How do you increase your YSlow Speed Score? - GoFuckYourself.com

vintageadult · 10-20-2017, 02:25 PM

The results: Link
You can see yslow score is below average. What do you suggest for us to increase this score?

P_RABID · 10-20-2017, 07:59 PM

What kind of server are you running, is it a dedicated, shared, cloud etc. This would give a better insight and a more helpful answer.

vintageadult · 10-20-2017, 10:04 PM

Quote:

Originally Posted by P_RABID

What kind of server are you running, is it a dedicated, shared, cloud etc. This would give a better insight and a more helpful answer.

Do you think its more about the server or cms script?
The server is shared.

3xmedia · 10-21-2017, 12:03 AM

It's a paysite? Why don't get a VPS at least? Are you broke? You can't expect any decent speed from that cheap Godaddy shared account

vintageadult · 10-21-2017, 12:21 AM

Quote:

Originally Posted by 3xmedia

It's a paysite? Why don't get a VPS at least? Are you broke? You can't expect any decent speed from that cheap Godaddy shared account

Which hosting would you suggest for VPS? What about abelohost? or mojo?

3xmedia · 10-21-2017, 12:27 AM

Quote:

Originally Posted by vintageadult

Which hosting would you suggest for VPS? What about abelohost? or mojo?

Mojo, Liquidweb, Hostdime, Hostwinds etc.

P_RABID · 10-21-2017, 05:53 AM

Mojo seems to be the way. Good Luck

hausarzt · 10-22-2017, 03:38 PM

Gtmetrix tells you where the problems are.

Do you really need 16 plugins? Every plugin slows down your site from a few milliseconds to seconds each!

Barry-xlovecam · 10-22-2017, 06:32 PM

I ran that test on a site I am "re"developing a back-end and revised responsive front end.

It did on the YSlow part find the 404 on the font directory (that I neglected to put on that server--OOPS!)

However, the page loaded in 1.52 sec before I fixed that 404 error(s) and 1.02 sec after (on GTmetrix's test for the record that site is on a small development VPS -- not busy at all now) -- and the fucking thing said that the site was slow -- WTF! Anyway, I haven't cleaned up the CSS not minimized it yet. Most of the content is on a CDN hotlinked I do not control so gzip compression would not matter.

That is the thing -- Wordpress is slow code to start with and using a shared server will always be shared resources.

Code:

barry@paragon-DS-7:~/$ curl 'http://www.vintagepornbay.com/' >re
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  274k    0  274k    0     0  67602      0 --:--:--  0:00:04 --:--:-- 69067
barry@paragon-DS-7:~/$ curl 'https://gtmetrix.com/reports/www.vintagepornbay.com/xVkH9ron' >re
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  264k  100  264k    0     0   216k      0  0:00:01  0:00:01 --:--:--  216

That is the HTML ONLY BTW.
Your server's response time is slow. maybe 2 or 3 seconds slow possibly the MySQL to load (populate) the wordpress content. I might try getting rid of the necessary plugins and see if that is part of the stall first.

"city": "Vancouver",
"region": "British Columbia",
"country": "CA",
"loc": "49.2866,-123.1158",
"org": "AS36483 Gossamer Threads Inc.",

you are at
"region": "Arizona",
"country": "US",
"loc": "33.6119,-111.8906",
"org": "AS26496 GoDaddy.com, LLC",

I am near Detroit -- much further away -- but on the same continent. <100ms

Well ... <5 sec is D maybe <3 sec B <2 sec A

vintageadult · 10-23-2017, 09:40 AM

Quote:

Originally Posted by 3xmedia

Mojo, Liquidweb, Hostdime, Hostwinds etc.

What about Knownhost?

vintageadult · 10-23-2017, 11:13 AM

Quote:

Originally Posted by Barry-xlovecam

I ran that test on a site I am "re"developing a back-end and revised responsive front end.

It did on the YSlow part find the 404 on the font directory (that I neglected to put on that server--OOPS!)

However, the page loaded in 1.52 sec before I fixed that 404 error(s) and 1.02 sec after (on GTmetrix's test for the record that site is on a small development VPS -- not busy at all now) -- and the fucking thing said that the site was slow -- WTF! Anyway, I haven't cleaned up the CSS not minimized it yet. Most of the content is on a CDN hotlinked I do not control so gzip compression would not matter.

