|
It is very hard to install/setup RAID5 on a working server.
In my experience its really only possible during the setup part.
Sounds like something fishy is going on - the easiest way to check is do:
dmesg | grep -i raid
It should show something like:
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
Vendor: MegaRAID Model: LD 0 RAID1 69G Rev: 516A
This is a RAID1 (mirror) system
__________________
Managed US/ NL Hosting [ [Reality Check Network ]
Dell XEON Servers + 1/2/3 TB Packages ICQ: 4-930-562
|