SHIT! Piercing emergency... - GoFuckYourself.com

RRRED · 11-15-2004, 09:59 PM

What do I do? I have this eyebrow ring I got like 7 weeks ago or so and I can't get it out! It's kinda thick... your first ones are supposed to be till they heal.

I bought some cute thinner wired ones with different colored stones and now I can't get the damn thing out! It's not screwed in I don't think. Anyone here that can help me out?

Spunky · 11-15-2004, 10:00 PM

Cut it in half?

candyflip · 11-15-2004, 10:00 PM

Were you moving it around while it was healing so that the skin didn't grow and attach itself to the metal?

That's the only thing that comes to mind.

Pornweaver · 11-15-2004, 10:00 PM

Needle nose pliers.

Is it the little ball clasp thing? If so, hold the hoop with the pliers and use your finger to "pop" the ball out.

SomeCreep · 11-15-2004, 10:00 PM

Quote:

Originally posted by RRRED
What do I do? I have this eyebrow ring I got like 7 weeks ago or so and I can't get it out! It's kinda thick... your first ones are supposed to be till they heal.

I bought some cute thinner wired ones with different colored stones and now I can't get the damn thing out! It's not screwed in I don't think. Anyone here that can help me out?

Go back to the piercing shop. The guy there will take it out for you.

Wiggles · 11-15-2004, 10:01 PM

if its got a ball then it screws out, if its just a wire then it pulls apart.

Varius · 11-15-2004, 10:01 PM

What shape is it? Depending on the piercing, you may need pliers to get it open.

Also if it's new, you could have some dried blood or puss thats sticking to it. Just play with it enough and it'll come out.

DON'T try and pull it out (like an angry girl did to me once), heh it leaves a little scar and hurts

baddog · 11-15-2004, 10:02 PM

a firecracker should work

media · 11-15-2004, 10:03 PM

rrred,

in order to get the ball out your going to need to put reverse pressure on the ring, a good generic way to do this is to use some scissors wrap some tape around the ends so you do not create burs on the metal ring..

You might need to put some decent pressure on the ring to open it up.. But be very careful as to not put too much pressure to bend your ring..

This should help.. if it does not, hit me up on aim and let me know whats happening..

Varius · 11-15-2004, 10:05 PM

I know for my lip ring, it's pretty thick and the guy at peicing shop used pliers to open it when I changed it

RRRED · 11-15-2004, 10:10 PM

Well I can't go back to the place cuz I did it in Dallas.. there are no shops like that where I'm from...

Yeah it moves around good and its very clean and healed well... its the fucking ball... it seems like it should screw and let loose of one end but when it turn it either direction... no openings.

I'll try the trick with the scissors... I think I saw my son with some pliers the other day... I'll see if he has them... It's strong though shit I hope I don't lose an eye.

Eeeesh

media · 11-15-2004, 10:18 PM

Two pairs of pliers with electrical tape wrapped around them.. do not use bare metal to bare metal.. Twist on both top and bottom to loosen it up..

Also be careful you could get an infection from using dirty ass garage tools..

European Lee · 11-15-2004, 10:23 PM

This thread is useless without pics hon ;)

Regards,

Lee

RRRED · 11-15-2004, 10:34 PM

Quote:

Originally posted by European Lee
This thread is useless without pics hon ;)

Regards,

Lee

Well I can do better than pics Lee, you can come hold my hand in santa monica while I go somewhere that can take this dang thing out...

Wait, maybe I should let shok do it... NOT

TKoProductions · 11-15-2004, 10:35 PM

Yea, after you're done fucking up your eyebrow and gouging out your eyeball, lets get some shots of the destruction.

webair · 11-15-2004, 10:40 PM

alcohol + Vaseline +

= easy removal of eyebrow ring

media · 11-15-2004, 10:41 PM

Quote:

Originally posted by webair
alcohol + Vaseline + = easy removal of eyebrow ring

NEVER use alcohol around the eye, especially on an irritated piercing.. It has drying agents in it... and can cause infection..