That is the thing -- Wordpress is slow code to start with and using a shared server will always be shared resources.

Code:

barry@paragon-DS-7:~/$ curl 'http://www.vintagepornbay.com/' >re
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  274k    0  274k    0     0  67602      0 --:--:--  0:00:04 --:--:-- 69067
barry@paragon-DS-7:~/$ curl 'https://gtmetrix.com/reports/www.vintagepornbay.com/xVkH9ron' >re
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  264k  100  264k    0     0   216k      0  0:00:01  0:00:01 --:--:--  216

That is the HTML ONLY BTW.
Your server's response time is slow. maybe 2 or 3 seconds slow possibly the MySQL to load (populate) the wordpress content. I might try getting rid of the necessary plugins and see if that is part of the stall first.

"city": "Vancouver",
"region": "British Columbia",
"country": "CA",
"loc": "49.2866,-123.1158",
"org": "AS36483 Gossamer Threads Inc.",

you are at
"region": "Arizona",
"country": "US",
"loc": "33.6119,-111.8906",
"org": "AS26496 GoDaddy.com, LLC",

I am near Detroit -- much further away -- but on the same continent. <100ms

Well ... <5 sec is D maybe <3 sec B <2 sec A

Thanks!
So I want to get clearly understand: The problem is server or cms (plugins)? or both of them? So upgrading into vps would increase the speed? Do you think that? Or the only way is decreasing the plugins?

Barry-xlovecam · 10-23-2017, 11:38 AM

I would try to optimize the wordpress first, dump the unnecessary plugins then retest.

Then if still unsatisfied try a VPS. Depending on your experience level: managed, self-managed cpanel or go pro with ssh only for the best speed.

vintageadult · 10-30-2017, 08:24 AM

Quote:

Originally Posted by Barry-xlovecam

I would try to optimize the wordpress first, dump the unnecessary plugins then retest.

Then if still unsatisfied try a VPS. Depending on your experience level: managed, self-managed cpanel or go pro with ssh only for the best speed.

Registered for cloudflare however yslow still doesnt show cdn score.

Barry-xlovecam · 10-30-2017, 09:05 AM

Take off that overlay pop when you load the site (signup) -- see if the hesitation stops?

3xmedia · 10-30-2017, 10:37 AM

Quote:

Originally Posted by vintageadult

What about Knownhost?

they don't allow adult content.

vintageadult · 10-30-2017, 01:27 PM

Quote:

Originally Posted by Barry-xlovecam

Take off that overlay pop when you load the site (signup) -- see if the hesitation stops?

Its for Age verification and uk regulations

Barry-xlovecam · 10-30-2017, 03:35 PM

You should take it off so you know the overhead -- maybe there is some alternative way?

Maybe, the problem is in the loading order?

Pounding a square peg into a round hole will get you nowhere.

Another thing -- it is trivial to detect GEO- IP and only show that to your UK traffic (or other selected traffic) only.

vintageadult · 10-31-2017, 12:27 AM

Quote:

Originally Posted by Barry-xlovecam

You should take it off so you know the overhead -- maybe there is some alternative way?

Maybe, the problem is in the loading order?

Pounding a square peg into a round hole will get you nowhere.

Another thing -- it is trivial to detect GEO- IP and only show that to your UK traffic (or other selected traffic) only.

thats the hard part

Barry-xlovecam · 10-31-2017, 05:47 AM

PHP Code:


			
       $userip = getenv(GEOIP_COUNTRY_CODE);

Or use The Apache module

https://www.google.com/search?num=10...ip+detectio n

You have to program it.
The alternative is to make a .uk domain that has it ONLY.

Smart Fred · 11-01-2017, 06:35 AM

I still wonder if it's necessary.
I worked hard moving from a 85 to a 95 result on https://tools.pingdom.com/
It didn't help me getting better ranks on Google.
And on one site I've even lost a lot maybe be cause I've made too much changes to get the speed results.

Denny · 11-01-2017, 07:28 AM

Quote:

Originally Posted by Smart Fred

I still wonder if it's necessary.
I worked hard moving from a 85 to a 95 result on https://tools.pingdom.com/
It didn't help me getting better ranks on Google.
And on one site I've even lost a lot maybe be cause I've made too much changes to get the speed results.

