Fuck you Linksys - GoFuckYourself.com

01-04-2004, 09:54 PM

If they're going to make their products so you have to visit a website to set them up, then they should at least make sure the site is up all the time.

Can anyone else hit this address?

http://192.168.1.1/

I'm sure it will start working as soon as I go to bed, (or probably a few seconds after I post this.)

sexyclicks · 01-04-2004, 09:55 PM

thats your internal IP dawg

irishfury · 01-04-2004, 09:55 PM

that should be the router ip addy bro....

Babaganoosh · 01-04-2004, 09:55 PM

OH JESUS!!!!

This has got to be the most hilarious thread posted today.

01-04-2004, 09:57 PM

How is it my internal IP address if it says to log into that site on their support forum?

In case you haven't noticed, I know nothing about networking.

xxxoutsourcing · 01-04-2004, 09:57 PM

Quote:

Originally posted by evildick
If they're going to make their products so you have to visit a website to set them up, then they should at least make sure the site is up all the time.

Can anyone else hit this address?

http://192.168.1.1/

I'm sure it will start working as soon as I go to bed, (or probably a few seconds after I post this.)

It's an internal address man, they make fucking awsome equipment, normally is the user that fucks up!

xxxoutsourcing · 01-04-2004, 09:58 PM

Quote:

Originally posted by Armed & Hammered

OH JESUS!!!!

This has got to be the most hilarious thread posted today.

Babaganoosh · 01-04-2004, 09:58 PM

Just plug your modem into the WAN port, then your PC into one of the other ports. Just for giggles restart the router, modem and your PC (unless you know how to release/renew the IP). Then log in with "admin" and no password.

Oracle Porn · 01-04-2004, 09:58 PM

I don't find it funny. The man doesn't know computer's hardware so all the geeks laugh at him? wtf?

01-04-2004, 09:59 PM

Ahh, I understand now. So why would this not work all of a sudden?

Ic3m4nZ · 01-04-2004, 09:59 PM

irishfury · 01-04-2004, 10:00 PM

Quote:

Originally posted by evildick
How is it my internal IP address if it says to log into that site on their support forum?

In case you haven't noticed, I know nothing about networking.

its access to the router internal just like a cable modem you can log into the ip for that cable modem for instance ambit modmes are 192.168.100.3 you can log into them. make sure everything is plugged in proper and you should be able to log in fine.

Babaganoosh · 01-04-2004, 10:00 PM

Quote:

Originally posted by Oracle Porn
I don't find it funny. The man doesn't know computer's hardware so all the geeks laugh at him? wtf?

This is a board filled with geeks. We're all webmasters. It's not like this is a fucking cooking forum. We're all fairly computer literate here I would imagine. I'm just having fun, dipshit.

timboss · 01-04-2004, 10:01 PM

people live on this board to make fun of others ,
thats life

iwantchixx · 01-04-2004, 10:01 PM

Quote:

Originally posted by evildick
If they're going to make their products so you have to visit a website to set them up, then they should at least make sure the site is up all the time.

Can anyone else hit this address?

http://192.168.1.1/

I'm sure it will start working as soon as I go to bed, (or probably a few seconds after I post this.)

192.168.1.1 is the adress of YOUR ROUTER. If the page comes up blank you have not properly set up the network.

Open your internet connection properties.
Set your subnet mask to 255.255.255.0
Set your Ip to 192.168.1.101
Set default gateway to 192.168.1.1
Set your dns to your isp's dns numbers as normal.

If you have a dhcp based cable or dsl modem then release your ip.
Plug modem into router, plug router into pc all via network cables. No crossover cables needed.
Now turn on the router.

open browser and type in 192.168.1.1
Pass is admin
Tell it to dhcp renew.
Now configure router for static ip's on the 192.168.1.xxx block.

You now have internet access

01-04-2004, 10:01 PM

Quote:

Originally posted by Armed & Hammered
Just plug your modem into the WAN port, then your PC into one of the other ports. Just for giggles restart the router, modem and your PC (unless you know how to release/renew the IP). Then log in with "admin" and no password.