TheGoldenChild · 11-15-2004, 10:54 PM

put some tussin on it.

Tala · 11-15-2004, 11:05 PM

Quote:

Originally posted by RRRED
Yeah it moves around good and its very clean and healed well... its the fucking ball... it seems like it should screw and let loose of one end but when it turn it either direction... no openings.

This sounds to me like a captive bead that won't let go? Wish I was there, I have a pair of ring openers.

Do what media said. Wrap duct tape or electrical tape around the individual pointy ends of the scissors, (so you don't gouge your eyes out and to not mar the ring and to give the rings something soft to sit against instead of sliding on metal), and very slowly and carefully insert them (closed) into the ring, then slowly and carefully open the scissors. Ball should pop out as soon as the ring hasn't enough pressure to hold it.

EDIT: If you're talking about a curved barbell, the ball is on WAY too tight. you may have to hold one end and get your son to twist the other. If you can't get it out that way, head over to your local tattoo studio and get the piercer to get it out for you. Be careful, though, or you can very easily rip the piercing out.

Tala · 11-15-2004, 11:09 PM

Side note: I hate captive ball rings. I can't get the goddamn ball IN it! I have one in my right ear, and damned if it ain't staying there. I'm not gonna fuck with it.

The ring in my nose was a captive ball, but after twenty minutes and bloodshed, I just closed the goddamn thing and threw the ball somewhere across the room.

BitterPen · 11-15-2004, 11:09 PM

I have helped a few people get piercings out, but without knowing the exact type of jewelry, it will be hard to help. Is it a ring? Is it a barbell? Describe it or go find a pic. If it is the screwed in kind, use rubber gloves to help give you a better grip. If it is a ring with a ball in the middle... the ball just pops out.

Anyway, good luck. Hit me up on Q if you want me to try to help.

prodiac · 11-15-2004, 11:15 PM

I just got my 2nd eyebrow done a couple weeks ago, I got my first one 5 years ago .. I recently went to change the ball on top to a spike, and I had the same problem getting it off. They had mis-threaded it, so it would not unscrew. I had to use needle nose pliers to pull it off, it was just stuck on a little crooked.

BitterPen · 11-15-2004, 11:16 PM

Quote:

Originally posted by Tala
Side note: I hate captive ball rings. I can't get the goddamn ball IN it! I have one in my right ear, and damned if it ain't staying there. I'm not gonna fuck with it.

The ring in my nose was a captive ball, but after twenty minutes and bloodshed, I just closed the goddamn thing and threw the ball somewhere across the room.

ROFL! I used to have problems with them... but now I've kinda become the piercing helper for all my friends. I have helped many people get their piercings in and out. It's so funny when people don't know that all you have to do is pop out the little ball... they try turning it, twisting it, etc and can't get it out.

I let my navel grow back when I got pregnant. I don't have any other piercings that take those... just my tongue and 7 in my ears.

Tala · 11-15-2004, 11:16 PM

Quote:

Originally posted by BitterPen
I have helped a few people get piercings out, but without knowing the exact type of jewelry, it will be hard to help. Is it a ring? Is it a barbell? Describe it or go find a pic. If it is the screwed in kind, use rubber gloves to help give you a better grip. If it is a ring with a ball in the middle... the ball just pops out.

Anyway, good luck. Hit me up on Q if you want me to try to help.

Want some new piercings?

I've got the stuff and the know-how.

Tala · 11-15-2004, 11:22 PM

Quote:

Originally posted by BitterPen
ROFL! I used to have problems with them... but now I've kinda become the piercing helper for all my friends. I have helped many people get their piercings in and out. It's so funny when people don't know that all you have to do is pop out the little ball... they try turning it, twisting it, etc and can't get it out.

I let my navel grow back when I got pregnant. I don't have any other piercings that take those... just my tongue and 7 in my ears.

I can do it for other people but when it comes to my own, I'm screwed...(pun intended)

I'm seriously debating on a labret, and I'm gauging my ears up a little more. Right now they're 8, but I want 4. There's a beautiful set of swans that I'd like to wear, but they're 4s, not 8s.

