Car junkies ... I got a question - GoFuckYourself.com - Adult Webmaster Forum

X

Chris

Too lazy to set a custom title

Join Date: May 2003

Posts: 27880
Share

Post
#1

Car junkies ... I got a question

03-13-2005, 12:11 PM

I havea 99 Honda civic dx coupe
and when i press the breaks it sounds like metal on metal

my brakes are not working any less than before

I was told it could be a little metal thing telling me i need to get my brake pads replaced

BUT i was also told that it is the rotors (spelling ) grinding against my breaks... but if that was the case wouldn't the brakes not work as well?

they stop on a dime still just sounds horrid

I don't wanna take it ina nd find out it will cost me 100000 to fix if it is something other than just replacing break pads

I hate going in cuz my car is lowered and it does not have a camber kit on it so the tires lean in and they hate it and tell me ineed to get it fixed cuz it eats my tires like every 50k miles
but i left camber kit off on purpose as I like the way it makes the tires look

but anyways

anyone help me with my question?

[email protected]
Tags: None
Illicit

wtf ?

Join Date: Dec 2003

Posts: 11895
Share

Post
#2

03-13-2005, 12:16 PM

you need pads and maybe rotors by now...

It shouldnt cost too much... I had cross drilled rotors put on my car and it only cost $50 each, and pads were another $30 and the shop wanted $50 labor

Get a camber kit... your fucking up your tires big time... I ruined my 20" Toyo's like that... expen$ive

Insert Sig Here
Comment
Furious_Male

Doing the grind since 99

Join Date: Oct 2003

Posts: 16884
Share

Post
#3

03-13-2005, 12:16 PM

Metal against metal sounds is exactly that. Your pads are worn down and the metal part of the pad is beating the hell out of the rotor.

Sure it may still stop well because you do have 4 brakes. Perhaps the rears are doing most of the work now.

The longer you wait the worst things will be. If you went in when you first heard it you may have gotten away with just having the rotors turned and new pads put on. At this point you will probably need new rotors as well.

Living in Virtual Reality
Contact: Email (preferred): furiousmale .at. gmail - Skype: live:shanedws
Comment
Chris

Too lazy to set a custom title

Join Date: May 2003

Posts: 27880
Share

Post
#4

03-13-2005, 12:22 PM

ughh
hopefully the rotors are still fine
or fine enough for a lil bit longer and just can get away with the pads

[email protected]
Comment
Furious_Male

Doing the grind since 99

Join Date: Oct 2003

Posts: 16884
Share

Post
#5

03-13-2005, 12:32 PM

Originally posted by JupZChris

ughh
hopefully the rotors are still fine
or fine enough for a lil bit longer and just can get away with the pads

Well unless you are super strapped for cash it shouldn't be a big deal either way. The rotors aren't that expensive.

If the budget is tight you can throw a set of pads on there yourself (provided the rotors arent broken down to nothing). They will get chewed up pretty fast but depending on how much you drive could last you a month or 2. I have a cheap friend that does that all the time. The problem is by the time you get to your second or third set of pads it would have been more cost effective to get it done right the first time.

Living in Virtual Reality
Contact: Email (preferred): furiousmale .at. gmail - Skype: live:shanedws
Comment
Chris

Too lazy to set a custom title

Join Date: May 2003

Posts: 27880
Share

Post
#6

03-13-2005, 12:38 PM

Originally posted by Furious_Male

Well unless you are super strapped for cash it shouldn't be a big deal either way. The rotors aren't that expensive.

If the budget is tight you can throw a set of pads on there yourself (provided the rotors arent broken down to nothing). They will get chewed up pretty fast but depending on how much you drive could last you a month or 2. I have a cheap friend that does that all the time. The problem is by the time you get to your second or third set of pads it would have been more cost effective to get it done right the first time.

right now aint the best time for me to blow a few hundred
just had a baby
so in like a monthi can afford rotors

this has only been going on for like two weeks max
hopefully they are not that bad

in chat they also told me that it could be junk stuck in there as I do havea large gravel driveway

[email protected]
Comment
Morgan

Too lazy to set a custom title

Join Date: May 2002

Posts: 10520
Share

Post
#7

03-13-2005, 12:39 PM

Originally posted by JupZChris

right now aint the best time for me to blow a few hundred
just had a baby
so in like a monthi can afford rotors

this has only been going on for like two weeks max
hopefully they are not that bad

in chat they also told me that it could be junk stuck in there as I do havea large gravel driveway

would you rather not be able to stop and your baby get injured?

PornstarPlatinum.com | TransErotica.com
Comment
Chris

Too lazy to set a custom title

Join Date: May 2003

Posts: 27880
Share

Post
#8

03-13-2005, 12:40 PM

Originally posted by Ganjasaurus

would you rather not be able to stop and your baby get injured?

umm ... i knew I comment like this would come along
from what I am being told here and in irc that i can get the new pads and be fine forl ike two months ... the car stops PERFECTLY still

[email protected]
Comment
smack

Push Porn Like Weight.

Join Date: Mar 2002

Posts: 10652
Share

Post
#9

03-13-2005, 12:43 PM

it should only be like 100 bucks to get new rotors and pads put in. it is reccomended because the stopping opwer will degrade and if the brakes get wet they will be like a fat man on a slip and slide.