Of course, it gave you no better ranking, if your site is way too slow, it can harm your ranking but I wouldn't expect any notable ranking boost just because you made your site loading faster a bit.

vintageadult · 11-02-2017, 01:32 AM

Gtmetrix currently doesnt work for me

Barry-xlovecam · 11-02-2017, 07:12 AM

Quote:

Originally Posted by vintageadult

Gtmetrix currently doesnt work for me

just worked for me

but they are full of shit IMHO

LOL 1.0 sec load time

but my page load speed is bad ??

vintageadult · 11-02-2017, 08:33 AM

Quote:

Originally Posted by barry-xlovecam

just worked for me

but they are full of shit imho

lol 1.0 sec load time

but my page load speed is bad ??

wtf? 1.0

hausarzt · 11-02-2017, 01:52 PM

Quote:

Originally Posted by Barry-xlovecam

just worked for me

but they are full of shit IMHO

LOL 1.0 sec load time

but my page load speed is bad ??

Right, this is slow.
For example, my site loads almost 20MB and loads in 3 seconds.
So if you compare data/load time, your site loads slow.

Barry-xlovecam · 11-02-2017, 02:21 PM

Whatever, I am quite satisfied and have absolutely no interest in loading 20MB web pages.

I am not video streaming -- that is just a hardware upgrade.

Anyway, wordpress is slow as fuck on a shared server like he is using. So, there is only so much he will be do. If a webpage doesn't start loading 1 or 2 seconds many people will leave.

So, loading 20MB in 3 seconds would be reasonable but not fast.

vintageadult · 11-02-2017, 10:04 PM

Quote:

Originally Posted by Barry-xlovecam

Whatever, I am quite satisfied and have absolutely no interest in loading 20MB web pages.

I am not video streaming -- that is just a hardware upgrade.

Anyway, wordpress is slow as fuck on a shared server like he is using. So, there is only so much he will be do. If a webpage doesn't start loading 1 or 2 seconds many people will leave.

So, loading 20MB in 3 seconds would be reasonable but not fast.

I think its not about server(shared vps) its more about wordpress and its optimizations.

magneto664 · 11-03-2017, 06:09 AM

Quote:

Originally Posted by vintageadult

The results: Link
You can see yslow score is below average. What do you suggest for us to increase this score?

1. use best cache plugin wp-rocket.
2. get a cdn and install on your site, from my side i can recommend a https://bunnycdn.com - hey allow adult content.

I move all my sites for this plugin and cdn
I get something like this on my sites:

DzMehedi · 11-03-2017, 06:45 AM

Hey Dude,
I'm a Web Site Optimization Specialist,
Come To Me, I'll Give You Good Recommendations
Skype: dzmehedi

magneto664 · 11-03-2017, 07:02 AM

Quote:

Originally Posted by DzMehedi

Hey Dude,
I'm a Web Site Optimization Specialist,
Come To Me, I'll Give You Good Recommendations
Skype: dzmehedi

To be clear, you are amazing seo specialist from india or bangladesh?

DzMehedi · 11-03-2017, 08:57 AM

Quote:

Originally Posted by magneto664

To be clear, you are amazing seo specialist from india or bangladesh?

Huh! ?..................

j3rkules · 11-03-2017, 11:05 AM

Quote:

Originally Posted by DzMehedi

Hey Dude,
I'm a Web Site Optimization Specialist,
Come To Me, I'll Give You Good Recommendations
Skype: dzmehedi

Sounds really interesting.

10-20-2017, 02:25 PM	#1
vintageadult Confirmed User Industry Role: Join Date: Jun 2015 Location: NL Posts: 361	How do you increase your YSlow Speed Score? The results: Link You can see yslow score is below average. What do you suggest for us to increase this score?

10-21-2017, 12:03 AM	#4
3xmedia Confirmed User Industry Role: Join Date: Apr 2004 Posts: 5,728	It's a paysite? Why don't get a VPS at least? Are you broke? You can't expect any decent speed from that cheap Godaddy shared account __________________ ---

10-22-2017, 03:38 PM	#8
hausarzt Confirmed User Industry Role: Join Date: Jan 2011 Location: Somewhere in Germany Posts: 817	Gtmetrix tells you where the problems are. Do you really need 16 plugins? Every plugin slows down your site from a few milliseconds to seconds each! __________________ I know, my english is bad. But your german might be even worse