I've never had a bellybutton ring. I have too much belly for it. Had my nips a couple three years ago, but kept tearing them so took them out. Had a hoodie, but lost it one night (don't ask) and never got it redone. Took the tongue ring out after $1500 of dental work.

Now ears twice, thrice if you count the helix in my right ear, getting an indie soon, and seriously debating the labret. NO SEPTUM!! It would look HORRID on me.

European Lee · 11-16-2004, 12:12 AM

Quote:

Originally posted by RRRED
Well I can do better than pics Lee, you can come hold my hand in santa monica while I go somewhere that can take this dang thing out...

Wait, maybe I should let shok do it... NOT

Haha wish i could doll but we wont be attending WA.

We're in the process of rolling out some new stuff which is going to be taking up all our time until the end of December

We'll see you guys in Vegas though

Have a couple of drinks for me in Santa Monica though

Regards,

Lee

kmanrox · 11-16-2004, 12:35 AM

hey red, dont you like run some smalltime affiliate program nowadays?

BitterPen · 11-16-2004, 12:36 AM

Quote:

Originally posted by Tala
Want some new piercings?

I've got the stuff and the know-how.

Hit me up! I have been debating a few different piercings.

Dagwolf · 11-16-2004, 12:45 AM

Over 2 hours now and no word from RRRed... Hope the scissors didn't slip!

maja · 11-16-2004, 12:53 AM

Quote:

Originally posted by Tala
I can do it for other people but when it comes to my own, I'm screwed...(pun intended)

I'm seriously debating on a labret, and I'm gauging my ears up a little more. Right now they're 8, but I want 4. There's a beautiful set of swans that I'd like to wear, but they're 4s, not 8s.

I've never had a bellybutton ring. I have too much belly for it. Had my nips a couple three years ago, but kept tearing them so took them out. Had a hoodie, but lost it one night (don't ask) and never got it redone. Took the tongue ring out after $1500 of dental work.

Now ears twice, thrice if you count the helix in my right ear, getting an indie soon, and seriously debating the labret. NO SEPTUM!! It would look HORRID on me.

I've had a labret and had to take it out because the flat metal backing was wearing down my gums within 5 months. It was minimal damage when i took it out, but i'm glad I did, I would NOT want a friggin gum graft! I've seen quite a few ppl who have worn down gums from a labret. There's the fishtail option but it looks way too big for my mouth.

How did you end up tearing the nipple ring?? I've never had a problem with that. YIKES!!!!

Now all i have is my septum and lip done (new!)

SleazyDream · 11-16-2004, 12:53 AM

nothing a good pair of vise grips won't fix

Tat2Jr · 11-16-2004, 12:59 AM

Quote:

Originally posted by kBizzle
put some tussin on it.

RRRED - So we don't need to exchange pics afterall..... I'll just look for the one eyed chick. But just to make sure, which eye is it?

I use to have a kick butt nipple ring with spikes as the balls, but I had to get a few MRIs and it had to come out.... I didn't get it back in before it closed up. Now, I'm not cool anymore.

datatank · 11-16-2004, 01:05 AM

[email protected] NICE EMAIL

Congrats.

Sean · 11-16-2004, 03:03 AM

hey red, if you are still having a snag getting the ring out, call me or icq me and i will walk you thru it

webmaster x · 11-16-2004, 08:40 AM

Quote:

Originally posted by RRRED
What do I do? I have this eyebrow ring I got like 7 weeks ago or so and I can't get it out! It's kinda thick... your first ones are supposed to be till they heal.

I bought some cute thinner wired ones with different colored stones and now I can't get the damn thing out! It's not screwed in I don't think. Anyone here that can help me out?

try rinsing it w/ soap

Doc911 · 11-16-2004, 10:55 AM

Just grab the "top" of the ring with your right thumb and forefinger.

Grab the "ball" with the thumb and forfinger of your left hand.