I've restarted a few times now and even unplugged the power cable.

I'll try it again right now.

Since all the networking geeks are here to laugh at me, stick around for a few minutes, maybe you can help me get this working.

Carrie · 01-04-2004, 10:01 PM

This is what is commonly known to previous tech-support people as an ID10T error.
The problem lies between the keyboard and the back of the chair.

READ THE FUCKING MANUAL.

Babaganoosh · 01-04-2004, 10:02 PM

Quote:

Originally posted by evildick

I've restarted a few times now and even unplugged the power cable.

I'll try it again right now.

Since all the networking geeks are here to laugh at me, stick around for a few minutes, maybe you can help me get this working.

Hit me up, I'll give you a hand.

Rorschach · 01-04-2004, 10:03 PM

bwhahahahahahahahahaha cheers I needed a laugh!

I actually thought you were joking at first.

Carrie · 01-04-2004, 10:04 PM

Quote:

Originally posted by timboss
people live on this board to make fun of others ,
thats life

There's a difference between making fun of someone and slapping someone upside the head who obviously hasn't read the instructions, followed them carefully, and then posts a flaming bashfest on the manufacturer as if it's their fault.

TDJ · 01-04-2004, 10:04 PM

Here ya go... In order: (ASSUMING XP)

1. Plug your ethernet cable from your computer into your linksys on #1-4 ports (any of them is fine)
2. Plug IN your linksys router and your computer (power is good)
3. Start / Control Panel / Network Connections - right click on your LAN connection, click properties. Click TCP/IP, click properties. Make sure Obtain an IP Address automatically is set. Make sure Obtain DNS ... is set. Click OK.
4. Reboot if it doesnt work right away.

Report back if that fails to give you your linksys menu.

irishfury · 01-04-2004, 10:04 PM

make sure you also change user and pass all sys routers have same user and pass by default...any question ask away

iwantchixx · 01-04-2004, 10:04 PM

if you still have problems, call linksys. Their tech support is FAST.

01-04-2004, 10:05 PM

Just for the record, I don't even have highspeed access here, I've never used a cable modem or DSL in my life because I can't get it where I live, so I have no modem hooked into this router.

I just wanted to set this up so I can share files from my laptop to my other PC, plus I want to use the linksys wireless cams when I build my new house this year for a security system.

Babaganoosh · 01-04-2004, 10:05 PM

Quote:

Originally posted by timboss
people live on this board to make fun of others ,
thats life

I got a kick out of your thread where you asked for someone to name ALL TGPs so you could submit to them. May I make fun of you here in case I forget to revisit that gem of a thread?

iwantchixx · 01-04-2004, 10:05 PM

Quote:

Originally posted by TDJ
Here ya go... In order: (ASSUMING XP)

1. Plug your ethernet cable from your computer into your linksys on #1-4 ports (any of them is fine)
2. Plug IN your linksys router and your computer (power is good)
3. Start / Control Panel / Network Connections - right click on your LAN connection, click properties. Click TCP/IP, click properties. Make sure Obtain an IP Address automatically is set. Make sure Obtain DNS ... is set. Click OK.
4. Reboot if it doesnt work right away.

Report back if that fails to give you your linksys menu.

That works too, but the second he wants to play with port forwarding he'll wish he went static

01-04-2004, 10:07 PM

Quote:

Originally posted by Carrie
This is what is commonly known to previous tech-support people as an ID10T error.
The problem lies between the keyboard and the back of the chair.

READ THE FUCKING MANUAL.

I did read the manual, and I had it working at one point, but I upgraded the firmware which seemed to work fine. Then I started fucking around with some other shit and I obviously messed something up.

nofx · 01-04-2004, 10:07 PM

packet 127.0.0.1

TDJ · 01-04-2004, 10:07 PM

Totally depends whether he has multiple people on it. But good point. Its easy enough to change later once its up and running.

iwantchixx · 01-04-2004, 10:07 PM

Quote:

Originally posted by evildick
Just for the record, I don't even have highspeed access here, I've never used a cable modem or DSL in my life because I can't get it where I live, so I have no modem hooked into this router.

