Did I just totally ruin this board?
-
Your Paysite Partner
Strength In Numbers!
StickyDollars | RadicalCash | KennysPennies | HomegrownCash -
looks like it -
I can't even tell where you are talking about.Comment
-
Your Paysite Partner
Strength In Numbers!
StickyDollars | RadicalCash | KennysPennies | HomegrownCashComment
-
I have repairing circuit boards since the Navy
You had too much heat on your iron or just too big an iron
I have a little battery powered one I use now for things like that and it works greatCarbon is not the problem, it makes up 0.041% of our atmosphere , 95% of that is from Volcanos and decomposing plants and stuff. So people in the US are responsible for 13% of the carbon in the atmosphere which 95% is not from Humans, like cars and trucks and stuff and they want to spend trillions to fix it while Solar Panel plants are powered by coal plants
think about thatComment
-
Your Paysite Partner
Strength In Numbers!
StickyDollars | RadicalCash | KennysPennies | HomegrownCashComment
-
put some duct tape on it
hehehheComment
-
make sure to tin your iron tip. that board is fried amigo. your iron might be too much for such a tiny weld. i would advise an iron with only 30-40w power. and lead solder, not the safe shit that needs more heat.Comment
-
I'd just call that a challenge.. ;)
(jk, fuck that...)
What's fun to do is to take an N64, on the main center chip take a tiny soldering iron and unsolder pins 112 and 116, then solder those ends each to a wire running to any 3.3v sources. Then cut those wires and add two way switches. Then you have an N64 that runs at 1, 1.5, 2 or 3x clock speed and reund games better and sometimes increases draw distance...
Join the BEST cam affiliate program on the internet!
I've referred over $1.7mil in spending this past year, you should join in.
I make a lot more money in the medical field in a lab now, fuck you guys. Don't ask me to come back, but do join Chaturbate in my sig, it still makes bank without me touching shit for years..
Comment
-
you need a small tipped iron with a variable temperature setting and a magnifier for this kind of work, you should use a solder sucker to clean it up first and then some very fine emery cloth to finish cleaning it up then start again. I spent 12 years working on these kinda boards and they take a while to get the hang of.... if your not careful you can burn out some components with too much heat or damage the track but you can rebuild the track with some fine wire. use some flux to keep things clean.. its like micro surgery, you need a very steady hand and very little solder otherwise you can easily join two tracks together, have fun with it.
Scarlett Content - Adult Content Provider - High Quality Adult Stock Content for your Websites, Mobile Media and Print.
Over 3 Million Images (14,000 photo sets) over 5000 Videos - Many Niches, US-2257, Awesome Prices.
Over 40 years in the adult industry.
[email protected] Follow us on twitter.Comment
-
Hmm...I'll give it a go tomorrow on another older controller and see if I can get it without burning the whole board this time.
Your Paysite Partner
Strength In Numbers!
StickyDollars | RadicalCash | KennysPennies | HomegrownCashComment
-
-
Comment
-
Looks toasted
Blog Posts - Contextual Links - Hardlinks on 600+ Blog Network
* Handwritten * 180 C Class IPs * Permanent! * Many Niches! * Bulk Discounts! GFYPosts /at/ J2Media.netComment
-
Carbon is not the problem, it makes up 0.041% of our atmosphere , 95% of that is from Volcanos and decomposing plants and stuff. So people in the US are responsible for 13% of the carbon in the atmosphere which 95% is not from Humans, like cars and trucks and stuff and they want to spend trillions to fix it while Solar Panel plants are powered by coal plants
think about thatComment
-
you migh have had the same job asmy old man in the navy, only he was on a tender and fixed all the electronics for all the ships, was recently going through some photos and found an old navy newsletter for his outfit and in it were some pics of him at his station soldering. i found his soldering gun at a very young age and mucked up what was apparently, based on the whooping i got, a very expensive gun. hahah, good times.
anyhoo,, i've recently gotten back into it and am doing up my own wiring harnesses for guitars. not as intricate work as this, 22 gauge wire and pots, but coincidental eh!Comment
-
The pads for diode d22 are gone. Its doable but thats a video game controller right?Comment
-
Your Paysite Partner
Strength In Numbers!
StickyDollars | RadicalCash | KennysPennies | HomegrownCashComment
Comment