Hold the ring steady with your right hand and pull down and out on the ball with your left.

The ball will slip out from between the two metal points on the ring.

woodman · 11-16-2004, 11:02 AM

Come on guys it's so simple.

All you need are pliers and a set of thirty weigh ball bearings. The trick is to make sure you prepare the Fetzer valve with some 3-in-1 oil and some gauze pads.

Jace · 11-16-2004, 11:04 AM

Quote:

Originally posted by Wiggles
if its got a ball then it screws out, if its just a wire then it pulls apart.

that ain't true

there are new barbells that pull apart, no screwing

Extreme Holly · 11-16-2004, 11:07 AM

this thread makes me queasy

Basic_man · 11-16-2004, 11:11 AM

Put some vasoline, maybe it will help..

Tala · 11-16-2004, 11:24 AM

Quote:

Originally posted by Irish Pimp
hey red, if you are still having a snag getting the ring out, call me or icq me and i will walk you thru it

Where were you when I needed help with mine??

Tala · 11-16-2004, 11:28 AM

Quote:

Originally posted by maja
I've had a labret and had to take it out because the flat metal backing was wearing down my gums within 5 months. It was minimal damage when i took it out, but i'm glad I did, I would NOT want a friggin gum graft! I've seen quite a few ppl who have worn down gums from a labret. There's the fishtail option but it looks way too big for my mouth.

How did you end up tearing the nipple ring?? I've never had a problem with that. YIKES!!!!

Now all i have is my septum and lip done (new!)

I've seen and heard horrors of labrets. Maybe I should get venoms instead.

The tearing of the nipple rings? Lemme think: helped a friend move, tore the right one slightly, had to let it heal back up, got into a fight with a cat, (the cat won), and the cat's claw went through shirt and bra and found ring, yanked, OUCH! I said screw it and took 'em out.

Besides, it's not easy to suck a nip that has a captive ball ring in it.....but if you use your teeth very gently to grasps the nip on either side of the ring.....

Peaches · 11-16-2004, 11:38 AM

Where did RRRed go??!!

LeeNoga · 11-16-2004, 11:48 AM

Lee [not the same person as Euro Lee] fast forwards to the end of this movie, and waiting for the ending...

Ya get that pipe out RRRED?

If it were me I would have cut the metal.

RRRED · 11-16-2004, 02:55 PM

OK I got it out! I took a pair of medical scissors with little short blades... then I grabbed a kotex pantyliner and cut a strip off about a half a millimeter thin... cut that in half and wrapped it around the blades (the sticky back was useful and the top was cushiony for stability ha) ...

Then I shoved the blades up and opened them as hard as I could and got it to give just a smidge.. then took them out and pushed the ball out as hard as i could! Plink right down the drain though but thats ok.

Now it's got a nicer little wire with a pink sparkly ball... much more my style... THE END

Thanks for the advice guys really..

XxXotic · 11-16-2004, 02:56 PM

Quote:

Originally posted by SomeCreep
Go back to the piercing shop. The guy there will take it out for you.

edit - congrats on finally gettin it out

LeeNoga · 11-16-2004, 02:58 PM

RRRED

sickkittens · 11-16-2004, 02:59 PM

This thread was worthless without at least some sort of nasty pic.

The Heron · 11-16-2004, 03:11 PM

Go get a shotgun, have someone point it at the piercing and shoot it off! I am sure it will eliminate this problem and with any luck you have not bred yet.

Denis_SC · 11-16-2004, 03:19 PM

Quote:

Originally posted by webair
alcohol + Vaseline + = easy removal of eyebrow ring

" alcohol + Vaseline +

= easy removal of eyebrow" you mean ?

11-15-2004, 09:59 PM	#1
RRRED Confirmed User Join Date: Jan 2001 Location: WA Posts: 6,754	SHIT! Piercing emergency... What do I do? I have this eyebrow ring I got like 7 weeks ago or so and I can't get it out! It's kinda thick... your first ones are supposed to be till they heal. I bought some cute thinner wired ones with different colored stones and now I can't get the damn thing out! It's not screwed in I don't think. Anyone here that can help me out?