I just wanted to set this up so I can share files from my laptop to my other PC, plus I want to use the linksys wireless cams when I build my new house this year for a security system.

You basicaly want to use it as a switch then. It should owrk right out of the box then and not even need to access any admin features.

stocktrader23 · 01-04-2004, 10:08 PM

Quote:

Originally posted by evildick
Just for the record, I don't even have highspeed access here, I've never used a cable modem or DSL in my life because I can't get it where I live, so I have no modem hooked into this router.

I just wanted to set this up so I can share files from my laptop to my other PC, plus I want to use the linksys wireless cams when I build my new house this year for a security system.

My Linksys came with an install CD also. Main computer, secondary pc's....You have one of those? It sets properties for you.

iwantchixx · 01-04-2004, 10:08 PM

Quote:

Originally posted by evildick

I did read the manual, and I had it working at one point, but I upgraded the firmware which seemed to work fine. Then I started fucking around with some other shit and I obviously messed something up.

I was about to suggest updating it.. too late now

I'm using the updated firmware myself and love it.

01-04-2004, 10:15 PM

So since I am not hooking this into cable or DSL, I guess it doesn't matter what I choose for "Internet Connection Type" on the setup page?

automatic config - DHCP
or
Static IP, etc.

01-04-2004, 10:18 PM

Quote:

Originally posted by iwantchixx

You basicaly want to use it as a switch then. It should owrk right out of the box then and not even need to access any admin features.

I have a wireless g card in my laptop. So I need to access the admin features to setup security features, right?

iwantchixx · 01-04-2004, 10:19 PM

Quote:

Originally posted by evildick
So since I am not hooking this into cable or DSL, I guess it doesn't matter what I choose for "Internet Connection Type" on the setup page?

automatic config - DHCP
or
Static IP, etc.

Yeah you can go dhcp. But if you want to limit access to other computers/hardware on the netwok static makes it easier.

AWC · 01-04-2004, 10:22 PM

are you blonde?

iwantchixx · 01-04-2004, 10:28 PM

Evil.... Do you have an ICQ number I can contact you with? I want to discuss something about sponsorhostedgalleries.com

01-04-2004, 10:29 PM

Quote:

Originally posted by AWC
are you blonde?

Only my ass hairs. You fuckers act like everyone is born with a router stuck up their butt. This is the first time I have ever used one in case you haven't noticed.

EscortBiz · 01-04-2004, 10:31 PM

anyone can now access your entire harddrive

AlienQ - BANNED FOR LIFE · 01-04-2004, 10:31 PM

I thought everyone had a router in there ass by now.
Humm...

01-04-2004, 10:35 PM

Quote:

Originally posted by iwantchixx
Evil.... Do you have an ICQ number I can contact you with? I want to discuss something about sponsorhostedgalleries.com

Sure. I'll turn it on right now.

314406940

And now that I have it working, will one of you smart people tell me the simplest way I can share my 56k modem connection that is on this computer with my laptop? I had it working before I upgraded the firmware but I really don't know how. (It's the blonde ass hairs showing through again.)

I want to be able to go take a dump while I make you all a "thank you" post on my laptop.

01-04-2004, 10:36 PM

Quote:

Originally posted by EscortBiz
anyone can now access your entire harddrive

Stay out of my gay porn folders.

BoNgHiTtA · 01-04-2004, 10:47 PM

Quote:

Originally posted by evildick
If they're going to make their products so you have to visit a website to set them up, then they should at least make sure the site is up all the time.

Can anyone else hit this address?

http://192.168.1.1/

I'm sure it will start working as soon as I go to bed, (or probably a few seconds after I post this.)

