Quote:
Originally posted by Probono
If either NIC is bad you would see that there is no link on either one. Also if you have a normal Cat5 cable instead of a cross over cable you would see the same thing.
You need to check your hardware profiles under the control panel and see if either NIC is not working.
If both are working the cable is bad, not plugged in solidly or one of the NICs has a bent pin in it's connector
|
I've replaced the card and the cable (and it's a crossover cable) so I am sure the hardware is ok. I couldn't see hardware profiles in the control panel though - whereabouts is it?