11-15-2004, 10:00 PM	#2
Spunky I need a beer Industry Role: Join Date: Jun 2002 Location: ♠ Toiletville ♠ Posts: 133,944	Cut it in half? __________________ *YOUR INFORMATION HERE*

11-15-2004, 10:00 PM	#3
candyflip Carpe Visio Industry Role: Join Date: Jul 2002 Location: New York Posts: 43,064	Were you moving it around while it was healing so that the skin didn't grow and attach itself to the metal? That's the only thing that comes to mind. __________________ Spend you some brain. Email Me

11-15-2004, 10:01 PM	#6
Wiggles Too lazy to set a custom title Join Date: May 2004 Posts: 14,423	if its got a ball then it screws out, if its just a wire then it pulls apart. __________________ no sig

11-15-2004, 10:01 PM	#7
Varius Confirmed User Industry Role: Join Date: Jun 2004 Location: New York, NY Posts: 6,890	What shape is it? Depending on the piercing, you may need pliers to get it open. Also if it's new, you could have some dried blood or puss thats sticking to it. Just play with it enough and it'll come out. DON'T try and pull it out (like an angry girl did to me once), heh it leaves a little scar and hurts __________________ Skype variuscr - Email varius AT gmail

11-15-2004, 10:00 PM	#4
Pornweaver Confirmed User Join Date: Aug 2004 Posts: 855	Needle nose pliers. Is it the little ball clasp thing? If so, hold the hoop with the pliers and use your finger to "pop" the ball out.

11-15-2004, 10:02 PM	#8
baddog So Fucking Banned Industry Role: Join Date: Apr 2001 Location: the beach, SoCal Posts: 107,089	a firecracker should work

11-15-2004, 10:03 PM	#9
media Confirmed Moneymaker Industry Role: Join Date: Apr 2002 Location: Eugene, OR It's Like Jail, Only with Trees! Posts: 9,852	rrred, in order to get the ball out your going to need to put reverse pressure on the ring, a good generic way to do this is to use some scissors wrap some tape around the ends so you do not create burs on the metal ring.. You might need to put some decent pressure on the ring to open it up.. But be very careful as to not put too much pressure to bend your ring.. This should help.. if it does not, hit me up on aim and let me know whats happening.. __________________ I'm here for the violence!

11-15-2004, 10:05 PM	#10
Varius Confirmed User Industry Role: Join Date: Jun 2004 Location: New York, NY Posts: 6,890	I know for my lip ring, it's pretty thick and the guy at peicing shop used pliers to open it when I changed it __________________ Skype variuscr - Email varius AT gmail

11-15-2004, 10:10 PM	#11
RRRED Confirmed User Join Date: Jan 2001 Location: WA Posts: 6,754	Well I can't go back to the place cuz I did it in Dallas.. there are no shops like that where I'm from... Yeah it moves around good and its very clean and healed well... its the fucking ball... it seems like it should screw and let loose of one end but when it turn it either direction... no openings. I'll try the trick with the scissors... I think I saw my son with some pliers the other day... I'll see if he has them... It's strong though shit I hope I don't lose an eye. Eeeesh

11-15-2004, 10:18 PM	#12
media Confirmed Moneymaker Industry Role: Join Date: Apr 2002 Location: Eugene, OR It's Like Jail, Only with Trees! Posts: 9,852	Two pairs of pliers with electrical tape wrapped around them.. do not use bare metal to bare metal.. Twist on both top and bottom to loosen it up.. Also be careful you could get an infection from using dirty ass garage tools.. __________________ I'm here for the violence!

