Help! Electricians, Computer geeks, whoever, help!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Elli
    Reach for those stars!
    • Apr 2003
    • 17991
    #1

    Help! Electricians, Computer geeks, whoever, help!

    So I shot a Valentine's video last night that's 17 minutes long for my Valentine's Day update today. Then I FOUGHT WITH MY STUPID COMPUTER until 5am trying to get it to capture without buzzing. It captured tons of other stuff fine. But now there's a loud hum through everything. (doesn't matter which pgm I capture with) I tried everything!

    I ran the camcorder off battery power instead of ac. I captured with the speakers disconnected from the computer. I captured with the speakers turned off. I captured with all manner of mixer settings and windows settings. Still no dice.

    I have:

    - replaced the 230 watt power supply and faulty fan with the new 430 watt Antec TruePower (http://www.antec.com/us/productDetails.php?ProdID=20430) that I was saving for my project computer.

    - installed a new Bytecc Firewire IEEE 1394a 3 port PCI card (in case the problem was the firewire port on the sound card)

    - experimented with a RadioShack Ground Loop Isolator.

    - used the firewire cable that came with the Bytecc card.

    - unplugged the speakers entirely, and also plugged them into a wall outlet separate from my computer tower

    - muted all the sound card inputs other than the one I am using

    - tried raising the tower onto books so it's not touching the ground (?)

    Result:

    My tower is much quieter now, thanks to the new power supply and fan. The buzz persists.

    ANY help would be much appreciated!
    email: [email protected]
    Tags: None
    • baddog
      So Fucking Banned
      • Apr 2001
      • 107089
      #2
      you should have requested a carpenter

        Comment

        • Elli
          Reach for those stars!
          • Apr 2003
          • 17991
          #3
          I don't get it. Has GFY changed while my back was turned?
          email: [email protected]

            Comment

            • Manansala
              Confirmed User
              • Jan 2005
              • 551
              #4
              Originally posted by Elli
              I don't get it. Has GFY changed while my back was turned?
              No, it's just stress.
              Your buzz will only last not more than 30 minutes and it'll be gone. That buzz is caused by hardware failure over devices that requires more power than the usual. e.g. HD only requires 9v and you've been using your HD for longer hours, it's extending it's 9v to 12v. Now when you turn your machine on, it buzzes coz the power supply is only giving it 9v (coz that's what the power supply knows) while the HD is requiring 12v due to overuse. This applies not just do HD, mostly fans etc..

              This happens to many devices, not just computers as well.

              I hope I made a nice fact.

              EDIT: Buzzing while capturing, you need more power.
              Last edited by Manansala; 02-14-2005, 02:02 PM.
              I don't have a signature. !

                Comment

                • JFPdude
                  Confirmed User
                  • Jan 2002
                  • 4027
                  #5
                  Originally posted by Manansala
                  No, it's just stress.
                  Your buzz will only last not more than 30 minutes and it'll be gone. That buzz is caused by hardware failure over devices that requires more power than the usual. e.g. HD only requires 9v and you've been using your HD for longer hours, it's extending it's 9v to 12v. Now when you turn your machine on, it buzzes coz the power supply is only giving it 9v (coz that's what the power supply knows) while the HD is requiring 12v due to overuse. This applies not just do HD, mostly fans etc..

                  This happens to many devices, not just computers as well.

                  I hope I made a nice fact.
                  What he said

                    Comment

                    • Elli
                      Reach for those stars!
                      • Apr 2003
                      • 17991
                      #6
                      Originally posted by Manansala
                      No, it's just stress.
                      Your buzz will only last not more than 30 minutes and it'll be gone. That buzz is caused by hardware failure over devices that requires more power than the usual. e.g. HD only requires 9v and you've been using your HD for longer hours, it's extending it's 9v to 12v. Now when you turn your machine on, it buzzes coz the power supply is only giving it 9v (coz that's what the power supply knows) while the HD is requiring 12v due to overuse. This applies not just do HD, mostly fans etc..

                      This happens to many devices, not just computers as well.

                      I hope I made a nice fact.

                      EDIT: Buzzing while capturing, you need more power.
                      So how long do I turn my pc off for to reset the power? It was off for a good 20 minutes while I installed the new hardware.

                      And you would think a 430 watt power supply would be able to handle the draw, wouldn't you?

                      It doesn't buzz audibly. There is only buzz in the audio track of stuff I have captured through firewire.
                      email: [email protected]

                        Comment

                        • jukeboxfrank
                          Confirmed User
                          • Apr 2004
                          • 1207
                          #7
                          you are getting feed back, try to check your sound input. And guys don't quit your day jobs......


                          ICQ= 231-182-592

                            Comment

                            • Elli
                              Reach for those stars!
                              • Apr 2003
                              • 17991
                              #8
                              Nm, I found out the tape has degraded, that's all. Other tapes capture fine. Ugh. Now I have to reshoot.

                              Thanks for the suggestions, guys!
                              email: [email protected]

                                Comment

                                • sixxxthsense
                                  Confirmed User
                                  • Aug 2004
                                  • 2421
                                  #9
                                  Originally posted by JFPdude
                                  What he said

                                  you have no idea what he said

                                    Comment

                                    Previous template Next
                                    Working...