoCarrier; 10-21-2002 at 01:02 PM..

10-21-2002, 01:07 PM	#39
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	that is no supprise its allways something with my dumb ass __________________

10-21-2002, 01:39 PM	#43
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	I looking at it now it dont apperar to be soldered __________________

10-21-2002, 02:13 PM	#44
dimonka Confirmed User Join Date: Oct 2002 Posts: 477	AMD is not as stable as Intel - to many bugs are found... I'd recommend Intel... __________________ Find out what REBILLS are!

10-22-2002, 05:35 PM	#45
Tek-Sup-Port Registered User Join Date: Oct 2002 Posts: 22	the way AMD classifies there CPU is that they add the Mhz, and the FSB , i have an athlon XP 1800+ but it is a 1544Mhz, and a FSB of 266 Mhz they do this because intel is way ahead and it make amd look close in the compatition if they combine the stats