Please help me with my monitor display problems - GoFuckYourself.com

Mr. Mike · 01-18-2007, 06:12 PM

So I finally upgraded and got a 22 inch Gateway HD monitor. Also upgraded the graphics card on my PC and running DVI from it to monitor. Im trying to watch HD movie trailers, they load but Im not getting actual video, I get choppy, slide-show-type video. What gives?

My monitor specs are here http://www.compusa.com/products/prod...ct_code=341975

graphics card: ATI Radeon 9250 VisionteK. 256 mg at 400mhz. 240Mhz VPU, Vga, DVI TV out.

PC, 2800+ AMD 1.2 Gb ram.

Even websites, once loaded they look great but my old 4:3 screen would just BAM and display them, this one prints the page from top to bottom, you can see it every time a page loads like a pull down screen.

Vendzilla · 01-18-2007, 06:14 PM

I would look at your drivers and display settings

Jarmusch · 01-18-2007, 06:16 PM

I can be wrong, but I don't think that radeon is enough to drive a 22" lcd through dvi. Did you try the vga connection? Did the hd videos play smoothly on your CRT?

DarkJedi · 01-18-2007, 06:17 PM

try installing latest drivers and codecs.

make sure you got dual link DVI cable.

Jarmusch · 01-18-2007, 06:21 PM

22" inch lcd's have a resolution of 1680x1050, a dual link cable isn't necessary.

Mr. Mike · 01-18-2007, 06:26 PM

Quote:

Originally Posted by Jarmusch

I can be wrong, but I don't think that radeon is enough to drive a 22" lcd through dvi. Did you try the vga connection? Did the hd videos play smoothly on your CRT?

No it does the same crap. I have a dual monitor setup and both running through the same card. 4:3 using VGA and DVI for the widescreen.

I updated all drivers. Nothing in the settings that I didnt change, test or adjust. Could I have a bad DVI cable? I guess I can try another card but that sucks cause this one wasnt exactly cheap.

Jarmusch · 01-18-2007, 06:37 PM

Ok, I assume you're running at 60hz?

There's two options in the ATI control panel called 'Reduce DVI frequency on high-resolution displays' and 'Alternate DVI operation mode', you could try enabling/disabling them to see if they help.

Try connecting the monitor to a friend's computer or borrow a graphics card from someone to rule out a problem with the card.

Ultimately, the electronics driving the panel can be fucked, in wich case you'll need to take the monitor back and get a new one.

Mr. Mike · 01-18-2007, 06:44 PM

Quote:

Originally Posted by Jarmusch

Ok, I assume you're running at 60hz?

There's two options in the ATI control panel called 'Reduce DVI frequency on high-resolution displays' and 'Alternate DVI operation mode', you could try enabling/disabling them to see if they help.

Try connecting the monitor to a friend's computer or borrow a graphics card from someone to rule out a problem with the card.

Ultimately, the electronics driving the panel can be fucked, in wich case you'll need to take the monitor back and get a new one.

yes 60 hz tried those options, didnt help. I think i might take this monitor back, I also noticed that every single time a page loads it adjusts color, like grays show up dark and you can see it gradually adjusting to lighter color. This sucks.

01-18-2007, 06:12 PM	#1
Mr. Mike Confirmed User Join Date: Aug 2004 Posts: 913	Please help me with my monitor display problems So I finally upgraded and got a 22 inch Gateway HD monitor. Also upgraded the graphics card on my PC and running DVI from it to monitor. Im trying to watch HD movie trailers, they load but Im not getting actual video, I get choppy, slide-show-type video. What gives? My monitor specs are here http://www.compusa.com/products/prod...ct_code=341975 graphics card: ATI Radeon 9250 VisionteK. 256 mg at 400mhz. 240Mhz VPU, Vga, DVI TV out. PC, 2800+ AMD 1.2 Gb ram. Even websites, once loaded they look great but my old 4:3 screen would just BAM and display them, this one prints the page from top to bottom, you can see it every time a page loads like a pull down screen. __________________ Sig for sale. ICQ: 163-545-054

01-18-2007, 06:14 PM	#2
Vendzilla Biker Gnome Industry Role: Join Date: Mar 2004 Location: cell#324 Posts: 23,200	I would look at your drivers and display settings __________________ Webair died? Carbon is not the problem, it makes up 0.041% of our atmosphere , 95% of that is from Volcanos and decomposing plants and stuff. So people in the US are responsible for 13% of the carbon in the atmosphere which 95% is not from Humans, like cars and trucks and stuff and they want to spend trillions to fix it while Solar Panel plants are powered by coal plants think about that

01-18-2007, 06:16 PM	#3
Jarmusch Industry Role: Join Date: May 2003 Posts: 12,464	I can be wrong, but I don't think that radeon is enough to drive a 22" lcd through dvi. Did you try the vga connection? Did the hd videos play smoothly on your CRT?

01-18-2007, 06:17 PM	#4
DarkJedi No Refunds Issued. Industry Role: Join Date: Feb 2001 Location: GFY Posts: 28,300	try installing latest drivers and codecs. make sure you got dual link DVI cable.

01-18-2007, 06:21 PM	#5
Jarmusch Industry Role: Join Date: May 2003 Posts: 12,464	22" inch lcd's have a resolution of 1680x1050, a dual link cable isn't necessary.

01-18-2007, 06:37 PM	#7
Jarmusch Industry Role: Join Date: May 2003 Posts: 12,464	Ok, I assume you're running at 60hz? There's two options in the ATI control panel called 'Reduce DVI frequency on high-resolution displays' and 'Alternate DVI operation mode', you could try enabling/disabling them to see if they help. Try connecting the monitor to a friend's computer or borrow a graphics card from someone to rule out a problem with the card. Ultimately, the electronics driving the panel can be fucked, in wich case you'll need to take the monitor back and get a new one.