Izzy - GoFuckYourself.com

Juicy D. Links · 10-25-2005, 10:51 PM

Originally Posted by MrIzzz
you need to have quad shield rg59 throughout your house with no splitters except for the main one coming into the house. make sure all connectors are crimped not twist ons

Fucker seriosly come over one day and help me rewire one line.

MrIzzz · 10-25-2005, 10:52 PM

lol, i replied in your other thread!!!!!!!!

Juicy D. Links · 10-25-2005, 10:55 PM

Quote:

Originally Posted by MrIzzz

lol, i replied in your other thread!!!!!!!!

ok we doing lunch tomorrw?

MrIzzz · 10-25-2005, 11:01 PM

Quote:

Originally Posted by Juicy D. Links

ok we doing lunch tomorrw?

i'll call you tomorrow sweetie

Marcus Aurelius · 10-25-2005, 11:02 PM

If your rewiring for cable RG-59 is a mistake You can get away with it but its better to upgrade. Go with RG-6, its the standard for most cable companies now due to the higher signal demands for digital systems and the DB loss per foot is less than RG-59. Crimp not twist connectors is the way to go and if you can get them, snap and seal connectors are the preferred way to cap your lines, and a single splitter at the wall junction is best, in house splitters will only cause you grief. Go with that setup and you'll be ready for satellite, cable, whatever you wanna throw at it.

And if you are a fiend go with RG-11 through the whole house, although there is no need for it and its overkill you'll have almost no DB loss whatsoever for the short runs required for in house wiring.

(I worked for charter a few years)

Deej · 10-25-2005, 11:02 PM

how cute...love birds

Deej · 10-25-2005, 11:05 PM

You guys should get facials too

MrIzzz · 10-25-2005, 11:07 PM

Quote:

Originally Posted by mdcq

If your rewiring for cable RG-59 is a mistake You can get away with it but its better to upgrade. Go with RG-6, its the standard for most cable companies now due to the higher signal demands for digital systems and the DB loss per foot is less than RG-59. Crimp not twist connectors is the way to go and if you can get them, snap and seal connectors are the preferred way to cap your lines, and a single splitter at the wall junction is best, in house splitters will only cause you grief. Go with that setup and you'll be ready for satellite, cable, whatever you wanna throw at it.

And if you are a fiend go with RG-11 through the whole house, although there is no need for it and its overkill you'll have almost no DB loss whatsoever for the short runs required for in house wiring.

(I worked for charter a few years)

would i notice any difference with rg11 throughout my house? i did mine with rg6 a few months back, no splitters, etc... and i love it

MrIzzz · 10-25-2005, 11:08 PM

Quote:

Originally Posted by Deej

You guys should get facials too

jealousy jealousy!!!! although we could use some eyebrow waxing

Juicy D. Links · 10-26-2005, 07:47 AM

Quote:

Originally Posted by mdcq

If your rewiring for cable RG-59 is a mistake You can get away with it but its better to upgrade. Go with RG-6, its the standard for most cable companies now due to the higher signal demands for digital systems and the DB loss per foot is less than RG-59. Crimp not twist connectors is the way to go and if you can get them, snap and seal connectors are the preferred way to cap your lines, and a single splitter at the wall junction is best, in house splitters will only cause you grief. Go with that setup and you'll be ready for satellite, cable, whatever you wanna throw at it.

And if you are a fiend go with RG-11 through the whole house, although there is no need for it and its overkill you'll have almost no DB loss whatsoever for the short runs required for in house wiring.

(I worked for charter a few years)

Cool thanks yo , Izzy get some of this shit for me.

Basic_man · 10-26-2005, 07:49 AM

Quote:

Originally Posted by mdcq

If your rewiring for cable RG-59 is a mistake You can get away with it but its better to upgrade. Go with RG-6, its the standard for most cable companies now due to the higher signal demands for digital systems and the DB loss per foot is less than RG-59. Crimp not twist connectors is the way to go and if you can get them, snap and seal connectors are the preferred way to cap your lines, and a single splitter at the wall junction is best, in house splitters will only cause you grief. Go with that setup and you'll be ready for satellite, cable, whatever you wanna throw at it.

And if you are a fiend go with RG-11 through the whole house, although there is no need for it and its overkill you'll have almost no DB loss whatsoever for the short runs required for in house wiring.

(I worked for charter a few years)

Thanks for all the tips mate

10-25-2005, 10:51 PM	#1
Juicy D. Links So Fucking Banned Industry Role: Join Date: Apr 2001 Location: N.Y. -Long Island -- Posts: 122,992	Izzy Originally Posted by MrIzzz you need to have quad shield rg59 throughout your house with no splitters except for the main one coming into the house. make sure all connectors are crimped not twist ons Fucker seriosly come over one day and help me rewire one line.

10-25-2005, 10:52 PM	#2
MrIzzz If u touch it, I will cum Join Date: Sep 2003 Location: long island Posts: 22,923	lol, i replied in your other thread!!!!!!!! __________________ WHO WANTS TO PLAY GRAB-ASS?

10-25-2005, 11:02 PM	#6
Deej I make pixels work Industry Role: Join Date: Jun 2005 Location: I live here... Posts: 24,386	how cute...love birds __________________ Deej's Designs n' What Not Hit me up for Design, CSS & Photo Retouching Icq#30096880

10-25-2005, 11:05 PM	#7
Deej I make pixels work Industry Role: Join Date: Jun 2005 Location: I live here... Posts: 24,386	You guys should get facials too __________________ Deej's Designs n' What Not Hit me up for Design, CSS & Photo Retouching Icq#30096880

10-25-2005, 11:02 PM	#5
Marcus Aurelius No Refunds Issued. Industry Role: Join Date: Apr 2003 Posts: 14,809	If your rewiring for cable RG-59 is a mistake You can get away with it but its better to upgrade. Go with RG-6, its the standard for most cable companies now due to the higher signal demands for digital systems and the DB loss per foot is less than RG-59. Crimp not twist connectors is the way to go and if you can get them, snap and seal connectors are the preferred way to cap your lines, and a single splitter at the wall junction is best, in house splitters will only cause you grief. Go with that setup and you'll be ready for satellite, cable, whatever you wanna throw at it. And if you are a fiend go with RG-11 through the whole house, although there is no need for it and its overkill you'll have almost no DB loss whatsoever for the short runs required for in house wiring. (I worked for charter a few years)