I am a bit late on this one, but you sir deserve this picture in your post.

iwantchixx · 01-04-2004, 10:51 PM

Quote:

Originally posted by evildick

Sure. I'll turn it on right now.

waiting reply

01-04-2004, 10:52 PM

Quote:

Originally posted by BoNgHiTtA

I am a bit late on this one, but you sir deserve this picture in your post.

Blah blah blah, like I said, first time I have ever laid hands on a router, never used a cable modem before, so I had no idea about internal IP addresses and such. I am in 56k land for at least another year.

01-04-2004, 11:42 PM

Quote:

Originally posted by Carrie
This is what is commonly known to previous tech-support people as an ID10T error.
The problem lies between the keyboard and the back of the chair.

READ THE FUCKING MANUAL.

...says the person who hasn't figured out how to hotlink their sig.

Strife · 01-04-2004, 11:46 PM

best laugh I've had in days

01-04-2004, 11:48 PM

Quote:

Originally posted by Strife
best laugh I've had in days

Guess you don't get out much.

Babaganoosh · 01-04-2004, 11:49 PM

Quote:

Originally posted by evildick

...says the person who hasn't figured out how to hotlink their sig.

haha owned

01-04-2004, 11:50 PM

Quote:

Originally posted by Armed & Hammered

haha owned

I had to get at least one jab in after this embarrassment!

01-04-2004, 09:55 PM	#3
irishfury Confirmed User Join Date: Aug 2003 Location: In the hearts of cowards Posts: 2,611	that should be the router ip addy bro.... __________________ Trust no one there all snakes

01-04-2004, 09:55 PM	#4
Babaganoosh ♥♥♥ Likes Hugs ♥♥♥ Industry Role: Join Date: Nov 2001 Location: /home Posts: 15,841	OH JESUS!!!! This has got to be the most hilarious thread posted today. __________________ I like pie.

01-04-2004, 09:58 PM	#8
Babaganoosh ♥♥♥ Likes Hugs ♥♥♥ Industry Role: Join Date: Nov 2001 Location: /home Posts: 15,841	Just plug your modem into the WAN port, then your PC into one of the other ports. Just for giggles restart the router, modem and your PC (unless you know how to release/renew the IP). Then log in with "admin" and no password. __________________ I like pie.

01-04-2004, 09:58 PM	#9
Oracle Porn Affiliate Industry Role: Join Date: Oct 2002 Location: Icq: 94-399-723 Posts: 24,433	I don't find it funny. The man doesn't know computer's hardware so all the geeks laugh at him? wtf? __________________

01-04-2004, 10:01 PM	#14
timboss Confirmed User Join Date: Sep 2003 Location: South Florida Posts: 627	people live on this board to make fun of others , thats life __________________ ICQ: 338637464

01-04-2004, 09:54 PM	#1
evildick Guest Posts: n/a	Fuck you Linksys If they're going to make their products so you have to visit a website to set them up, then they should at least make sure the site is up all the time. Can anyone else hit this address? http://192.168.1.1/ I'm sure it will start working as soon as I go to bed, (or probably a few seconds after I post this.)

01-04-2004, 09:55 PM	#2
sexyclicks Confirmed User Industry Role: Join Date: Mar 2002 Location: c9media.com Posts: 3,240	thats your internal IP dawg

01-04-2004, 09:57 PM	#5
evildick Guest Posts: n/a	How is it my internal IP address if it says to log into that site on their support forum? In case you haven't noticed, I know nothing about networking.

01-04-2004, 09:59 PM	#10
evildick Guest Posts: n/a	Ahh, I understand now. So why would this not work all of a sudden?

01-04-2004, 09:59 PM	#11
Ic3m4nZ Confirmed User Join Date: Aug 2003 Location: Montreal! Posts: 6,285

01-04-2004, 10:01 PM	#17
Carrie Confirmed User Join Date: Apr 2002 Location: Virgin - nee Posts: 3,162	This is what is commonly known to previous tech-support people as an ID10T error. The problem lies between the keyboard and the back of the chair. READ THE FUCKING MANUAL.