Cry havoc and let slip the dogs of war.
Comment
Chris

Too lazy to set a custom title

Join Date: May 2003

Posts: 27880
Share

Post
#10

03-13-2005, 12:47 PM

Originally posted by smack

it should only be like 100 bucks to get new rotors and pads put in. it is reccomended because the stopping opwer will degrade and if the brakes get wet they will be like a fat man on a slip and slide.

hahahahah @ the fat man analogy

[email protected]
Comment
Furious_Male

Doing the grind since 99

Join Date: Oct 2003

Posts: 16884
Share

Post
#11

03-13-2005, 12:49 PM

Originally posted by JupZChris

right now aint the best time for me to blow a few hundred
just had a baby
so in like a monthi can afford rotors

this has only been going on for like two weeks max
hopefully they are not that bad

in chat they also told me that it could be junk stuck in there as I do havea large gravel driveway

Yea small chance there could be shit in there but I doubt it. If it is a stone its probably damaging your rotor anyway. You can usualy tell. Without driving the car I couldnt tell you but it looks like either way you have to take it in.

Living in Virtual Reality
Contact: Email (preferred): furiousmale .at. gmail - Skype: live:shanedws
Comment
jeffrey

Confirmed User

Join Date: Jul 2004

Posts: 1864
Share

Post
#12

03-13-2005, 12:57 PM

if you can offord it in a month then throw it on credit.

brakes are an important part of the car, as are tires, but you dont care about them either.

FYI, you cna pay 80 to have the pads changed now, and hten 120 to get the pads and rotors changed again in a month or two, or jsut suck it up and get them both done now and save yourself some money, cause you would have to have one shitty ass card to not save money even if you couldnt pay the balance in 2 months.

Coming Soon!
Comment
spideriux

Registered User

Join Date: Feb 2005

Posts: 17227
Share

Post
#13

03-13-2005, 01:05 PM

this thread sucks without pics

FreeOnes
Comment
Morgan

Too lazy to set a custom title

Join Date: May 2002

Posts: 10520
Share

Post
#14

03-13-2005, 03:00 PM

Originally posted by JupZChris

umm ... i knew I comment like this would come along
from what I am being told here and in irc that i can get the new pads and be fine forl ike two months ... the car stops PERFECTLY still

i know. it is going to be a lot cheaper to replace your pads than it will be to re surface your rotors. better not to wait.

PornstarPlatinum.com | TransErotica.com
Comment
dready

Confirmed User

Join Date: Oct 2002

Posts: 5247
Share

Post
#15

03-13-2005, 03:03 PM

If you wait you're going to need rotors as well as pads.

ICQ: 91139591
Comment
iwantchixx

Too lazy to set a custom title

Join Date: Oct 2002

Posts: 12860
Share

Post
#16

03-13-2005, 03:08 PM

If you can put it on a credit card get your rotors machined and new pads now. You may have lots of stopping power now but that will wear away VERY quickly. I give it a week before you have the stopping power of those old 10 speed era hard rubber pads

Just replacing the pads will do for a while but if you are an aggresive driver you may only get a couple weeks out of them depending on how worn the rotors are.
Comment
Chris

Too lazy to set a custom title

Join Date: May 2003

Posts: 27880
Share

Post
#17

03-13-2005, 03:09 PM

Originally posted by iwantchixx

If you can put it on a credit card get your rotors machined and new pads now. You may have lots of stopping power now but that will wear away VERY quickly. I give it a week before you have the stopping power of those old 10 speed era hard rubber pads

Just replacing the pads will do for a while but if you are an aggresive driver you may only get a couple weeks out of them depending on how worn the rotors are.

we dont drive much and I do not have a credit card
i am a cash only man lol

[email protected]
Comment
Veterans Day

Confirmed User

Join Date: Jul 2003

Posts: 8403
Share

Post
#18

03-13-2005, 03:34 PM

if you say stopping power is the same as always, then its gonna be the pad indicators telling you they are getting to the point of replacement. Take 1 tire off run your finger along the rotor, front and back. That will tell you right away. Im willing to bet its the pad indicator, which is nothing more than a small metal tab that touches the rotor while depressing the brakes, thus if its touching while braking thats telling you the pads are below what the manufacturer recommends. Elementary my dear watson

Build a Massive Traffic Network, Hands FREE, Totally Automated
Comment
SaintElGrouch

Confirmed User

Join Date: Jan 2005

Posts: 307
Share

Post
#19

03-13-2005, 03:45 PM

I just replaced the rotors and brake pads on my Honda, and the parts only ran me about 75 bucks. I thought it would be difficult to replace the rotors myself but it really wasn't. For what it's worth I can walk you through it if you want to try it yourself.

I still haven't bought a camber kit for my car either and IMO I don't see that much difference to my tire wear because of it.
Comment
Spunky

I need a beer

Join Date: Jun 2002

Posts: 133978
Share

Post
#20

03-13-2005, 03:52 PM

Could be a caliper seizing ,I would get that looked at pretty quick

YOUR INFORMATION HERE
Comment

Previous template Next

Working...