11-15-2004, 10:23 PM	#13
European Lee Confirmed User Join Date: Dec 2002 Location: Daytona Beach Posts: 7,133	This thread is useless without pics hon ;) Regards, Lee __________________ YOUR TRAFFIC IS SAFE WITH US - CONDOM CASH PUTTING THE GAY ADULT INDUSTRY ON YOUR PC!! AFFORDABLE 2257 COMPLIANT GAY + BI CONTENT

11-15-2004, 10:35 PM	#15
TKoProductions Confirmed User Join Date: Mar 2004 Location: Los Angeles Posts: 673	Yea, after you're done fucking up your eyebrow and gouging out your eyeball, lets get some shots of the destruction.

11-15-2004, 10:40 PM	#16
webair Confirmed User Industry Role: Join Date: Feb 2002 Location: NYC, NY Posts: 8,531	alcohol + Vaseline + = easy removal of eyebrow ring __________________ ~ Webair Dedicated Cloud Servers™ ~ WEBAIR VSYS™ Virtual Hosting Platform ~ Superior CDN Network ~ ~ Managed Dedicated hosting Specialists ~ DISCOUNT DOMAIN NAMES! ~ WEBAIR FUSION IO MANAGED CLOUD SERVERS! ~ *ICQ:* 243116321 - *TWITTER* - @WEBAIRINC - E-Mail: [email protected]

11-15-2004, 10:54 PM	#18
TheGoldenChild Confirmed User Join Date: May 2002 Location: Pacific Palisades Posts: 6,940	put some tussin on it. __________________

11-15-2004, 11:09 PM	#20
Tala Fucked if I know Join Date: Dec 2002 Location: Do you have a flag? Posts: 23,368	Side note: I hate captive ball rings. I can't get the goddamn ball IN it! I have one in my right ear, and damned if it ain't staying there. I'm not gonna fuck with it. The ring in my nose was a captive ball, but after twenty minutes and bloodshed, I just closed the goddamn thing and threw the ball somewhere across the room. __________________ ICQ: 11120676 \| Google: mindcrime \| Skype: suitemindcrime\|E-Mail: mindcrime AT gmail.com\|PR girl with great writing skills for hire!!!! Contact me to work for YOU!\|TECHIEMEDIA? 24/7 support from some of the best techs in the biz. Tell Jim that I sent you.

11-15-2004, 11:09 PM	#21
BitterPen Confirmed User Join Date: Sep 2004 Location: TN Posts: 1,926	I have helped a few people get piercings out, but without knowing the exact type of jewelry, it will be hard to help. Is it a ring? Is it a barbell? Describe it or go find a pic. If it is the screwed in kind, use rubber gloves to help give you a better grip. If it is a ring with a ball in the middle... the ball just pops out. Anyway, good luck. Hit me up on Q if you want me to try to help. __________________

11-15-2004, 11:15 PM	#22
prodiac Confirmed User Industry Role: Join Date: Sep 2003 Location: amerinoc.com Posts: 419	I just got my 2nd eyebrow done a couple weeks ago, I got my first one 5 years ago .. I recently went to change the ball on top to a spike, and I had the same problem getting it off. They had mis-threaded it, so it would not unscrew. I had to use needle nose pliers to pull it off, it was just stuck on a little crooked.

11-16-2004, 12:35 AM	#27
kmanrox aka K-Man Industry Role: Join Date: Oct 2001 Location: The Gutter Posts: 29,292	hey red, dont you like run some smalltime affiliate program nowadays? __________________ Crypto HODLr Crypto mining Angel investor

11-16-2004, 12:45 AM	#29
Dagwolf President of Canada Join Date: Sep 2003 Location: Leaving Hell, Entering Limbo Posts: 23,141	Over 2 hours now and no word from RRRed... Hope the scissors didn't slip! __________________ Sleep well, and dream of large women.

11-16-2004, 12:53 AM	#31
SleazyDream I'm here for SPORT Industry Role: Join Date: Jul 2001 Location: Phone # (401) 285-0696 Posts: 41,470	nothing a good pair of vise grips won't fix __________________ This dog, is dog, a dog, good dog, way dog, to dog, keep dog, an dog, idiot dog, busy dog, for dog, 20 dog, seconds dog! Now read without the word dog.