10-22-2017, 06:32 PM	#9
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	I ran that test on a site I am "re"developing a back-end and revised responsive front end. It did on the YSlow part find the 404 on the font directory (that I neglected to put on that server--OOPS!) However, the page loaded in 1.52 sec before I fixed that 404 error(s) and 1.02 sec after (on GTmetrix's test for the record that site is on a small development VPS -- not busy at all now) -- and the fucking thing said that the site was slow -- WTF! Anyway, I haven't cleaned up the CSS not minimized it yet. Most of the content is on a CDN hotlinked I do not control so gzip compression would not matter. That is the thing -- Wordpress is slow code to start with and using a shared server will always be shared resources. Code: barry@paragon-DS-7:~/$ curl 'http://www.vintagepornbay.com/' >re % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 274k 0 274k 0 0 67602 0 --:--:-- 0:00:04 --:--:-- 69067 barry@paragon-DS-7:~/$ curl 'https://gtmetrix.com/reports/www.vintagepornbay.com/xVkH9ron' >re % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 264k 100 264k 0 0 216k 0 0:00:01 0:00:01 --:--:-- 216 That is the HTML ONLY BTW. Your server's response time is slow. maybe 2 or 3 seconds slow possibly the MySQL to load (populate) the wordpress content. I might try getting rid of the necessary plugins and see if that is part of the stall first. "city": "Vancouver", "region": "British Columbia", "country": "CA", "loc": "49.2866,-123.1158", "org": "AS36483 Gossamer Threads Inc.", you are at "region": "Arizona", "country": "US", "loc": "33.6119,-111.8906", "org": "AS26496 GoDaddy.com, LLC", I am near Detroit -- much further away -- but on the same continent. <100ms Well ... <5 sec is D maybe <3 sec B <2 sec A

10-31-2017, 05:47 AM	#19
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	PHP Code: `$userip = getenv(GEOIP_COUNTRY_CODE);` Or use The Apache module https://www.google.com/search?num=10...ip+detectio n You have to program it. The alternative is to make a .uk domain that has it ONLY.

10-20-2017, 07:59 PM	#2
P_RABID Confirmed User Industry Role: Join Date: Apr 2017 Posts: 514	What kind of server are you running, is it a dedicated, shared, cloud etc. This would give a better insight and a more helpful answer.

10-21-2017, 05:53 AM	#7
P_RABID Confirmed User Industry Role: Join Date: Apr 2017 Posts: 514	Mojo seems to be the way. Good Luck

10-23-2017, 11:38 AM	#12
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	I would try to optimize the wordpress first, dump the unnecessary plugins then retest. Then if still unsatisfied try a VPS. Depending on your experience level: managed, self-managed cpanel or go pro with ssh only for the best speed.

10-30-2017, 09:05 AM	#14
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	Take off that overlay pop when you load the site (signup) -- see if the hesitation stops?

10-30-2017, 03:35 PM	#17
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	You should take it off so you know the overhead -- maybe there is some alternative way? Maybe, the problem is in the loading order? Pounding a square peg into a round hole will get you nowhere. Another thing -- it is trivial to detect GEO- IP and only show that to your UK traffic (or other selected traffic) only.

11-01-2017, 06:35 AM	#20
Smart Fred Confirmed User Industry Role: Join Date: Mar 2008 Location: France Posts: 308	I still wonder if it's necessary. I worked hard moving from a 85 to a 95 result on https://tools.pingdom.com/ It didn't help me getting better ranks on Google. And on one site I've even lost a lot maybe be cause I've made too much changes to get the speed results. __________________ Stop doing what you like and start doing what brings you money!

11-02-2017, 01:32 AM	#22
vintageadult Confirmed User Industry Role: Join Date: Jun 2015 Location: NL Posts: 361	Gtmetrix currently doesnt work for me

11-02-2017, 02:21 PM	#26
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	Whatever, I am quite satisfied and have absolutely no interest in loading 20MB web pages. I am not video streaming -- that is just a hardware upgrade. Anyway, wordpress is slow as fuck on a shared server like he is using. So, there is only so much he will be do. If a webpage doesn't start loading 1 or 2 seconds many people will leave. So, loading 20MB in 3 seconds would be reasonable but not fast.

11-03-2017, 06:45 AM	#29
DzMehedi Registered User Industry Role: Join Date: Oct 2017 Posts: 2	Hey Dude, I'm a Web Site Optimization Specialist, Come To Me, I'll Give You Good Recommendations Skype: dzmehedi