01-04-2004, 10:03 PM	#19
Rorschach So Fucking Banned Join Date: Aug 2002 Posts: 5,579	bwhahahahahahahahahaha cheers I needed a laugh! I actually thought you were joking at first.

01-04-2004, 10:04 PM	#21
TDJ Confirmed User Join Date: Nov 2003 Location: Ontario, CA Posts: 146	Here ya go... In order: (ASSUMING XP) 1. Plug your ethernet cable from your computer into your linksys on #1-4 ports (any of them is fine) 2. Plug IN your linksys router and your computer (power is good) 3. Start / Control Panel / Network Connections - right click on your LAN connection, click properties. Click TCP/IP, click properties. Make sure Obtain an IP Address automatically is set. Make sure Obtain DNS ... is set. Click OK. 4. Reboot if it doesnt work right away. Report back if that fails to give you your linksys menu.

01-04-2004, 10:04 PM	#23
iwantchixx Too lazy to set a custom title Industry Role: Join Date: Oct 2002 Location: The Boonies Posts: 12,860	if you still have problems, call linksys. Their tech support is FAST.

01-04-2004, 10:05 PM	#24
evildick Guest Posts: n/a	Just for the record, I don't even have highspeed access here, I've never used a cable modem or DSL in my life because I can't get it where I live, so I have no modem hooked into this router. I just wanted to set this up so I can share files from my laptop to my other PC, plus I want to use the linksys wireless cams when I build my new house this year for a security system.

01-04-2004, 10:07 PM	#28
nofx Too lazy to set a custom title Join Date: Nov 2002 Location: Virgin Mary's womb Posts: 16,826	packet 127.0.0.1 __________________ Often times I wonder why There's love and hate, theres live or die. When sickness comes I must decide: When feelings go, theres suicide.

01-04-2004, 10:15 PM	#33
evildick Guest Posts: n/a	So since I am not hooking this into cable or DSL, I guess it doesn't matter what I choose for "Internet Connection Type" on the setup page? automatic config - DHCP or Static IP, etc.

01-04-2004, 10:22 PM	#36
AWC Confirmed User Join Date: Aug 2001 Location: Bumfuck Posts: 1,223	are you blonde?

01-04-2004, 10:28 PM	#37
iwantchixx Too lazy to set a custom title Industry Role: Join Date: Oct 2002 Location: The Boonies Posts: 12,860	Evil.... Do you have an ICQ number I can contact you with? I want to discuss something about sponsorhostedgalleries.com

01-04-2004, 10:31 PM	#39
EscortBiz Fuck Checks, CASH only! Join Date: May 2002 Location: New York City Posts: 19,422	anyone can now access your entire harddrive __________________ Spanking, Medical Fetish, Sleeping, Strap-on Anal Lesbians, Girls Fucking Guys, Handjob site REAL HOT, Shemales, Anal and Ass Licking sites 100% Real EXCLUSIVE with amazing retention, ccbill payouts, lots of content FREE FTP HOSTING Promote the largest and oldest member paid escort site, Converts 10 times better then any dating site, CCBill payouts ICQ# 158802076

01-04-2004, 10:31 PM	#40
AlienQ - BANNED FOR LIFE best designer on GFY Join Date: Mar 2003 Location: IALIEN.COM - High Definition Video and Photographic Productions -ICQ 78943384 Posts: 30,307	I thought everyone had a router in there ass by now. Humm... __________________ NAKED HOSTING FTW!11 I'm On The INSANE PLAN $9.95/mo! \| The Alien Blog Adult News Worth Reading Updated Daily \| Content For Sale! 641 PICS 216 MINUTES OF VIDEO $350.00 \|ICQ: 78943384 \|

01-04-2004, 11:46 PM	#47
Strife Confirmed User Join Date: Aug 2001 Location: Canada Posts: 4,534	best laugh I've had in days __________________ Buy & Sell Ads on The Most Sexy Advertising Network on the Planet