11-16-2004, 01:05 AM	#33
datatank Confirmed User Join Date: Aug 2004 Location: My dog is blacker than Tupac Posts: 5,471	[email protected] NICE EMAIL Congrats.

11-16-2004, 03:03 AM	#34
Sean revolutionforce.com Industry Role: Join Date: Jun 2003 Location: i moved from an ICQ box to a Skype box. left the skype box for a telegram box Posts: 2,909	hey red, if you are still having a snag getting the ring out, call me or icq me and i will walk you thru it __________________ -sean skype: sean.a.christian sean @ revolutionforce.com

11-16-2004, 10:55 AM	#36
Doc911 Confirmed User Join Date: Feb 2004 Location: If i was up your ass you'd know Posts: 3,695	Just grab the "top" of the ring with your right thumb and forefinger. Grab the "ball" with the thumb and forfinger of your left hand. Hold the ring steady with your right hand and pull down and out on the ball with your left. The ball will slip out from between the two metal points on the ring. __________________ For PHP/MySQL scripts ICQ 161480555 or email [email protected]

11-16-2004, 11:02 AM	#37
woodman Confirmed User Join Date: Jan 2003 Posts: 433	Come on guys it's so simple. All you need are pliers and a set of thirty weigh ball bearings. The trick is to make sure you prepare the Fetzer valve with some 3-in-1 oil and some gauze pads.

11-16-2004, 11:07 AM	#39
Extreme Holly Confirmed User Join Date: Aug 2004 Location: Scottsdale, AZ Posts: 444	this thread makes me queasy __________________ Promote me, Blowjob Races and Sexy Solo Sluts! Hundreds of hosted galleries, 15% referral, no fees...

11-16-2004, 11:11 AM	#40
Basic_man Programming King Pin Industry Role: Join Date: Oct 2003 Location: Montreal Posts: 27,360	Put some vasoline, maybe it will help.. __________________ UUGallery Builder - automated photo/video gallery plugin for Wordpress! Stop looking! Checkout Naked Hosting, online since 1999 !

11-16-2004, 11:38 AM	#43
Peaches Old broad Join Date: Oct 2002 Location: Away Posts: 13,933	Where did RRRed go??!!

11-16-2004, 11:48 AM	#44
LeeNoga Confirmed User Join Date: Jul 2001 Location: Egg & Sperm Mutation Posts: 3,043	Lee [not the same person as Euro Lee] fast forwards to the end of this movie, and waiting for the ending... Ya get that pipe out RRRED? If it were me I would have cut the metal.

11-16-2004, 02:55 PM	#45
RRRED Confirmed User Join Date: Jan 2001 Location: WA Posts: 6,754	OK I got it out! I took a pair of medical scissors with little short blades... then I grabbed a kotex pantyliner and cut a strip off about a half a millimeter thin... cut that in half and wrapped it around the blades (the sticky back was useful and the top was cushiony for stability ha) ... Then I shoved the blades up and opened them as hard as I could and got it to give just a smidge.. then took them out and pushed the ball out as hard as i could! Plink right down the drain though but thats ok. Now it's got a nicer little wire with a pink sparkly ball... much more my style... THE END Thanks for the advice guys really..

11-16-2004, 02:58 PM	#47
LeeNoga Confirmed User Join Date: Jul 2001 Location: Egg & Sperm Mutation Posts: 3,043	RRRED

11-16-2004, 02:59 PM	#48
sickkittens I am a meat popsicle. Join Date: Jul 2002 Posts: 25,100	This thread was worthless without at least some sort of nasty pic. __________________ HIGHEST PAYOUTS FOR NO-CONSOLE TOURS IN THE ENTIRE INDUSTRY! THIS SIG CAN BE YOURS FOR $200 - ICQ: 78881543

11-16-2004, 03:11 PM	#49
The Heron Confirmed User Industry Role: Join Date: Apr 2001 Location: Michigan Posts: 4,488	Go get a shotgun, have someone point it at the piercing and shoot it off! I am sure it will eliminate this problem and with any luck you have not bred yet.