Bootup question for any XP experts in here. - GoFuckYourself.com

KRL · 03-22-2004, 02:06 PM

On one of the new PC's I just got for our offices, after it completes the boot up to the operating system start to load part it just goes black screen on the first attempt. If you hit the reset button it completes the first part of the boot process and then Windows XP starts to load like it should.

For some reason its not going into the operating systeme bootup until the 2nd reset then everything goes fine into the startup.

Any thoughts what that could be. I'm thinking maybe a switch on the motherboard is set for the CPU to go into overclocking mode, but the AMD 2500 in there isn't showing as being overclocked when I checked the CPU speed.

Anything else??

twistyneck · 03-22-2004, 02:07 PM

http://www.apple.com/switch

- Jesus Christ - · 03-22-2004, 02:10 PM

Quote:

Originally posted by twistyneck
http://www.apple.com/switch

Gay

Do you get the windows loader screen (the one with the blue scrolling bar) or what... Knowing exactly where its freezing is important.

twistyneck · 03-22-2004, 02:19 PM

Quote:

Originally posted by - Jesus Christ -
Gay

Do you get the windows loader screen (the one with the blue scrolling bar) or what... Knowing exactly where its freezing is important.

Fuck you. It would solve 99.999% of his computer problems.

- Jesus Christ - · 03-22-2004, 02:26 PM

Quote:

Originally posted by twistyneck

Fuck you. It would solve 99.999% of his computer problems.

Yea beacsue he wouldnt be abble to do 99.999% of the stuff he can do now...

KRL

First goto your \windows\prefetch\ DIR and DEL EVERYTHING in it.
then reboot.

ANother thing to try....

uninstall your graphics card drivers.
then run the regvac trial in novice mode (just click clean registry)

http://www.softcities.com/download.a...om/regvacz.exe

Then reinstall your graphics drivers.

IF its freezing right before or jsut immediatly after the boot logo comes up it could be drivers or a prefetch problem.

BigVlad · 03-22-2004, 03:13 PM

Quote:

Originally posted by KRL
On one of the new PC's I just got for our offices, after it completes the boot up to the operating system start to load part it just goes black screen on the first attempt. If you hit the reset button it completes the first part of the boot process and then Windows XP starts to load like it should.

For some reason its not going into the operating systeme bootup until the 2nd reset then everything goes fine into the startup.

Any thoughts what that could be. I'm thinking maybe a switch on the motherboard is set for the CPU to go into overclocking mode, but the AMD 2500 in there isn't showing as being overclocked when I checked the CPU speed.

Anything else??

Hi KRL , it's matter of your DDR memory , you might having some conflict in the module , check if they installed correctly (we are talking about dual ddr , right ? ) , and try change their slots. it's should solve the problem , best of luck.

KRL · 03-22-2004, 05:57 PM

Thanks, I'll check both of those suggestions. It might be the dual DDR memory sticks cause there is a motherboard swithc on that ASUS board for that and I bet when they were being assembled by my tech he forgot to set that.

SoundMan · 03-22-2004, 06:29 PM

if all else fails try below :

KMR Stitch · 03-22-2004, 06:29 PM

Quote:

Originally posted by KRL
Thanks, I'll check both of those suggestions. It might be the dual DDR memory sticks cause there is a motherboard swithc on that ASUS board for that and I bet when they were being assembled by my tech he forgot to set that.

I had that same problem

Check the DDR Chips Try only 1 then the other then check the video card..
If it keeps doing that You need to get another motherboard..

It's shorting something...

I threw away my 266 biostar because it was fucking up.

I switched to a ASUS A7VN8X-DX

Works flawless!

03-22-2004, 02:06 PM	#1
KRL Entrepreneur Join Date: Oct 2002 Location: USA Posts: 31,429	Bootup question for any XP experts in here. On one of the new PC's I just got for our offices, after it completes the boot up to the operating system start to load part it just goes black screen on the first attempt. If you hit the reset button it completes the first part of the boot process and then Windows XP starts to load like it should. For some reason its not going into the operating systeme bootup until the 2nd reset then everything goes fine into the startup. Any thoughts what that could be. I'm thinking maybe a switch on the motherboard is set for the CPU to go into overclocking mode, but the AMD 2500 in there isn't showing as being overclocked when I checked the CPU speed. Anything else?? __________________ If you would like to develop your domains, you can lease inexpensive foreign labor from the leaders in the field at iWebmasters.com TO LOWER YOUR COSTS AND INCREASE YOUR PRODUCTION! * * * * * * * * * * * * Domains Adult News KRL's Newsletter Biz Tips Just Listed Domains

03-22-2004, 05:57 PM	#7
KRL Entrepreneur Join Date: Oct 2002 Location: USA Posts: 31,429	Thanks, I'll check both of those suggestions. It might be the dual DDR memory sticks cause there is a motherboard swithc on that ASUS board for that and I bet when they were being assembled by my tech he forgot to set that. __________________ If you would like to develop your domains, you can lease inexpensive foreign labor from the leaders in the field at iWebmasters.com TO LOWER YOUR COSTS AND INCREASE YOUR PRODUCTION! * * * * * * * * * * * * Domains Adult News KRL's Newsletter Biz Tips Just Listed Domains

03-22-2004, 02:07 PM	#2
twistyneck So Fucking Banned Join Date: Jan 2002 Location: Hanging by the neck until dead. Posts: 4,660	http://www.apple.com/switch

03-22-2004, 06:29 PM	#8
SoundMan So Fucking Banned Join Date: Nov 2003 Location: MidWest Posts: 3,471	if all else fails try below :