Why doesn't a processor use all its power when encoding something? - GoFuckYourself.com

Dirty F · 10-25-2012, 12:32 AM

Why does it only use 20% for example (instead of the full 100%) when decoding, encoding, encrypting something?
What does it depend on?

SmutHammer · 10-25-2012, 01:08 AM

I have wondered the same thing...

asscracker · 10-25-2012, 01:16 AM

go with PP

Paul&John · 10-25-2012, 01:21 AM

whats PP?

Dirty F · 10-25-2012, 01:23 AM

Quote:

Originally Posted by asscracker

go with PP

Pentium Processor??

k0nr4d · 10-25-2012, 01:31 AM

you can't use multithreading with every video codec

Dirty F · 10-25-2012, 01:34 AM

Quote:

Originally Posted by k0nr4d

you can't use multithreading with every video codec

Well, i'm not talking about a specific codec or operation. Is there a general reason why it uses a certain amount of cpu power when doing whatever?

mattyboy · 10-25-2012, 01:37 AM

Premier CS6 with an approved graphics card by Adobe will use all proccessing power on certain codecs (h264 included).
With an Ivy Bridge proccessor and SSD drives, encodes now fly.

CS6 has been Adobes best release i think since cs3.

Dirty F · 10-25-2012, 01:43 AM

Ok, i'm not sure how to explain this any better.
I'm talking about processor use in general. Sorry about the topic title. Ignore it.
Why does a processor use certain amounts of cpu power whenever doing something that could use more.

notjoe · 10-25-2012, 02:15 AM

Multiple reasons.
1) The process is waiting for other resources to free up and therefore cannot go full speed.
2) The codec you're encoding in to doesn't support multiple processors (cores on a processor). For example, you have a CPU with 4 cores. The codec your encoding does not support SMP. You'll only encode using a single core (or 25% of the overall CPU power).

Dirty F · 10-25-2012, 02:49 AM

Quote:

Originally Posted by notjoe

Multiple reasons.
1) The process is waiting for other resources to free up and therefore cannot go full speed.
2) The codec you're encoding in to doesn't support multiple processors (cores on a processor). For example, you have a CPU with 4 cores. The codec your encoding does not support SMP. You'll only encode using a single core (or 25% of the overall CPU power).

1: it's using nothing else.
2: PLEASE forget about the codec. This isn't about a codec. Just processor use in general.

notjoe · 10-25-2012, 02:51 AM

Quote:

Originally Posted by Dirty F

1: it's using nothing else.
2: PLEASE forget about the codec. This isn't about a codec. Just processor use in general.

Then the app isn't built for SMP and will use only a single core of the processor. Also, it might just not need to use all the cpu power.

Dirty F · 10-25-2012, 02:52 AM

Quote:

Originally Posted by notjoe

Then the app isn't built for SMP and will use only a single core of the processor. Also, it might just not need to use all the cpu power.

So everything that needs cpu power in whatever way needs to be built so it can be run on more than 1 core? Am i saying that right?

sandman! · 10-25-2012, 02:53 AM

yesssssssssssssssssss

Quote:

Originally Posted by Dirty F

So everything that needs cpu power in whatever way needs to be built so it can be run on more than 1 core? Am i saying that right?

Dirty F · 10-25-2012, 03:14 AM

Quote:

Originally Posted by sandman!

yesssssssssssssssssss

Thanks. Makes sense.

Grapesoda · 10-25-2012, 04:54 AM

Quote:

Originally Posted by Dirty F

Ok, i'm not sure how to explain this any better.
I'm talking about processor use in general. Sorry about the topic title. Ignore it.
Why does a processor use certain amounts of cpu power whenever doing something that could use more.

look at the priority of the process... open the task manager, look at the processes and reset the priority on the encoding... BUT not much else will run if you do

Grapesoda · 10-25-2012, 04:55 AM

Quote:

Originally Posted by Dirty F

So everything that needs cpu power in whatever way needs to be built so it can be run on more than 1 core? Am i saying that right?

yes that is the way it works I think. maybe not http://www.sevenforums.com/hardware-...-like-osx.html

seeandsee · 10-25-2012, 05:02 AM

Quote:

Originally Posted by Grapesoda

look at the priority of the process... open the task manager, look at the processes and reset the priority on the encoding... BUT not much else will run if you do

No encoding on his end

Konda · 10-25-2012, 05:15 AM

In the past when I was still on Windows I remember when I was encoding I couldn't use my computer for anything else, like opening the browser would take a minute when it was encoding. And I remember the same on Unix when I had some tube script, when I pressed encoding it used all the CPU and the whole site became unreachable. So there seem to be apps that do use the full CPU.

MetaMan · 10-25-2012, 05:19 AM

Try PayPal or CCBill.

Major (Tom) · 10-25-2012, 08:13 AM

yea i hate that too.
ds

10-25-2012, 12:32 AM	#1
Dirty F Too lazy to set a custom title Industry Role: Join Date: Jul 2001 Posts: 59,204	Why doesn't a processor use all its power when encoding something? Why does it only use 20% for example (instead of the full 100%) when decoding, encoding, encrypting something? What does it depend on?

10-25-2012, 01:21 AM	#4
Paul&John Confirmed User Industry Role: Join Date: Aug 2005 Location: YUROP Posts: 8,620	whats PP? __________________ Use coupon 'pauljohn' for a $1 discount at already super cheap NameSilo! Anal Webcams \| Kinky Trans Cams Live \| Hotwife XXX Tube \| Get your Proxies here

10-25-2012, 01:31 AM	#6
k0nr4d Confirmed User Industry Role: Join Date: Aug 2006 Location: Poland Posts: 9,227	you can't use multithreading with every video codec __________________ Mechanical Bunny Media Mechbunny Tube Script \| Mechbunny Webcam Aggregator Script \| Custom Web Development

10-25-2012, 08:13 AM	#21
Major (Tom) White Pride Industry Role: Join Date: Nov 2003 Location: Null Posts: 31,256	yea i hate that too. ds __________________ WHITE LIVES MATTER

10-25-2012, 01:08 AM	#2
SmutHammer Confirmed User Industry Role: Join Date: Mar 2008 Posts: 4,266	I have wondered the same thing...

10-25-2012, 01:16 AM	#3
asscracker So Fucking Banned Industry Role: Join Date: Oct 2012 Posts: 64	go with PP

10-25-2012, 01:37 AM	#8
mattyboy Confirmed User Industry Role: Join Date: Apr 2003 Posts: 1,070	Premier CS6 with an approved graphics card by Adobe will use all proccessing power on certain codecs (h264 included). With an Ivy Bridge proccessor and SSD drives, encodes now fly. CS6 has been Adobes best release i think since cs3.

10-25-2012, 01:43 AM	#9
Dirty F Too lazy to set a custom title Industry Role: Join Date: Jul 2001 Posts: 59,204	Ok, i'm not sure how to explain this any better. I'm talking about processor use in general. Sorry about the topic title. Ignore it. Why does a processor use certain amounts of cpu power whenever doing something that could use more.

10-25-2012, 02:15 AM	#10
notjoe Confirmed User Industry Role: Join Date: May 2002 Location: Toronto, Canada Posts: 5,599	Multiple reasons. 1) The process is waiting for other resources to free up and therefore cannot go full speed. 2) The codec you're encoding in to doesn't support multiple processors (cores on a processor). For example, you have a CPU with 4 cores. The codec your encoding does not support SMP. You'll only encode using a single core (or 25% of the overall CPU power).

10-25-2012, 05:15 AM	#19
Konda ... Industry Role: Join Date: Apr 2003 Posts: 2,280	In the past when I was still on Windows I remember when I was encoding I couldn't use my computer for anything else, like opening the browser would take a minute when it was encoding. And I remember the same on Unix when I had some tube script, when I pressed encoding it used all the CPU and the whole site became unreachable. So there seem to be apps that do use the full CPU.

10-25-2012, 05:19 AM	#20
MetaMan I AM WEB 2.0 Industry Role: Join Date: Jan 2003 Posts: 28,682	Try PayPal or CCBill.